Messages

yes,  enable in the page /ui/quagga/bgp/index

Try it with

Code Select Expand

ping6 2a0d:2408:512:a::2

ok, this command ping6 work. Thanks.   ;)

i can't see frr run.


https://i.imgur.com/5ZbUzBN.jpg

https://i.imgur.com/YukP9ip.jpg

it is can't upgrade from 21.1 to 21.1.1
https://quantum-mirror.hu/mirrors/pub/opnsense

Code Select Expand


***GOT REQUEST TO UPGRADE: all***
Updating OPNsense repository catalogue...
OPNsense repository is up to date.
All repositories are up to date.
Updating OPNsense repository catalogue...
OPNsense repository is up to date.
All repositories are up to date.
Checking for upgrades (88 candidates): .......... done
Processing candidates (88 candidates): . done
Checking integrity... done (0 conflicting)
Your packages are up to date.
Checking integrity... done (0 conflicting)
Nothing to do.
Checking all packages: .......... done
Nothing to do.
Starting web GUI...done.
Generating RRD graphs...done.
Fetching base-21.1.1-amd64.txz:
... failed, signature invalid
***DONE***





Code Select Expand

ping 2a0d:2408:512:a::2
ping: cannot resolve 2a0d:2406:512:a::2: Unknown server error

pull-filter ignore peer-id
ifconfig-ipv6 2a0d:2408:512:a::3/124 2a0d:2408:512:a::2
reneg-sec 86400
persist-key
persist-tun
link-mtu 1500
ifconfig 10.16.0.2 10.16.0.1
auth-nocache
ping-timer-rem
remote-cert-tls server
tls-version-min 1.3
sndbuf 0
rcvbuf 0
tls-crypt /etc/openvpn/ta.key

now ipv4 can ping, but ipv6 can't ping and route.

i creat ta.key file put in etc and config it advanced settings, uncheck default tls option. vpn can up.

but i can't ping and route connect tunnel inside ipv4 and ipv6 remote ip.

VPN still can't normal work.

Code Select Expand


ifconfig 10.16.0.2 10.16.0.1
ifconfig-ipv6 2a0d:2408:512:a::3/124 2a0d:2408:512:a::2


my openvpn 2.5 using tls-crypt ta.key, pfsense has this option, but opnsense has no this.
now i using opnsense can't connect to remote openvpn when no tls-crypt.

so please add tls-crypt support.

opnsensecn.aivian.org:51443
网站打不开

建议你还是用付费那种非公共的.  如果需要可以联系

i am full new isntall OPNsense-20.7-OpenSSL-vga-amd64, but when i click https://192.168.1.1/ui/core/firmware#updates, then system dead and reboot.    :'(

please give newest version 20.7.2 install file for try.

我wan口 使用跟踪接口为了ipv6, 然后用wireguard做vpn, 我如果将VPN内部ipv6地址转换为wan或LAN ipv6网段并且能转发流量上网?

Are you running Sensei?

whats Sensei?  it is new install system. no running other.

The system keeps restarting automatically and cannot work at all

20.7-r1 version has bugs, when i check update and upgrade, then system down and auto reboot. it is can't normal work.

i am new user and from twitter. i have try install new version, but i have setup LAN network and WAN ppoe  after, the lan network and lan address can't visit internet, wan show is up online.

i think should Outbound  auto creat full rule.  only have :

Code Select Expand






接口

源网络

源端口

目标

目标端口

NAT地址

NAT端口

静态端口

描述


    LAN 127.0.0.0/8 * * 500 LAN * 是 自动生成的ISAKMP规则
    LAN 127.0.0.0/8 * * * LAN * 否 自动生成的规则
    WAN 127.0.0.0/8 * * 500 WAN * 是 自动生成的ISAKMP规则
    WAN 127.0.0.0/8 * * * WAN * 否 自动生成的规则
    WAN2 127.0.0.0/8 * * 500 WAN2 * 是 自动生成的ISAKMP规则
    WAN2 127.0.0.0/8 * * * WAN2 * 否 自动生成的规则