Messages

Hi.
No I mean two LANs (em0 and em3) to one WAN (em1)

Hi.

Have searched but not found how to configure two different lan to a wan connection. I also have a gateway group for failover.
Someone who has a solution, I would be grateful.  ;)

/Janne

Hi.I had to read it properly so I found the error.I got disable NAT traversal and created a firewall rule.This was the difference from the older version.Shouldn't the program create these things when setting up IPsec?Thanks.

Hi.
Thanks for the tips.
I discovered that I was incredibly wrong with 3 different USB drives.
Everything worked ok with installation from the ground up with USB stick no.4.
Thanks again but the error was mine but I have never been involved with such a bug on USB.I got no error message when I installed img on USB but the firewall couldn't read them, it just locked.
:) ;)

Date   Message
Sep 10 09:59:34   charon: 15[CFG] received stroke: route 'con1'
Sep 10 09:59:34   charon: 15[CFG] added configuration 'con1'
Sep 10 09:59:34   charon: 15[CFG] received stroke: add connection 'con1'
Sep 10 09:59:34   charon: 16[CFG] deleted connection 'con1'
Sep 10 09:59:34   charon: 16[CFG] received stroke: delete connection 'con1'
Sep 10 09:59:34   charon: 15[CFG] received stroke: unroute 'con1'
Sep 10 09:59:34   charon: 16[CFG] rereading crls from '/usr/local/etc/ipsec.d/crls'
Sep 10 09:59:34   charon: 16[CFG] rereading attribute certificates from '/usr/local/etc/ipsec.d/acerts'
Sep 10 09:59:34   charon: 16[CFG] rereading ocsp signer certificates from '/usr/local/etc/ipsec.d/ocspcerts'
Sep 10 09:59:34   charon: 16[CFG] rereading aa certificates from '/usr/local/etc/ipsec.d/aacerts'
Sep 10 09:59:34   charon: 16[CFG] rereading ca certificates from '/usr/local/etc/ipsec.d/cacerts'
Sep 10 09:59:34   charon: 16[CFG] expanding file expression '/usr/local/etc/ipsec.secrets.opnsense.d/*.secrets' failed
Sep 10 09:59:34   charon: 16[CFG] loaded IKE secret for 83.233.10.58
Sep 10 09:59:34   charon: 16[CFG] loading secrets from '/usr/local/etc/ipsec.secrets'
Sep 10 09:59:34   charon: 16[CFG] rereading secrets

Hi.
Are there any problems with IPSec in the 19.7.3 version? Have tried a lot of changes but it does not want to work. It worked effortlessly on ver. 16.7

Another picture.

Hi.I am in desperate need of getting these units up and running as soon as possible.
Very grateful for help how to do.

Hi.Here comes the screenshot.

Hi.Tried to update two older devices but failed .....
Now they have locked themselves and I will not go any further than it looks in the picture.
However I try it is not possible to install 19.7
What to do? :-\

Hi.Sorry you didn't respond, been sick. ;)
I have not used interface groups. Everything works ok from the router but I can't get any traffic into the interface I programmed as backup.
I have also tried moving my fixed connection between gateways but it is not possible on backup gateway.
I also use DYN dns to control the traffic and ip is changed but the traffic does not work inward on the backup gateway.?????
What am I doing wrong? ;) :(

Still can't get traffic into WAN2.
Followed the instructions according to documentation but it does not want to work.
Has for safety moved existing incoming WAN1 to WAN2, failover works perfectly ok, but it is not possible to access from outside and in which works perfectly on WAN1.  ::)

 :)
Hi.It worked better with 19.7.3.
Now you can see the Gateways that you created and couldn't remove that probably created the problems.
Have still problems to make failover to work but that is in an other tread.

Hi.Where can I find how to configure traffic over backup wan?
I have configured failover and it works outwards but how do you get all traffic to work both outbound and inbound on wan2 and on wan1? Have looked and read but .....
Would have been good if there was a wizard for backup wan
Grateful for help.

 :) ;)