Menu

Show posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Show posts Menu

Topics - phoenixtec

#1
昨天設置了一台新的OPNSENSE主機,使用OPNsense-18.1.6-OpenSSL-vga-amd64,安裝好後升級到18.1.12
我把DHCP 的區段192.168.1.11-->192.168.1.30 設為 aliases1。 可上網時間為18:00-->20:00

我遇到的情況是: 我用手機看網路電視從19:50開始看,但到了20:10還不會斷線,可以繼續看網路電視。
以下兩種情況網路電視APP才會連不上網:
     1. 這時候去防火牆 規則 ,對管理上網時間的那條規則不修改內容僅進行存檔與應用,則網路電視軟體這時才會顯示無法連上網。
     2. 關掉網路電視APP再重新開啟網路電視APP,則網路電視APP也是會顯示連不上網路。

不知道是不是防火牆對已經連線的通訊,即使時間到了也不會去阻擋或封鎖,除非Reload firewall 才會進行套用時間規則。

PS. 我是想用OPNSENSE來管理小孩上網的時間,可是目前的這個情形,只要小孩不把遊戲關掉就可以繼續玩,變成設置的規則會有漏洞。
#2
Chinese - 中文 / OPNsense 17.7 會停在開始畫面
August 15, 2017, 02:23:31 PM
最近拿到一台小電腦有兩個實體有線網路接口且耗電才6W。就拿來裝OPNsense。
我使用的OPNsense 版本是OPNsense-17.7-OpenSSL-vga-amd64
最近發現只要按power 鍵關機後再次開機時都會停在開始畫面,借用網路上連結的照片如下:

當這個現象發生時就須要把鍵盤接上去然後按 "Enter鍵",如此OPNsense 才會繼續執行
是哪裡有問題嗎???
#3
Chinese - 中文 / 如何設定上網時間管理
May 19, 2017, 05:18:33 PM
大家好,

我使用的是OPNsense 17.1.1

因為家裡有小孩想管理上網時間,所以在firewall rule-->lan 裡面加了規則

在18:00-22:00 以外的時間block 孩子電腦的IP

卻發現只要孩子的電腦在22:00前開啟他想玩的遊戲,在超過22:00之後他的遊戲還是可以連上網

如果這時把網線拔掉重新插上,他的電腦就連不上了

是設定的規則有問題嗎??
#4
16.7 Legacy Series / line APP(win10) can't block
October 01, 2016, 05:19:19 PM
Hi,

I setup an aliases "family_users" with IP range from 192.168.1.11 to 192.168.1.99. and a schedule named "children".

I hope to block family_users during schedule "children"

Then I went to firewall-->rule-->lan  set reject family_users during "children".

But I found that some programs like "line" can't be blocked if "line" is already online before schedule
effected.

Please help me to block the IP range during schedule.
#5
Hi,

Today I reinstall my OPNsense and updated to OPNsense 15.7.15-amd64   

I used an Atheros wireless card for access point.

When I set the standard for 802.11ng the interface goes down.

When I set the standard for 802.11g the interface goes up and work at 802.11ng.


#6
hi,

I used OPNsense 15.7.14-i386 with a atheros wireless card "AR5B95", After I setup my access point, I get this messages in the status=>system logs

Sep 26 16:30:08   kernel: ath0: stuck beacon; resetting (bmiss count 4)
Sep 26 16:30:07   kernel: ath0: stuck beacon; resetting (bmiss count 4)
Sep 26 16:30:07   kernel: ath0: stuck beacon; resetting (bmiss count 4)
Sep 26 16:30:07   kernel: ath0: stuck beacon; resetting (bmiss count 4)
Sep 26 16:30:07   kernel: ath0: stuck beacon; resetting (bmiss count 4)
Sep 26 16:30:06   kernel: ath0: stuck beacon; resetting (bmiss count 4)
Sep 26 16:30:06   kernel: ath0: stuck beacon; resetting (bmiss count 4)
Sep 26 16:30:06   kernel: ath0: stuck beacon; resetting (bmiss count 4)
Sep 26 16:30:06   kernel: ath0: stuck beacon; resetting (bmiss count 4)
Sep 26 16:30:05   kernel: ath0: stuck beacon; resetting (bmiss count 4)

Are there any way to solve this??