Booting... KDB: debugger backends: ddb KDB: current backend: ddb Copyright (c) 1992-2017 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 11.1-RELEASE-p9 e86703e30(stable/18.1) amd64 FreeBSD clang version 4.0.0 (tags/RELEASE_400/final 297347) (based on LLVM 4.0.)VT(vga): resolution 640x480 [HBSD LOG] logging to system: enabled [HBSD LOG] logging to user: disabled [HBSD HARDENING] procfs hardening: enabled [HBSD ASLR] status: opt-out [HBSD ASLR] mmap: 30 bit [HBSD ASLR] exec base: 30 bit [HBSD ASLR] stack: 42 bit [HBSD ASLR] vdso: 28 bit [HBSD ASLR] map32bit: 18 bit [HBSD ASLR] disallow MAP_32BIT mode mmap: opt-in [HBSD ASLR (compat)] status: opt-out [HBSD ASLR (compat)] mmap: 14 bit [HBSD ASLR (compat)] exec base: 14 bit [HBSD ASLR (compat)] stack: 14 bit [HBSD ASLR (compat)] vdso: 8 bit [HBSD SEGVGUARD] status: opt-out [HBSD SEGVGUARD] expiry: 120 sec [HBSD SEGVGUARD] suspension: 600 sec [HBSD SEGVGUARD] maxcrashes: 5 CPU: Intel(R) Atom(TM) CPU C3558 @ 2.20GHz (2200.07-MHz K8-class CPU) Origin="GenuineIntel" Id=0x506f1 Family=0x6 Model=0x5f Stepping=1 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,> Features2=0x4ff8ebbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,> AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> AMD Features2=0x101<LAHF,Prefetch> Structured Extended Features=0x2294e283<FSGSBASE,TSCADJ,SMEP,ERMS,NFPUSG,MPX,> Structured Extended Features3=0x2c000000<IBPB,STIBP,ARCH_CAP> XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> IA32_ARCH_CAPS=0x1<RDCL_NO> VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr TSC: P-state invariant, performance statistics real memory = 8589934592 (8192 MB) avail memory = 8187076608 (7807 MB) Event timer "LAPIC" quality 600 ACPI APIC Table: <INTEL TIANO > WARNING: L1 data cache covers less APIC IDs than a core 0 < 1 FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs FreeBSD/SMP: 1 package(s) x 4 core(s) random: unblocking device. ioapic0 <Version 2.0> irqs 0-23 on motherboard SMP: AP CPU #1 Launched! SMP: AP CPU #2 Launched! SMP: AP CPU #3 Launched! Timecounter "TSC-low" frequency 1100035729 Hz quality 1000 random: entropy device external interface wlan: mac acl policy registered netmap: loaded module module_register_init: MOD_LOAD (vesa, 0xffffffff810ab110, 0) error 19 random: registering fast source Intel Secure Key RNG random: fast provider: "Intel Secure Key RNG" kbd1 at kbdmux0 nexus0 vtvga0: <VT VGA driver> on motherboard cryptosoft0: <software crypto> on motherboard acpi0: <ALASKA A M I > on motherboard acpi0: Power Button (fixed) cpu0: <ACPI CPU> on acpi0 cpu1: <ACPI CPU> on acpi0 cpu2: <ACPI CPU> on acpi0 cpu3: <ACPI CPU> on acpi0 hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 24000000 Hz quality 950 Event timer "HPET" frequency 24000000 Hz quality 550 Event timer "HPET1" frequency 24000000 Hz quality 440 Event timer "HPET2" frequency 24000000 Hz quality 440 Event timer "HPET3" frequency 24000000 Hz quality 440 Event timer "HPET4" frequency 24000000 Hz quality 440 atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 atrtc0: Warning: Couldn't map I/O. Event timer "RTC" frequency 32768 Hz quality 0 attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pcib0: _OSC returned error 0x10 pci0: <ACPI PCI bus> on pcib0 pcib1: <ACPI PCI-PCI bridge> at device 6.0 on pci0 pci1: <ACPI PCI bus> on pcib1 pci1: <processor> at device 0.0 (no driver attached) pcib2: <ACPI PCI-PCI bridge> mem 0xdff60000-0xdff7ffff irq 20 at device 14.0 on0pci2: <ACPI PCI bus> on