Messages

Many thanks Dirk !

I also tested another AIO PC with a RT3070 based wifi card which is was working flawlessly. But now I have a new box this unsupported card which is why I would like to add a USB adapter.

I noticed RT5370 based usb adapters are fairly inexpensive so I will give them a try.

Thanks monstermania, is there any USB adapter that you could recommend ?

Hello,

Any idea if the access on the guest network can be configured based on the MAC address ?

Thanks !

I added the VPN access rule on the WAN ANY/ALL 1194
And on the VPN tab permit from the 10.10.0.0/24 to all

The guide doesn't mention anything on the LAN tab.

Also, for some reason I don't see that OpenVPN clients drop down.

Thank you for your replies !

I thought the pass rule is the one on step 2
https://docs.opnsense.org/manual/how-tos/sslvpn_client.html
The one for the LAN interface.
Is there another one that's missing ?

You are correct with the 192.168.1.0 network, indeed it's only used for testing and the odds are this might actually be the issue if the pass rule is already there.

Hello,

I followed this guide however on Step 2 - Firewall Rules - allow traffic from the VPN clients to our LAN interface, I don't see the OpenVPN clients drop down mentioned in that screenshot.

WAN has a 192.168.1.0/24 IP (will be moved to a real IP)
LAN has 192.168.2.0/24 IP
VPN has 10.10.0.0/24

The VPN connection is established, I get a 10.10.0.x IP, but I can't reach any of the 192.168.2.x IP from the LAN.

Any idea what I might be missing?
Thank you !

Hi,

Thanks for your reply !
Guess I would have to find another card to replace this one with.

Hi,

I'm trying to install opnsense on a new device, but apparently this chipset is not supported by default(might be too new).

Code Select Expand

root@wifi-guest:~ # sysctl -n net.wlan.devices

root@wifi-guest:~ # pciconf -vl
none2@pci0:4:0:0:       class=0x028000 card=0x40108086 chip=0x31658086 rev=0x81 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'Wireless 3165'
    class      = network


I am running the latest version available and also did an update on the system.
Any thoughts are welcome!

Thanks !

Indeed it was there, I was just blind (or didn't had enough coffee :) ).

Thanks Franco !

Yes, latest one available.

Hi,

Unfortunately I can't see these plugins in the the plugins view(fresh installation).
Am I missing any step ?

Thanks !

Thanks again !

Now the plan is to follow this guide in order to create a guest network:
https://docs.opnsense.org/manual/how-tos/guestnet.html

Thank you for your reply Franco !
Can it be that actually run0 is the one I am looking for?

Code Select Expand

# sysctl -n net.wlan.devices
run0

Code Select Expand


dmesg | grep run0
run0: <1.0> on usbus0
run0: MAC/BBP RT3070 (rev 0x0201), RF RT3020 (MIMO 1T1R), address 74:f0:6d:85:92:dc


Code Select Expand


# pciconf -vl
hostb0@pci0:0:0:0:      class=0x060000 card=0x0f318086 chip=0x0f008086 rev=0x0e hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'Atom Processor Z36xxx/Z37xxx Series SoC Transaction Register'
    class      = bridge
    subclass   = HOST-PCI
vgapci0@pci0:0:2:0:     class=0x030000 card=0x0f318086 chip=0x0f318086 rev=0x0e hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'Atom Processor Z36xxx/Z37xxx Series Graphics & Display'
    class      = display
    subclass   = VGA
ahci0@pci0:0:19:0:      class=0x010601 card=0x0f238086 chip=0x0f238086 rev=0x0e hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'Atom Processor E3800 Series SATA AHCI Controller'
    class      = mass storage
    subclass   = SATA
none0@pci0:0:26:0:      class=0x108000 card=0x0f188086 chip=0x0f188086 rev=0x0e hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'Atom Processor Z36xxx/Z37xxx Series Trusted Execution Engine'
    class      = encrypt/decrypt
hdac0@pci0:0:27:0:      class=0x040300 card=0x0f048086 chip=0x0f048086 rev=0x0e hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'Atom Processor Z36xxx/Z37xxx Series High Definition Audio Controller'
    class      = multimedia
    subclass   = HDA
pcib1@pci0:0:28:0:      class=0x060400 card=0x0f488086 chip=0x0f488086 rev=0x0e hdr=0x01
    vendor     = 'Intel Corporation'
    device     = 'Atom Processor E3800 Series PCI Express Root Port 1'
    class      = bridge
    subclass   = PCI-PCI
pcib2@pci0:0:28:1:      class=0x060400 card=0x0f4a8086 chip=0x0f4a8086 rev=0x0e hdr=0x01
    vendor     = 'Intel Corporation'
    device     = 'Atom Processor E3800 Series PCI Express Root Port 2'
    class      = bridge
    subclass   = PCI-PCI
pcib3@pci0:0:28:2:      class=0x060400 card=0x0f4c8086 chip=0x0f4c8086 rev=0x0e hdr=0x01
    vendor     = 'Intel Corporation'
    device     = 'Atom Processor E3800 Series PCI Express Root Port 3'
    class      = bridge
    subclass   = PCI-PCI
pcib4@pci0:0:28:3:      class=0x060400 card=0x0f4e8086 chip=0x0f4e8086 rev=0x0e hdr=0x01
    vendor     = 'Intel Corporation'
    device     = 'Atom Processor E3800 Series PCI Express Root Port 4'
    class      = bridge
    subclass   = PCI-PCI
ehci0@pci0:0:29:0:      class=0x0c0320 card=0x0f348086 chip=0x0f348086 rev=0x0e hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'Atom Processor Z36xxx/Z37xxx Series USB EHCI'
    class      = serial bus
    subclass   = USB
isab0@pci0:0:31:0:      class=0x060100 card=0x0f1c8086 chip=0x0f1c8086 rev=0x0e hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'Atom Processor Z36xxx/Z37xxx Series Power Control Unit'
    class      = bridge
    subclass   = PCI-ISA
none1@pci0:0:31:3:      class=0x0c0500 card=0x0f128086 chip=0x0f128086 rev=0x0e hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'Atom Processor E3800 Series SMBus Controller'
    class      = serial bus
    subclass   = SMBus
em0@pci0:1:0:0: class=0x020000 card=0x00008086 chip=0x150c8086 rev=0x00 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '82583V Gigabit Network Connection'
    class      = network
    subclass   = ethernet
em1@pci0:2:0:0: class=0x020000 card=0x00008086 chip=0x150c8086 rev=0x00 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '82583V Gigabit Network Connection'
    class      = network
    subclass   = ethernet
em2@pci0:3:0:0: class=0x020000 card=0x00008086 chip=0x150c8086 rev=0x00 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '82583V Gigabit Network Connection'
    class      = network
    subclass   = ethernet
em3@pci0:4:0:0: class=0x020000 card=0x00008086 chip=0x150c8086 rev=0x00 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '82583V Gigabit Network Connection'
    class      = network
    subclass   = ethernet

