Author Topic: [Solved] Authentication Failed to access OPNSense (Read 9045 times)

adish77 · « **on:** September 13, 2018, 10:21:47 am »

Hello Guys,

Need some help from you please.

I created an LDAP server, but was not operational.

I tried to view the status of LDAP server by validating the LDAP Server to test.

System>>Access>>Settings

I changed the authentication server and backup authentication to the LDAP server instead of local.

Now i have an issue where i can't access the OPNSense anymore since the LDAP is not working.

Can you please advise how to remove this settings from console [Single User Mode] in order to authenticate through local again.

Thanks in advance.

Kingrat · « **Reply #1 on:** September 13, 2018, 02:14:29 pm »

Easiest would be to go to go to menu option 13) Restore from a backup and select a config from before you made the change.

marjohn56 · « **Reply #2 on:** September 16, 2018, 05:48:22 pm »

Got to this thread, full instructions are there on how to recover when you cannot gain access via console/gui and need to restore the config.

https://forum.opnsense.org/index.php?topic=9172.msg41178#msg41178

adish77 · « **Reply #3 on:** September 18, 2018, 09:37:04 am »

Hello Guys,

Thanks for the reply above.

Link proposed allowed to change the authentication back to local.

Thanks for your help.

Author Topic: [Solved] Authentication Failed to access OPNSense (Read 9045 times)

adish77

[Solved] Authentication Failed to access OPNSense

Kingrat

Re: Authentication Failed to access OPNSense

marjohn56

Re: Authentication Failed to access OPNSense

adish77

Re: Authentication Failed to access OPNSense