Messages

No help?

Hi ,

I'm new to opnsense ,  i'm trying to configure a test vm machine

But i can't  do a simple thing.

My configuration is vmware esx 6.5

vm test opnsense   LAN 172.22.199.26 /24   WAN Public IP  whit is Outside  Gateway   
                             route 172.22.201.0/24 using 172.22.199.1 as internal gateway

core switch ( routing )  vlan 199  - 172.22.199.1
                                  vlan 201  - 172.22.201.1
                                  ip route 0.0.0.0  0.0.0.0 172.22.199.26

test pc machine 172.22.201.121 / 24  whit gateway 172.22.201.1


from 172.22.201.121 can reach correctly 172.22.199.26 , but is impossible to reach outside internet
i try to make all sort of rules  , * *  any from any to any ecc , specific rules from 172.22.201.0/24 to  ecc.
but no way , no internet from opnsense .

From firewall log is see this :
   wan   Apr 11 16:31:32 172.22.201.121:59435   217.72.40.21:80   tcp   let out anything from firewall host itself

What i miss , normally whit Endian o Sophos firewall o Fortigate whit similar configuration i have no problem


P.S.
Other strange thing
I make a open vpn server config , and i can reach alla internal vlan whit no probleam..

Thanks Mark

Hi,


I'm experiencing the same problem,
I set the gateways to internal sub net (switch core) sets reach all the vlan behind this
openvpn client function and reaches them.
but from these I can't access the internet, even if the firewall log says allowed traffic.

can it be a vmware vswitch problem?