Hi,

I'm pretty new to OPNsense, trying to add a wifi adapter, any idea how can I add the driver for this ?

Code Select Expand

ugen0.3: <802.11 n WLAN Ralink> at usbus0, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON (450mA)


Configuration index 0

    bLength = 0x0009
    bDescriptorType = 0x0002
    wTotalLength = 0x0043
    bNumInterfaces = 0x0001
    bConfigurationValue = 0x0001
    iConfiguration = 0x0000  <no string>
    bmAttributes = 0x0080
    bMaxPower = 0x00e1

    Interface 0
      bLength = 0x0009
      bDescriptorType = 0x0004
      bInterfaceNumber = 0x0000
      bAlternateSetting = 0x0000
      bNumEndpoints = 0x0007
      bInterfaceClass = 0x00ff  <Vendor specific>
      bInterfaceSubClass = 0x00ff
      bInterfaceProtocol = 0x00ff
      iInterface = 0x0005  <1.0>

     Endpoint 0
        bLength = 0x0007
        bDescriptorType = 0x0005
        bEndpointAddress = 0x0081  <IN>
        bmAttributes = 0x0002  <BULK>
        wMaxPacketSize = 0x0200
        bInterval = 0x0000
        bRefresh = 0x0000
        bSynchAddress = 0x0000

     Endpoint 1
        bLength = 0x0007
        bDescriptorType = 0x0005
        bEndpointAddress = 0x0001  <OUT>
        bmAttributes = 0x0002  <BULK>
        wMaxPacketSize = 0x0200
        bInterval = 0x0000
        bRefresh = 0x0000
        bSynchAddress = 0x0000

     Endpoint 2
        bLength = 0x0007
        bDescriptorType = 0x0005
        bEndpointAddress = 0x0002  <OUT>
        bmAttributes = 0x0002  <BULK>
        wMaxPacketSize = 0x0200
        bInterval = 0x0000
        bRefresh = 0x0000
        bSynchAddress = 0x0000

     Endpoint 3
        bLength = 0x0007
        bDescriptorType = 0x0005
        bEndpointAddress = 0x0003  <OUT>
        bmAttributes = 0x0002  <BULK>
        wMaxPacketSize = 0x0200
        bInterval = 0x0000
        bRefresh = 0x0000
        bSynchAddress = 0x0000

     Endpoint 4
        bLength = 0x0007
        bDescriptorType = 0x0005
        bEndpointAddress = 0x0004  <OUT>
        bmAttributes = 0x0002  <BULK>
        wMaxPacketSize = 0x0200
        bInterval = 0x0000
        bRefresh = 0x0000
        bSynchAddress = 0x0000

     Endpoint 5
        bLength = 0x0007
        bDescriptorType = 0x0005
        bEndpointAddress = 0x0005  <OUT>
        bmAttributes = 0x0002  <BULK>
        wMaxPacketSize = 0x0200
        bInterval = 0x0000
        bRefresh = 0x0000
        bSynchAddress = 0x0000

     Endpoint 6
        bLength = 0x0007
        bDescriptorType = 0x0005
        bEndpointAddress = 0x0006  <OUT>
        bmAttributes = 0x0002  <BULK>
        wMaxPacketSize = 0x0200
        bInterval = 0x0000
        bRefresh = 0x0000
        bSynchAddress = 0x0000



Many thanks !