Messages

Up :)

Hi guys, I keep having problems with maltrail. I tried again to reinstall it, hoping that the problems had been solved, but despite the plugin installs correctly, maltrailserver does not start... the red square remains and it is not possible to start it... Any ideas?

I've tried to reinstall Maltrail, but still not working. Can't start the plugin...

Hi guys, I've updated the firewall to version 22.7.3_2 and reinstalled maltrail (1.9-0.48), but unfortunately the server does not start, the red icon remains. I tried to do a healtcheck and no error is detected...ideas about where the problem might be?

I'll wait the next update!
Thank you, Franco!

If the FreeBSD ports package registers maltrail.conf the checksum mismatch will occur when the plugin writes its own configuration. In that case maltrail.conf should be a "sample" file in the port to avoid this issue.

Not much to do where other than wait for Michael to address this in the port.


Cheers,
Franco

Ok thank you. The fact, then, that the sensor does not register anything, at this point, I guess is due to the problem of the configuration file, correct?

Hi guys, I noticed that the py37-markupsafe package was still present after updating to version 22.7 and therefore I removed it from ssh with the command

Code Select Expand

# pkg remove py37-markupsafe without problems. I decided to reinstall mailtrail after last year's problems that caused the uncontrolled increase in swap memory but I found some problems. Installed maltrail, the plugin does not start: if I do a health-check the error that arises is

Code Select Expand

maltrail-0.47: checksum mismatch for /usr/local/share/maltrail/maltrail.conf
By reinstalling the package, this error disappears, the plugin starts but does not record anything, the health-check does not release any errors but the maltrail's log remains empty.
If I restart the machine, the mismatch checksum of the.conf file appears again.
Do you have any ideas to solve the problem?

Solved changing the system language. the Italian translation breaks the webgui.

Ho avuto la malsana idea di fare l'upgrade alla 22.7...a parte che non funziona più nulla a livello di webgui (come ho scritto nel forum inglese).
Ma parliamo della traduzione italiana tradotta col traduttore automatico...log--->tronco d'albero, captive portal--->portale prigioniero...

https://raw.githubusercontent.com/opnsense/lang/master/it_IT.po

Avete avuto anche voi problemi del tipo?

***edit***
ho risolto i problemi cambiando lingua: la traduzione italiana manda in palla la webgui

Sì era attivo...ormai è passato un po' di tempo ma mi ricordo che avevo disattivato un paio di addon che usavano quella versione di pyton ed avevo risolto il problema.
***
edit
***
Era maltrail l'addon che dava problemi. Ho provato a reinstallarlo ora, dopo qualche mese di stop...vediamo se hanno corretto.

Good evening guys, after the last update I noticed that the webgui is totally not working: you can not navigate the menus (clicking nothing happens and the widget screen is totally white) and the translation into Italian is really bizarre (it seems autotranslated...). Did it happen only to me?

Buona sera ragazzi, dopo quasi 3 mesi dalla prima segnalazione, ancora, a quanto ho capito non sono stati risolti i problemi di esaurimento memoria ram e swap a seguito dell'aggiornamento di maltrail e python...
E' dall'aggiornamento alla 21.7.1 che io (e non solo) ho riscontrato tale problematica.
Esiste qualche soluzione?
Grazie in anticipo.

After 3 months still no solution... :-\

Still no official solution to this problem?

With the update to version 21.7.2_1 the extent of the problem has significantly decreased. Now the swap memory grows by about 1Gb every 3 days... anyway the problem remains and has not been solved...