Messages

1

22.1 Legacy Series / Re: WAN interface flapping with 22.1.2

« on: March 06, 2022, 04:33:42 pm »

I have also the same problem as described upper, I'm using HP 600 G2 DM with Intel NIC and also I'm using MAC spoofing. Problems with flapping started after the update, I also tried a fresh install, but without results. With older rls It started to work normally so there must be some bug in this rls.

2

20.1 Legacy Series / Re: Timeout while connecting to the selected mirror.

« on: February 16, 2020, 05:00:12 pm »

It works, great.

3

20.1 Legacy Series / Re: Timeout while connecting to the selected mirror.

« on: February 16, 2020, 04:58:35 pm »

I'll try that. Thanks a lot

4

20.1 Legacy Series / Timeout while connecting to the selected mirror.

« on: February 16, 2020, 10:18:24 am »

Hi I have problem with updates. If I select any update server from list, always I get error message
Timeout while connecting to the selected mirror.

Can you help me? Internet connection is working properly. Actually I have 20.1 build, OpenSSL, branch Production. I tried Deciso, Aalborg, dns-root.de and many others, but without success.

5

20.1 Legacy Series / Re: Upgrading from 19.7.10 to 20.1

« on: February 07, 2020, 06:39:24 pm »

I'm unable to update from 19.7.10 to 20.1
I used commands with results:

root@GW_FW:~ # opnsense-update -e
Updating OPNsense repository catalogue...
pkg-static: Repository OPNsense has a wrong packagesite, need to re-create database
Fetching meta.txz: 100%    1 KiB   1.5kB/s    00:01
pkg-static: No trusted public keys found
repository OPNsense has no meta file, using default settings
Fetching packagesite.txz: 100%  177 KiB 181.6kB/s    00:01
pkg-static: No trusted public keys found
Unable to update repository OPNsense
Updating SunnyValley repository catalogue...
SunnyValley repository is up to date.
Error updating repositories!

I tried more installation sources from GUI for example default, Amsterdam, Deciso with the same result.
I have OpenSSL variant - production release channel.

This command opnsense-update -sn "20.1\/latest" ran over two hours, without result. Any help please?

6

19.7 Legacy Series / Re: 2nd LAN interface issue

« on: December 02, 2019, 09:14:58 am »

Okay I try to use .2.0 network thanks a lot.

7

19.7 Legacy Series / Re: 2nd LAN interface issue

« on: December 01, 2019, 08:40:03 pm »

I tried .5 with mask /27 but still without success

8

19.7 Legacy Series / 2nd LAN interface issue

« on: November 30, 2019, 09:13:43 pm »

Hi,
I have a problem. My FW is running on one builtin NIC system (assigned for WAN) so I'm using USB LAN adapter (assigned for LAN) and I need to add one more USB NIC. 1st is configured as
IP address 192.168.1.1/30 so the other side (WiFi router) has IP 192.168.1.2 and connection works perfectly. But if I connect 2nd adapter so I set 192.168.1.4 and the other side 192.168.1.5, so connection stops working on both interfaces and I'm unable to access to the internet. Can you anybody help me please, ho I must configure that interfaces correctly?

9

19.7 Legacy Series / Re: Move to FreeBSD 12?

« on: April 29, 2019, 08:53:09 pm »

Why is better FreeBSD 12 instead of 11.3? I saw on FreeBSD webpage, that both releases exist side by side.  Can you someone explain me differences between releases? Thank you.

10

19.1 Legacy Series / Re: Atheros 10k support

« on: March 28, 2019, 10:22:46 am »

I know, but this port should be working at least in some basic modes. I haven't knowledge to compile OPN with this driver for testing

11

19.1 Legacy Series / Atheros 10k support

« on: March 27, 2019, 10:07:32 am »

Hi, please is possible to add ath10k support to next build or update? On link below is FreeBSD port for ath10k driver and it should works. I hope that many users here will be happy for Atheros AC chipset support. Thank you very very much at least for test that.
https://github.com/Geramy/athp

12

19.1 Legacy Series / Re: Realtek RTL8153 USB NIC problems

« on: March 02, 2019, 11:22:08 am »

So my problem is partially solved by add command below to loader.conf.local
kldload if_ure

Now my NIC working at least 100mbit/s. Network speed meter shows  D:95-98mbit/s U: around 30mbit/s, so upload is slower, 'cause without OPNSense firewall I had speeds D:98/U:95-98mbit/s, but it's better than 10mbit. I don't know why. And about my Intel 8260ac WLAN card, I'm unable to switch it to adhoc, or station mode. CLI says, that IBSS mode is not supported, so maybe driver fault, because I have the same one in my OpenWRT based router and there It works normally.

13

19.1 Legacy Series / Re: 19.1 development milestones

« on: February 28, 2019, 10:09:12 pm »

I read something about new Realtek drivers. Does It bring better USB NIC support with Realtek chips? I have one but on 10mbit instead of 1gbit

14

19.1 Legacy Series / Re: Realtek RTL8153 USB NIC problems

« on: February 28, 2019, 04:15:24 pm »

On WLAN Name of the interface, block private networks, setting of IPv4 and IPv6, MTU, MAC, as the same as normal wired interface.
On Realtek interface i can't see settings about linkspeed but on internal interface I see that option.
If i select Wireless tab i see card with MAC but if I tick "create" so it shows me error "Error in create in Infrastructure mode BSS. Device wlan0 is not support create more that one clone in selected mode."

15

19.1 Legacy Series / Realtek RTL8153 USB NIC & Intel 8260ac problems

« on: February 27, 2019, 09:41:38 pm »

I have problems with Realtek RTL8153 USB 3.0 NIC. Inerface working, but only on 10mbit/s speed. I checked usbconfig, I tried everything, what I found on forums, but I'm not able to switch this interface (recgnized as ue0) at least to 100mbit/s (100baseTX). Cable, and router are OK. Also I have problem with m.2 WLAN card Intel 8260AC. I can see in ifconfig wlan0, no carrier, etc... on this card, but I'm unable to configure this card to provide WiFi connection. I need at least make USB NIC working, the best on 1gbit/s. I tried command "media 100baseT or 100baseTX, 1000BaseT full-duplex, ...) many combinations, but everytime commandline said bad parameter or bad value. Can you fix that or help me?