Topics

1

20.1 Legacy Series / Timeout while connecting to the selected mirror.

« on: February 16, 2020, 10:18:24 am »

Hi I have problem with updates. If I select any update server from list, always I get error message
Timeout while connecting to the selected mirror.

Can you help me? Internet connection is working properly. Actually I have 20.1 build, OpenSSL, branch Production. I tried Deciso, Aalborg, dns-root.de and many others, but without success.

2

19.7 Legacy Series / 2nd LAN interface issue

« on: November 30, 2019, 09:13:43 pm »

Hi,
I have a problem. My FW is running on one builtin NIC system (assigned for WAN) so I'm using USB LAN adapter (assigned for LAN) and I need to add one more USB NIC. 1st is configured as
IP address 192.168.1.1/30 so the other side (WiFi router) has IP 192.168.1.2 and connection works perfectly. But if I connect 2nd adapter so I set 192.168.1.4 and the other side 192.168.1.5, so connection stops working on both interfaces and I'm unable to access to the internet. Can you anybody help me please, ho I must configure that interfaces correctly?

3

19.1 Legacy Series / Atheros 10k support

« on: March 27, 2019, 10:07:32 am »

Hi, please is possible to add ath10k support to next build or update? On link below is FreeBSD port for ath10k driver and it should works. I hope that many users here will be happy for Atheros AC chipset support. Thank you very very much at least for test that.
https://github.com/Geramy/athp

4

19.1 Legacy Series / Realtek RTL8153 USB NIC & Intel 8260ac problems

« on: February 27, 2019, 09:41:38 pm »

I have problems with Realtek RTL8153 USB 3.0 NIC. Inerface working, but only on 10mbit/s speed. I checked usbconfig, I tried everything, what I found on forums, but I'm not able to switch this interface (recgnized as ue0) at least to 100mbit/s (100baseTX). Cable, and router are OK. Also I have problem with m.2 WLAN card Intel 8260AC. I can see in ifconfig wlan0, no carrier, etc... on this card, but I'm unable to configure this card to provide WiFi connection. I need at least make USB NIC working, the best on 1gbit/s. I tried command "media 100baseT or 100baseTX, 1000BaseT full-duplex, ...) many combinations, but everytime commandline said bad parameter or bad value. Can you fix that or help me?