Messages

1

Hardware and Performance / Re: Intel Wireless 3165 support

« on: February 20, 2018, 09:25:57 am »

Many thanks Dirk !

I also tested another AIO PC with a RT3070 based wifi card which is was working flawlessly. But now I have a new box this unsupported card which is why I would like to add a USB adapter.

I noticed RT5370 based usb adapters are fairly inexpensive so I will give them a try.

2

Hardware and Performance / Re: Intel Wireless 3165 support

« on: February 19, 2018, 01:43:22 pm »

Thanks monstermania, is there any USB adapter that you could recommend ?

3

Tutorials and FAQs / Guest Network

« on: January 10, 2018, 11:32:11 am »

Hello,

Any idea if the access on the guest network can be configured based on the MAC address ?

Thanks !

4

Tutorials and FAQs / Re: SSL VPN

« on: December 10, 2017, 11:06:59 am »

I added the VPN access rule on the WAN ANY/ALL 1194
And on the VPN tab permit from the 10.10.0.0/24 to all

The guide doesn't mention anything on the LAN tab.

Also, for some reason I don't see that OpenVPN clients drop down.

5

Tutorials and FAQs / Re: SSL VPN

« on: December 09, 2017, 09:01:16 am »

Thank you for your replies !

I thought the pass rule is the one on step 2
https://docs.opnsense.org/manual/how-tos/sslvpn_client.html
The one for the LAN interface.
Is there another one that's missing ?

You are correct with the 192.168.1.0 network, indeed it's only used for testing and the odds are this might actually be the issue if the pass rule is already there.

6

Tutorials and FAQs / SSL VPN

« on: December 08, 2017, 09:38:18 pm »

Hello,

I followed this guide however on Step 2 - Firewall Rules - allow traffic from the VPN clients to our LAN interface, I don't see the OpenVPN clients drop down mentioned in that screenshot.

WAN has a 192.168.1.0/24 IP (will be moved to a real IP)
LAN has 192.168.2.0/24 IP
VPN has 10.10.0.0/24

The VPN connection is established, I get a 10.10.0.x IP, but I can't reach any of the 192.168.2.x IP from the LAN.

Any idea what I might be missing?
Thank you !

7

Hardware and Performance / Re: Intel Wireless 3165 support

« on: November 23, 2017, 04:27:00 pm »

Hi,

Thanks for your reply !
Guess I would have to find another card to replace this one with.

8

Hardware and Performance / Intel Wireless 3165 support

« on: November 23, 2017, 10:36:01 am »

Hi,

I'm trying to install opnsense on a new device, but apparently this chipset is not supported by default(might be too new).

Code: [Select]

root@wifi-guest:~ # sysctl -n net.wlan.devices

root@wifi-guest:~ # pciconf -vl
none2@pci0:4:0:0:       class=0x028000 card=0x40108086 chip=0x31658086 rev=0x81 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'Wireless 3165'
    class      = network

I am running the latest version available and also did an update on the system.
Any thoughts are welcome!

Thanks !

9

Documentation and Translation / Re: Docs for c-icap + ClamAV released

« on: November 22, 2017, 08:41:01 pm »

Indeed it was there, I was just blind (or didn't had enough coffee ).

Thanks Franco !

10

Documentation and Translation / Re: Docs for c-icap + ClamAV released

« on: October 05, 2017, 05:42:48 pm »

Yes, latest one available.

11

Documentation and Translation / Re: Docs for c-icap + ClamAV released

« on: October 03, 2017, 02:49:52 pm »

Hi,

Unfortunately I can't see these plugins in the the plugins view(fresh installation).
Am I missing any step ?

Thanks !

12

Hardware and Performance / Re: ugen0.3: <802.11 n WLAN Ralink> at usbus0, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=

« on: September 27, 2017, 10:43:48 am »

Thanks again !

Now the plan is to follow this guide in order to create a guest network:
https://docs.opnsense.org/manual/how-tos/guestnet.html

13

Hardware and Performance / Re: ugen0.3: <802.11 n WLAN Ralink> at usbus0, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=

« on: September 27, 2017, 08:33:35 am »

Thank you for your reply Franco !
Can it be that actually run0 is the one I am looking for?

