Performance issues.

Started by guest17399, March 14, 2018, 10:31:43 PM

Previous topic - Next topic
There will be two cars in the cluster. If I'm not mistaken, then the cluster can be made with the means of opensense - that is, reservation, in case one machine fails.

In total there will be 2 completely identical machines.

The configuration of one of the machines:
HP DL360 G6
Xeon x5690 x2
I350-T4
4 + 4Gb RAM
72Gb HDD SAS (DG072A8B54) - HW Raid 1
2 PSU

What will happen:

Opensense Latest
Reservation machine.
100MBps traffic to the world.
1GBps traffic on the local network.
Suricata + signatures from Snort.
BGP Community.
NAT.

What can you expect from such a machine?
How feasible are the tasks?
Will there be problems with the disk subsystem?

Should not bei an issue. Perhaps a decrease of Suricata, but the rest is fine
WWW: www.routerperformance.net
Support plans: https://www.max-it.de/en/it-services/opnsense/
Commercial Plugins (German): https://opnsense.max-it.de/

I'm mostly afraid only that there may not be enough disk subsystem performance. And the HDD (SAS) needs SSD.

Without Proxy you dont need much disk speed
WWW: www.routerperformance.net
Support plans: https://www.max-it.de/en/it-services/opnsense/
Commercial Plugins (German): https://opnsense.max-it.de/

And how voluminous logs write?
When attacking, for example.

I'm afraid that the disk space may not be enough

72GB? Most files are clog's .. so they have a fixed size and older entries are deleted.
WWW: www.routerperformance.net
Support plans: https://www.max-it.de/en/it-services/opnsense/
Commercial Plugins (German): https://opnsense.max-it.de/


You should be fine with the disk. I run 2 OPNsense boxes with 60GB SSD's and stay under 10% on disk usage. Just don't use the swapfile option during install. Be careful using too many snort rules in IDS as they can eat memory.