"Recent posts
#1
Documentation and Translation / Re: Translation
Last post by MartinScorp - Today at 02:57:23 PMQuote from: franco on October 02, 2015, 07:10:52 AMInvites for https://translate.opnsense.org will go out later today. :)
Been there , made an account , but now ..how to ad the Dutch language topic and begin translating?
Would love to help translate to Dutch
#2
Hardware and Performance / Re: Strange DNS spikes and ran...
Last post by nero355 - Today at 02:56:28 PMQuote from: matsoon on Today at 08:52:16 AMlook deeper for adware on the client first?Killing the source is always the best !!
Good luck! :)
#3
General Discussion / Re: Are my dhcp starting and e...
Last post by nero355 - Today at 02:52:56 PMYour DHCP range is configured in the two input fields.
192.168.1.0/24 is the whole range.
192.168.1.1 to 192.168.1.254 are the useable IP addresses.
You can do whatever you want inside that range.
So your current setup is correct :)
192.168.1.0/24 is the whole range.
192.168.1.1 to 192.168.1.254 are the useable IP addresses.
You can do whatever you want inside that range.
So your current setup is correct :)
#4
Q-Feeds (Threat intelligence) / Re: Looking for testers Q-Feed...
Last post by sammy - Today at 02:46:42 PMI'm still seeing after the upgrade
{
"status": "OK",
"action": "Pass"
}
{
"status": "OK",
"action": "Pass"
}
#5
Dutch - Nederlands / Re: Nederlandse Vertaling
Last post by MartinScorp - Today at 02:32:42 PMthanks
#6
General Discussion / Re: An error has occured "Sorr...
Last post by Monviech (Cedrik) - Today at 02:11:57 PMUse a VPN that offers IPv6, the forum has that and the IP address is more unique than with IPv4.
#7
26.1 Series / WireGuard VPN Resolve Hostname
Last post by Glossy2k - Today at 01:49:28 PMHello everyone! I am a little bit stuck and need some assistance (I am quite new to OPNSense)
Currently, we are hosting some customer servers in our data center and are looking to use WireGuard VPN to resolve hostnames. I understand the differences between Dnsmasq and Unbound DNS, but how would I go about doing this? I must be able to resolve a hostname itself, without a domain such as "CUSTSERVER" instead of "CUSTSERVER.internal".
I hope this makes sense and someone can help!
Currently, we are hosting some customer servers in our data center and are looking to use WireGuard VPN to resolve hostnames. I understand the differences between Dnsmasq and Unbound DNS, but how would I go about doing this? I must be able to resolve a hostname itself, without a domain such as "CUSTSERVER" instead of "CUSTSERVER.internal".
I hope this makes sense and someone can help!
#8
General Discussion / Re: An error has occured "Sorr...
Last post by RobertoZ - Today at 01:34:10 PMSame issue here. Using VPN gets you banned from the forum.
#9
26.1 Series / Re: dnsmasq - expiration optio...
Last post by Monviech (Cedrik) - Today at 01:26:01 PMWe just collect all options that are valid via IANA and don't filter much. We don't know if somebody uses the option you have issues with successfully.
https://github.com/opnsense/core/blob/master/src/opnsense/scripts/dnsmasq/dnsmasq_dhcp_options.py#L36
The options directly supported by Dnsmasq will appear under "common" (means dnsmasq itself advertises these as being supported)
https://github.com/opnsense/core/blob/5b3b163ce0d93d41fcb141807c6d76389178ad1b/src/opnsense/scripts/dnsmasq/dnsmasq_dhcp_options.py#L78-L79
https://github.com/opnsense/core/blob/master/src/opnsense/scripts/dnsmasq/dnsmasq_dhcp_options.py#L36
The options directly supported by Dnsmasq will appear under "common" (means dnsmasq itself advertises these as being supported)
https://github.com/opnsense/core/blob/5b3b163ce0d93d41fcb141807c6d76389178ad1b/src/opnsense/scripts/dnsmasq/dnsmasq_dhcp_options.py#L78-L79
#10
26.1 Series / Re: IPv6 downstream router (Fr...
Last post by Monviech (Cedrik) - Today at 01:14:59 PMHello Gerhard,
this is what I expected.
Also that no route was installed initially. We guard the prefix watcher if no lease.csv files exist, so the watcher exited early. Restarting KEA started it after the lease file was there again.
Thanks for confirming, let's hope its stable now. :)
this is what I expected.
Also that no route was installed initially. We guard the prefix watcher if no lease.csv files exist, so the watcher exited early. Restarting KEA started it after the lease file was there again.
Thanks for confirming, let's hope its stable now. :)