pcib2 pcib3: <ACPI PCI-PCI bridge> mem 0xdff40000-0xdff5ffff irq 21 at device 15.0 on0pci3: <ACPI PCI bus> on pcib3 igb0: <Intel(R) PRO/1000 Network Connection, Version - 2.5.3-k> port 0xd000-0xd3igb0: Using MSIX interrupts with 5 vectors igb0: Ethernet address: 00:90:00:00:00:01 igb0: Bound queue 0 to cpu 0 igb0: Bound queue 1 to cpu 1 igb0: Bound queue 2 to cpu 2 igb0: Bound queue 3 to cpu 3 igb0: netmap queues/slots: TX 4/1024, RX 4/1024 pcib4: <ACPI PCI-PCI bridge> mem 0xdff20000-0xdff3ffff irq 22 at device 16.0 on0pci4: <ACPI PCI bus> on pcib4 igb1: <Intel(R) PRO/1000 Network Connection, Version - 2.5.3-k> port 0xc000-0xc4igb1: Using MSIX interrupts with 5 vectors igb1: Ethernet address: 00:90:00:00:00:02 igb1: Bound queue 0 to cpu 0 igb1: Bound queue 1 to cpu 1 igb1: Bound queue 2 to cpu 2 igb1: Bound queue 3 to cpu 3 igb1: netmap queues/slots: TX 4/1024, RX 4/1024 pcib5: <ACPI PCI-PCI bridge> mem 0xdff00000-0xdff1ffff irq 23 at device 17.0 on0pci5: <ACPI PCI bus> on pcib5 ahci0: <AHCI SATA controller> port 0xe0c0-0xe0c7,0xe0b0-0xe0b3,0xe040-0xe05f me0ahci0: AHCI v1.31 with 1 6Gbps ports, Port Multiplier supported ahcich0: <AHCI channel> at channel 0 on ahci0 ahciem0: <AHCI enclosure management bridge> on ahci0 ahci1: <AHCI SATA controller> port 0xe0a0-0xe0a7,0xe090-0xe093,0xe020-0xe03f me0ahci1: AHCI v1.31 with 1 6Gbps ports, Port Multiplier supported ahcich8: <AHCI channel> at channel 7 on ahci1 ahciem1: <AHCI enclosure management bridge> on ahci1 xhci0: <XHCI (generic) USB 3.0 controller> mem 0xdff80000-0xdff8ffff irq 19 at 0xhci0: 32 bytes context size, 64-bit DMA usbus0 on xhci0 usbus0: 5.0Gbps Super Speed USB v3.0 pcib6: <ACPI PCI-PCI bridge> irq 16 at device 22.0 on pci0 pci6: <ACPI PCI bus> on pcib6 pci6: <network, ethernet> at device 0.0 (no driver attached) pci6: <network, ethernet> at device 0.1 (no driver attached) pcib7: <ACPI PCI-PCI bridge> at device 23.0 on pci0 pci7: <ACPI PCI bus> on pcib7 pci7: <network, ethernet> at device 0.0 (no driver attached) pci7: <network, ethernet> at device 0.1 (no driver attached) pci0: <simple comms> at device 24.0 (no driver attached) pci0: <simple comms, UART> at device 26.0 (no driver attached) pci0: <simple comms, UART> at device 26.1 (no driver attached) pci0: <simple comms, UART> at device 26.2 (no driver attached) isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 pci0: <memory> at device 31.2 (no driver attached) pci0: <serial bus> at device 31.5 (no driver attached) acpi_tz0: <Thermal Zone> on acpi0 uart0: <16550 or compatible> port 0x3f8-0x3ff irq 7 flags 0x10 on acpi0 uart0: console (115200,n,8,1) uart1: <16550 or compatible> port 0x2f8-0x2ff irq 10 on acpi0 ppc0: cannot reserve I/O port range est0: <Enhanced SpeedStep Frequency Control> on cpu0 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 21eb00001600 device_attach: est0 attach returned 6 est1: <Enhanced SpeedStep Frequency Control> on cpu1 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 21eb00001600 device_attach: est1 attach returned 6 est2: <Enhanced SpeedStep Frequency Control> on cpu2 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 21eb00001600 device_attach: est2 attach returned 6 est3: <Enhanced SpeedStep Frequency Control> on cpu3 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 21eb00001600 device_attach: est3 attach returned 6 Timecounters tick every 1.000 msec nvme cam probe device init ugen0.1: <0x8086 XHCI root HUB> at usbus0 uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 uhub0: 8 