Messages

1

Virtual private networks / Wireguard installed in my LAN VPS is not work

« on: August 18, 2024, 08:10:08 am »

Hi there all,
I choose to install Wireguard in a ProxMox VPS on my LAN cause I like the Wireguard docker web interface.
So my Wireguard is not installed inside Opnsense.

I have open the 51820 port and I also forwarded same port to my VPS where Wireguard run.
I can connect my client and also I so in the LOG that it make the connection.
But... I cant use the client, no data is arrive when I want to navigate.

Someone have some ideea please ?
Thanks in advance.
Denis

2

General Discussion / Re: Local services work... but only through wan

« on: November 25, 2023, 12:12:43 pm »

I used the Unbound service and I put the services names in the Host Overrides.
And now all the local services it's work :-)

Thanks a lot for the help
Denis

3

General Discussion / Re: I can't print from WiFi ...but I can ping the printer

« on: November 25, 2023, 12:09:11 pm »

I have solve the issue :-)

I uninstalled the printer and then I installed it via TCP/IP and no via normale Windows procedure (no WSD I think)

Thanks for the help :-)
Denis

4

General Discussion / Re: I can't print from WiFi ...but I can ping the printer

« on: November 25, 2023, 05:00:48 am »

Thanks for the answer
I just read something about WSD... but I don't really understand witch is the diference between normal PC ethernet interface and printer WSD.

My printer is connected via ethernet cable and have IP in the format 192.168.1.xxx (Lan_Cable)
My wifi lan have the format 192.168.1.xxx. (Lan_WiFi)

So if my pc is connected via cable, I can print.
But if is connected via WiFi can not print... but I cand access the printed webserver, so I can see it.
Is there something more that I must do in order to have printing service from a LAN to the other LAN please ?

Thanks a lot again
Denis 

5

General Discussion / I can't print from WiFi ...but I can ping the printer [SOLVED]

« on: November 24, 2023, 07:45:07 pm »

Hi there all,
I have 2 interface on my LAN side of OpnSense
one is the cable LAN
one is the WiFi LAN
The printer is installed on the cable LAN.

When my PC have the cable I can print.
When my PC have only WiFI connection it can't print... but I can open the printer integrated webserver.

The firewall log give me all green on the printer IP.

Anyone have some ideea please ?
Thanks in advance
Denis

6

General Discussion / Re: Local services work... but only through wan

« on: November 24, 2023, 07:25:08 am »

Thanks a lot for your answer
I found this link (https://docs.opnsense.org/manual/how-tos/nat_reflection.html) that I'll study and I hope I'll resolve the issue.

In the mean time I understand an important think...

The DNS setting of casamia.com send the request to my WAN2 interface IP.
(this because the ADSL line (WAN2) is more stabile than the FWA (WAN1) line)

So if I stop the WAN1 gateway and I use the WAN2 gateway (ADSL) for the connection
in this case the tracert use only 2 points:

Code: [Select]

C:\Users\denis>tracert  casamia.com

Traccia instradamento verso casamia.com [4.44.2.22]
su un massimo di 30 punti di passaggio:

  1    <1 ms    <1 ms    <1 ms  192.168.1.1
  2     1 ms    <1 ms    <1 ms  net-4-44-2-22.cust.vodafonedsl.it [4.44.2.22]


Now in OpenSense I use a failover gateway (2 x WAN)
in order to have the connection from myhome versus internet using ADSL(WAN2) if FWA(WAN1) is stop.

So I have a new question if I can permit...
Is possible to build a failover also from internet versus myhome ?
I use Cloudflare DNS... maybe I can make a script that update the DNS Cloudflare IP with the actual WANx connection IP.

Thanks a lot for the help.
Denis

7

General Discussion / Re: Local services work... but only through wan

« on: November 23, 2023, 01:13:02 pm »

Someone there can give me al last little idea please ? :-)

8

General Discussion / Local services work... but only through wan [SOLVED]

« on: November 20, 2023, 03:49:08 pm »

Hi there all,
this days I just installed OpenSense on a PC with 6 X LAN interface.

I have in my home some services that I use when I'm outside
But I use same services also when I'm at home.

The situation that I have is:

Code: [Select]

LAN1 - for home PC (192.168.1.x)
LAN2 - for all WiFi thinks (192.168.2.x)
WAN1 - for 5G FWA connect (192.168.100.x)
WAN2 - for ADSL connect (192.168.200.x)
On LAN1 I have a server that run Nginx Proxy Manager that receive (port 443, 80) the request from outside,
and send the request on various services inside my home.

When I call a service from outside all work very well.
But when I call a service from inside my home, it's work, but some service ask me a user and password like I'm outside of my home.

So in this case I make a tracert in order to see witch is the way that connection do.
Here is the result:

Code: [Select]

C:\Users\denis>tracert service.casamia.com

Traccia instradamento verso casamia.com [4.44.2.22]
su un massimo di 30 punti di passaggio:

  1    <1 ms    <1 ms    <1 ms  192.168.1.1
  2     1 ms     1 ms     1 ms  192.168.100.1
  3    69 ms   314 ms    82 ms  151.5.187.213
  4    30 ms    36 ms    30 ms  10.75.83.65
  5    38 ms    21 ms    35 ms  151.7.50.216
  6    31 ms    32 ms    27 ms  151.6.3.182
  7    28 ms    21 ms    93 ms  151.6.1.180
  8    61 ms    49 ms    34 ms  vodafone.mix-it.net [217.29.67.29]
  9   142 ms    95 ms    26 ms  185.210.48.38
 10    41 ms    35 ms    92 ms  10.177.82.144
 11    44 ms   139 ms    45 ms  10.177.82.144
 12    81 ms   127 ms    56 ms  192.168.150.6
 13    36 ms    39 ms    31 ms  net-4-44-2-22.cust.vodafonedsl.it [4.44.2.22]

Traccia completata.

I also use Pihole on my DHCPv4 connections,
than Pihole upstream versus Unbound DNS (inside OpnSense)

In Unbound DNS I have ticked
Register DHCP Leases and Register DHCP Static Mappings.
I have also put my casamia.com in the  System: General setup.
 
It seems little complicated, but surely with little help of some of you,
maybe I can solve this problem.

Thanks all in advance
Denis