1
General Discussion / nut service not starting
« on: July 28, 2018, 06:03:48 pm »hello all,
I am a newbie with OPNsense and trying to connect my UPS to my router
OPNsense version is 18.1.13
UPS is APC back-UPS ES 700G
I installed os-nut plugin (v1.0) and connected my UPS to the router
kernel logs show UPS device is correctly detected:
Code: [Select]
ugen0.2: <APC Back-UPS ES 700G FW871.O2 .I USB FWO2> at usbus0
in web UI configuration, I enable NUT service with:
in general settings:
enable NUT : ON
service mode : standalone
name : UPSName
in UPS type/USBHID-driver
enable : ON
extra arguments : port=auto
I apply configuration and try to leave NUT configuration page ... it takes long time (50 seconds, sometimes less)
next, going back to NUT configuration page : NUT is disabled ... configuration was not applied
from command line, I can see :
files in /usr/local/etc/nut are not modified
and running processes:
Code: [Select]
# ps aux | grep ups
root 69797 0.0 0.1 12564 2140 - I 17:43 0:00.00 /usr/local/bin/upsc UPSName@127.0.0.1
root 95901 0.0 0.1 12564 2136 - S 17:45 0:00.00 /usr/local/bin/upsc UPSName@127.0.0.1
root 96022 0.0 0.1 12564 2136 - S 17:45 0:00.00 /usr/local/bin/upsc UPSName@127.0.0.1
root 96293 0.0 0.1 12564 2136 - S 17:45 0:00.00 /usr/local/bin/upsc UPSName@127.0.0.1
root 96486 0.0 0.1 12564 2136 - S 17:45 0:00.00 /usr/local/bin/upsc UPSName@127.0.0.1
root 96922 0.0 0.1 1080528 2832 0 S+ 17:45 0:00.00 grep ups
after rebooting router, I still have same behavior
installing/reinstalling os-nut plugin changes nothing
am I missing some thing in my setup ?
is there somebody to help ?
regards,
Denis