ports with 8 removable, self powered ugen0.2: <UFD 3.0 Silicon-Power16G> at usbus0 umass0 on uhub0 umass0: <UFD 3.0 Silicon-Power16G, class 0/0, rev 3.00/11.00, addr 1> on usbus0 umass0: SCSI over Bulk-Only; quirks = 0x4000 umass0:4:0: Attached to scbus4 ahcich8: Timeout on slot 5 port 0 ahcich8: is 00000002 cs 00000000 ss 00000000 rs 00000020 tfd 50 serr 00000000 c7(aprobe0:ahcich8:0:0:0): ATA_IDENTIFY. ACB: ec 00 00 00 00 40 00 00 00 00 00 00 (aprobe0:ahcich8:0:0:0): CAM status: Command timeout (aprobe0:ahcich8:0:0:0): Retrying command run_interrupt_driven_hooks: still waiting after 60 seconds for xpt_config ahcich8: Timeout on slot 6 port 0 ahcich8: is 00000002 cs 00000000 ss 00000000 rs 00000040 tfd 50 serr 00000000 c7(aprobe0:ahcich8:0:0:0): ATA_IDENTIFY. ACB: ec 00 00 00 00 40 00 00 00 00 00 00 (aprobe0:ahcich8:0:0:0): CAM status: Command timeout (aprobe0:ahcich8:0:0:0): Error 5, Retries exhausted ahcich8: Timeout on slot 11 port 0 ahcich8: is 00000002 cs 00000000 ss 00000000 rs 00000800 tfd 50 serr 00000000 c7(aprobe0:ahcich8:0:0:0): ATA_IDENTIFY. ACB: ec 00 00 00 00 40 00 00 00 00 00 00 (aprobe0:ahcich8:0:0:0): CAM status: Command timeout (aprobe0:ahcich8:0:0:0): Retrying command run_interrupt_driven_hooks: still waiting after 120 seconds for xpt_config ahcich8: Timeout on slot 12 port 0 ahcich8: is 00000002 cs 00000000 ss 00000000 rs 00001000 tfd 50 serr 00000000 c7(aprobe0:ahcich8:0:0:0): ATA_IDENTIFY. ACB: ec 00 00 00 00 40 00 00 00 00 00 00 (aprobe0:ahcich8:0:0:0): CAM status: Command timeout (aprobe0:ahcich8:0:0:0): Error 5, Retries exhausted ses0 at ahciem0 bus 0 scbus1 target 0 lun 0 ses0: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device ses0: SEMB SES Device ses1 at ahciem1 bus 0 scbus3 target 0 lun 0 ses1: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device ses1: SEMB SES Device da0 at umass-sim0 bus 0 scbus4 target 0 lun 0 da0: <UFD 3.0 Silicon-Power16G 1100> Removable Direct Access SPC-4 SCSI device da0: Serial Number P1503809737151200347 da0: 400.000MB/s transfers da0: 15376MB (31490048 512 byte sectors) da0: quirks=0x2<NO_6_BYTE> Trying to mount root from ufs:/dev/ufs/OPNsense_Install [ro,noatime]... Mounting filesysahcich8: Timeout on slot 16 port 0 ahcich8: is 00000002 cs 00000000 ss 00000000 rs 00010000 tfd 50 serr 00000000 c7(aprobe0:ahcich8:0:0:0): ATA_IDENTIFY. ACB: ec 00 00 00 00 40 00 00 00 00 00 00 (aprobe0:ahcich8:0:0:0): CAM status: Command timeout (aprobe0:ahcich8:0:0:0): Error 5, Retries exhausted
Trying to mount root from ufs:/dev/ufs/OPNsense_Install [ro,noatime]... Mounting filesysahcich0: Timeout on slot 16 port 0 ahcich0: is 00000002 cs 00000000 ss 00000000 rs 00010000 tfd 50 serr 00000000 c7(aprobe0:ahcich0:0:0:0): ATA_IDENTIFY. ACB: ec 00 00 00 00 40 00 00 00 00 00 00 (aprobe0:ahcich0:0:0:0): CAM status: Command timeout (aprobe0:ahcich0:0:0:0): Error 5, Retries exhausted
ahcich8: <AHCI channel> at channel 7 on ahci1 ahciem1: <AHCI enclosure management bridge> on ahci1 xhci0: <Intel Denverton USB 3.0 controller> mem 0xdff80000-0xdff8ffff irq 19 at device 21.0 on pci0 xhci0: 32 bytes context size, 64-bit DMA
umass0:4:0: Attached to scbus4 ahcich8: Timeout on slot 5 port 0 ahcich8: is 00000002 cs 00000000 ss 00000000 rs 00000020 tfd 50 serr 00000000 c7(aprobe0:ahcich8:0:0:0): ATA_IDENTIFY. ACB: ec 00 00 00 00 40 00 00 00 00 00 00 (aprobe0:ahcich8:0:0:0): CAM status: Command timeout (aprobe0:ahcich8:0:0:0): Retrying command run_interrupt_driven_hooks: still waiting after 60 seconds for xpt_config
