Messages

Any hardware recommendations for 10G upgrade?

Currently have a qotom i7 been using for the past 2 years, absolutely love that thing.  Excellent performance.

Looking to explore options with 10G NIC.

Wish list:

Decent or lower power consumption
rack mount, 1U ideal but got plenty of space
Front face IO
Mix of 10G and 1G Intel Nics

TIA

not sure what qotom cpu he is using but i have the i7-7500u in my box
i also have a hp t730 which is also real good value for the money.

   Intel(R) Core(TM) i7-7500U CPU @ 2.70GHz (4 cores)

8gb should be fine but i got 16gb to future proof.

CPU is usually hover up down around 20 percent.

I run Qotom i7 / 16gb memory / 12gb SSD / run IDS/IPS / Sensei / Geo Block/ VLAN / -- been running this now for about 2 years with any hiccups...Constantly get anywhere between 800-900 speeds on 1g line.

Run business out of my house with 4 employees and we stream everything.

boot usb stick and install

I've run a Qotom i7 box for the past 2 years with factory paste no issues at all.

I also get the 400 error...I keep reloading and eventually it shows the login page.

I have a similiar scenario and wanted to ask this.

I have a port forward setup to my DVR.  I want to block all countries except the US.  I set up the alias and appropriate firewall rule.

In my firewall rule, do i put the destination with my local lan dvr address?

How do i verify that this is being done/blocked?

SOLVED -- I had to set a default gateway firewall rule to the DVR, after that it allowed me to see my dvr from the app.

I have DVR in which I have setup port forwarding.  The DVR also has a remote app that works great as well.
All the rules have been setup in WAN.

The issue that I am having is that I am able to view the camera's via the app outside the network however inside the network I am not able to do so.  The DVR is accessible via web page inside the network as well as VPN.  Under firewall advanced, reflection for port forwards, reflection 1:1, and automatic outbound NAT is checked.

The app itself does use a different port to view and that is also setup properly.

I am just baffled on why I can't view the cameras on my app inside the network.

ok, DHCP range was set by default (I believe) to xxx.xxx.xx.10 to 254, this was a fresh install..

I tried assigning static IP however the plus icon did not show up.

When I changed DHCP range from 100 to 254, it showed up?

Thought my DHCP was the entire subnet but it wasn't.  I changed the subnet ranges a bit from 100 to 254 and now I am able to assign static IP in LAN with the "+"....

Seems like a bug?

I did a fresh install of open and wanted to assign static IP address for lan. 

Under services, dhcpv4, leases, I see the entire list however there is no plus sign there to assign a static.  This is how I usually did it before.

I tried rebooting the firewall and stop and starting the services, but that didn't work.

I have that latest production firmware.

Any ideas?

Is there a way to email or notify if a new lan ip was given out and added to the network?  I believe I saw somewhere to deny new lan DHCP requests, but dont want to do that just yet.

Any third party/free/open source solutions out there to monitor the network?

I have had my port forwarding setup for awhile, everything was working smoothly.

Now it has stopped and can't figure out why.

Here are some screen shots.

I see the follow after I updated to 19.1.  Any issues with this?

***GOT REQUEST TO AUDIT SECURITY***
Fetching vuln.xml.bz2: .......... done
py27-requests-2.18.4_1 is vulnerable:
www/py-requests -- Information disclosure vulnerability
WWW: https://vuxml.freebsd.org/freebsd/50ad9a9a-1e28-11e9-98d7-0050562a4d7b.html

1 problem(s) in the installed packages found.
***DONE***

no worries, that worked!!

ty Franco