Code: [Select]

# sysctl -n net.wlan.devices
run0

Code: [Select]

dmesg | grep run0
run0: <1.0> on usbus0
run0: MAC/BBP RT3070 (rev 0x0201), RF RT3020 (MIMO 1T1R), address 74:f0:6d:85:92:dc


Code: [Select]

# pciconf -vl
hostb0@pci0:0:0:0:      class=0x060000 card=0x0f318086 chip=0x0f008086 rev=0x0e hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'Atom Processor Z36xxx/Z37xxx Series SoC Transaction Register'
    class      = bridge
    subclass   = HOST-PCI
vgapci0@pci0:0:2:0:     class=0x030000 card=0x0f318086 chip=0x0f318086 rev=0x0e hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'Atom Processor Z36xxx/Z37xxx Series Graphics & Display'
    class      = display
    subclass   = VGA
ahci0@pci0:0:19:0:      class=0x010601 card=0x0f238086 chip=0x0f238086 rev=0x0e hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'Atom Processor E3800 Series SATA AHCI Controller'
    class      = mass storage
    subclass   = SATA
none0@pci0:0:26:0:      class=0x108000 card=0x0f188086 chip=0x0f188086 rev=0x0e hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'Atom Processor Z36xxx/Z37xxx Series Trusted Execution Engine'
    class      = encrypt/decrypt
hdac0@pci0:0:27:0:      class=0x040300 card=0x0f048086 chip=0x0f048086 rev=0x0e hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'Atom Processor Z36xxx/Z37xxx Series High Definition Audio Controller'
    class      = multimedia
    subclass   = HDA
pcib1@pci0:0:28:0:      class=0x060400 card=0x0f488086 chip=0x0f488086 rev=0x0e hdr=0x01
    vendor     = 'Intel Corporation'
    device     = 'Atom Processor E3800 Series PCI Express Root Port 1'
    class      = bridge
    subclass   = PCI-PCI
pcib2@pci0:0:28:1:      class=0x060400 card=0x0f4a8086 chip=0x0f4a8086 rev=0x0e hdr=0x01
    vendor     = 'Intel Corporation'
    device     = 'Atom Processor E3800 Series PCI Express Root Port 2'
    class      = bridge
    subclass   = PCI-PCI
pcib3@pci0:0:28:2:      class=0x060400 card=0x0f4c8086 chip=0x0f4c8086 rev=0x0e hdr=0x01
    vendor     = 'Intel Corporation'
    device     = 'Atom Processor E3800 Series PCI Express Root Port 3'
    class      = bridge
    subclass   = PCI-PCI
pcib4@pci0:0:28:3:      class=0x060400 card=0x0f4e8086 chip=0x0f4e8086 rev=0x0e hdr=0x01
    vendor     = 'Intel Corporation'
    device     = 'Atom Processor E3800 Series PCI Express Root Port 4'
    class      = bridge
    subclass   = PCI-PCI
ehci0@pci0:0:29:0:      class=0x0c0320 card=0x0f348086 chip=0x0f348086 rev=0x0e hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'Atom Processor Z36xxx/Z37xxx Series USB EHCI'
    class      = serial bus
    subclass   = USB
isab0@pci0:0:31:0:      class=0x060100 card=0x0f1c8086 chip=0x0f1c8086 rev=0x0e hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'Atom Processor Z36xxx/Z37xxx Series Power Control Unit'
    class      = bridge
    subclass   = PCI-ISA
none1@pci0:0:31:3:      class=0x0c0500 card=0x0f128086 chip=0x0f128086 rev=0x0e hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'Atom Processor E3800 Series SMBus Controller'
    class      = serial bus
    subclass   = SMBus
em0@pci0:1:0:0: class=0x020000 card=0x00008086 chip=0x150c8086 rev=0x00 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '82583V Gigabit Network Connection'
    class      = network
    subclass   = ethernet
em1@pci0:2:0:0: class=0x020000 card=0x00008086 chip=0x150c8086 rev=0x00 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '82583V Gigabit Network Connection'
    class      = network
    subclass   = ethernet
em2@pci0:3:0:0: class=0x020000 card=0x00008086 chip=0x150c8086 rev=0x00 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '82583V Gigabit Network Connection'
    class      = network
    subclass   = ethernet
em3@pci0:4:0:0: class=0x020000 card=0x00008086 chip=0x150c8086 rev=0x00 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '82583V Gigabit Network Connection'
    class      = network
    subclass   = ethernet

