Topics

My system crashed after 25.7 upgrade..

any ideas what this error message is?

Can Zenarmor exist on the secondary instance in HA?

I have a Qotom i7 that I've been running Opnsense on which consistently stayed about 50-55 prior with 21.7.  Now  its between 63-70 Celsius.

No errors, or anything out of the ordinary that I can tell so far.

When 22.1 is released, is it safe to upgrade with Zenarmor?

I upgrade to the latest opnsense update and saw this morning that the sensei service stopped with hi swap usage.

Any ideas? My system has been working fine for a long time w/ sensei.

Screen shot attached.

I am trying to update one my clients to latest build but its been stuck on fetching 21.7.1 for awhile.  Stuck may not be the actual correct word, the "." indicator is ticking right along...its prob been about 15-20 minutes.  No issues with ISP or network.

Hello, any issues with upgrading to 21.7 with sensei?

Any hardware recommendations for 10G upgrade?

Currently have a qotom i7 been using for the past 2 years, absolutely love that thing.  Excellent performance.

Looking to explore options with 10G NIC.

Wish list:

Decent or lower power consumption
rack mount, 1U ideal but got plenty of space
Front face IO
Mix of 10G and 1G Intel Nics

TIA

I have DVR in which I have setup port forwarding.  The DVR also has a remote app that works great as well.
All the rules have been setup in WAN.

The issue that I am having is that I am able to view the camera's via the app outside the network however inside the network I am not able to do so.  The DVR is accessible via web page inside the network as well as VPN.  Under firewall advanced, reflection for port forwards, reflection 1:1, and automatic outbound NAT is checked.

The app itself does use a different port to view and that is also setup properly.

I am just baffled on why I can't view the cameras on my app inside the network.

I did a fresh install of open and wanted to assign static IP address for lan. 

Under services, dhcpv4, leases, I see the entire list however there is no plus sign there to assign a static.  This is how I usually did it before.

I tried rebooting the firewall and stop and starting the services, but that didn't work.

I have that latest production firmware.

Any ideas?

Is there a way to email or notify if a new lan ip was given out and added to the network?  I believe I saw somewhere to deny new lan DHCP requests, but dont want to do that just yet.

Any third party/free/open source solutions out there to monitor the network?

I have had my port forwarding setup for awhile, everything was working smoothly.

Now it has stopped and can't figure out why.

Here are some screen shots.

I see the follow after I updated to 19.1.  Any issues with this?

***GOT REQUEST TO AUDIT SECURITY***
Fetching vuln.xml.bz2: .......... done
py27-requests-2.18.4_1 is vulnerable:
www/py-requests -- Information disclosure vulnerability
WWW: https://vuxml.freebsd.org/freebsd/50ad9a9a-1e28-11e9-98d7-0050562a4d7b.html

1 problem(s) in the installed packages found.
***DONE***

I changed my updates to developmental to download Wireguard and added the Wireguard plug in.

Recently a update showed up so I updated and server rebooted with no issues.

I checked for update and it said a update was available per the attached screen.

I hit unlock and then upgrade and received this error:

***GOT REQUEST TO UPGRADE: maj***
Fetching packages-19.1.r1-OpenSSL-amd64.tar: .. failed, no signature found
***DONE***

I did a fresh install on a new i5 16gb 128gb mini Co, yes l know of er kill, but the web GUI takes about 20-30 seconds to load.  Once loads it's fine however even on refresh of the page takes a 20 seconds or so.

So far everything else seems to be fine.

My other installs the GUI loads pretty quickly.

Sorry if this is older topic and or already covered.

Does the issue with assigning a VIRTIO driver for a Opnsense in a Proxmox VM and using IDS/IPS still an issue?  Only way to get IPS to work is using E1000 driver?

Any work arounds or further update?

Thank you.

I installed opnsense on a Proxmox vm and I think I got everything set up with way I am looking to do.

I have a DVR system as well as home automation system that I have setup up port forwards for.  They both can be accessed outside of my network perfectly fine however when I am inside my network I am unable to view them via my mobile phone.  I can't figure out whats wrong and have gone through my setup several times.

Here are some screen shots if it helps.

Hello,

I am trying to setup a WAN failover.

I tried to test the connection and unplugged my WAN ethernet cable and it still showed the interface up even after several minutes of it being plugged in.  It also did tried going to shell and ping the WAN IP address and it actually returned back pingable which was strange.  It never switched over to my wan 2 which I had tested earlier via direction connection to pc and it worked.  Any ideas?

Attached are some screen shots.

I currently have opnsense installed a VM with Proxmox....

This is more of a proxmox question but I figure I can ask.

I set a static IP address within the opnsense lan configuration for Proxmox however I am unable to get to the Proxmox host via my lan network.  The Proxmox console does show the current IP address on console login.

I was advised that it needs to be reset at the Proxmox console level via command line but I am unfamiliar how to do.

Any guide on how to do this is appreciated.

Hello newbie here.  Switching my setup from untangle over to opnlsense.

Wanted to see if there's anything in the pipeline for reporting of networking activity via the GUI or via email

It nice to receive an email of the prior days activity or see it in s GUI format.

Things like total bandwidth, top client, top sites etc