Messages

I set up a WG tunnel, it works with opnsense, it pings everything and accesses all connection resources.
But when I try to ping with mikritik, I see that the traffic goes to opnsense, on it I see that it gets stuck and does not send back to this address

Tell me where to look for problems.
WG network 10.10.10.0, local network 10.10.20.0/24, remote client mikritik 192.168.0.1/24
I'm trying to get to static addresses.

With opnsense I have access to everything, but for some reason there is no access with mikritik.
With mikritik, the ping goes to opnsense, but does not open it in the browser

Good afternoon, I'm a little confused and do not understand why this is happening.
I have proxmox+opnsense

I perform a clean installation, having previously made 2 virtual cards, for the Internet and a local network.
Wan-vtnet0
lan-vtnet1

During installation, I set wan (router) = wan and lan (router) = lan, everything is installed successfully, I try to do 'set interface ip addess', configure wan to register my static ip, successfully ping from the console passes the Internet, but the GUI does not work.

You have to change wan (router) = lan and lan (router) = wan, after this setting, ping and gui start working.

But after all, wan should be an external interface, not a local one, and vice versa, but in order for the GUI to work, you have to change everything.

Please help me figure out why this is so, maybe I'm doing something wrong.