14

Hardware and Performance / [SOLVED] ugen0.3: <802.11 n WLAN Ralink>

« on: September 26, 2017, 10:42:50 pm »

Hi,

I'm pretty new to OPNsense, trying to add a wifi adapter, any idea how can I add the driver for this ?

Code: [Select]

ugen0.3: <802.11 n WLAN Ralink> at usbus0, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON (450mA)


 Configuration index 0

    bLength = 0x0009
    bDescriptorType = 0x0002
    wTotalLength = 0x0043
    bNumInterfaces = 0x0001
    bConfigurationValue = 0x0001
    iConfiguration = 0x0000  <no string>
    bmAttributes = 0x0080
    bMaxPower = 0x00e1

    Interface 0
      bLength = 0x0009
      bDescriptorType = 0x0004
      bInterfaceNumber = 0x0000
      bAlternateSetting = 0x0000
      bNumEndpoints = 0x0007
      bInterfaceClass = 0x00ff  <Vendor specific>
      bInterfaceSubClass = 0x00ff
      bInterfaceProtocol = 0x00ff
      iInterface = 0x0005  <1.0>

     Endpoint 0
        bLength = 0x0007
        bDescriptorType = 0x0005
        bEndpointAddress = 0x0081  <IN>
        bmAttributes = 0x0002  <BULK>
        wMaxPacketSize = 0x0200
        bInterval = 0x0000
        bRefresh = 0x0000
        bSynchAddress = 0x0000

     Endpoint 1
        bLength = 0x0007
        bDescriptorType = 0x0005
        bEndpointAddress = 0x0001  <OUT>
        bmAttributes = 0x0002  <BULK>
        wMaxPacketSize = 0x0200
        bInterval = 0x0000
        bRefresh = 0x0000
        bSynchAddress = 0x0000

     Endpoint 2
        bLength = 0x0007
        bDescriptorType = 0x0005
        bEndpointAddress = 0x0002  <OUT>
        bmAttributes = 0x0002  <BULK>
        wMaxPacketSize = 0x0200
        bInterval = 0x0000
        bRefresh = 0x0000
        bSynchAddress = 0x0000

     Endpoint 3
        bLength = 0x0007
        bDescriptorType = 0x0005
        bEndpointAddress = 0x0003  <OUT>
        bmAttributes = 0x0002  <BULK>
        wMaxPacketSize = 0x0200
        bInterval = 0x0000
        bRefresh = 0x0000
        bSynchAddress = 0x0000

     Endpoint 4
        bLength = 0x0007
        bDescriptorType = 0x0005
        bEndpointAddress = 0x0004  <OUT>
        bmAttributes = 0x0002  <BULK>
        wMaxPacketSize = 0x0200
        bInterval = 0x0000
        bRefresh = 0x0000
        bSynchAddress = 0x0000

     Endpoint 5
        bLength = 0x0007
        bDescriptorType = 0x0005
        bEndpointAddress = 0x0005  <OUT>
        bmAttributes = 0x0002  <BULK>
        wMaxPacketSize = 0x0200
        bInterval = 0x0000
        bRefresh = 0x0000
        bSynchAddress = 0x0000

     Endpoint 6
        bLength = 0x0007
        bDescriptorType = 0x0005
        bEndpointAddress = 0x0006  <OUT>
        bmAttributes = 0x0002  <BULK>
        wMaxPacketSize = 0x0200
        bInterval = 0x0000
        bRefresh = 0x0000
        bSynchAddress = 0x0000


Many thanks !