Firewall->Diagnostics->pfTables is empty

Started by gonzo, February 13, 2018, 08:46:11 PM

Previous topic - Next topic
Print
Go Down Pages1 2
User actions
February 13, 2018, 08:46:11 PM
Hi

I created the alias type: URL Table (IPs), host (s): http://ip.jchost03.pl/ip_zablokowane_ataki.txt , and I added the rule to Firewall, but when I check pf Tables, is empty.

What is the reason that the table is empty ?

gonzo
February 13, 2018, 08:58:35 PM #1
Can you screenshot the settings for the alias?
February 13, 2018, 09:35:08 PM #2

I am including the view of aliases and rules
February 13, 2018, 09:41:26 PM #3
You have the same alias url twice. Maybe deleting the one you don't use helps?
OPNsense v18 | HW: Gigabyte Z370N-WIFI, i3-8100, 8GB RAM, 60GB SSD, | Controllers: 82575GB-quad, 82574, I221, I219-V | PPPoE: RDS Romania | Down: 980Mbit/s | Up: 500Mbit/s

Team Rebellion Member
February 13, 2018, 09:48:23 PM #4
did not help
February 13, 2018, 10:08:11 PM #5
If you run this command from the shell, will it populate the pf table?

# configctl filter refresh_aliases
OPNsense v18 | HW: Gigabyte Z370N-WIFI, i3-8100, 8GB RAM, 60GB SSD, | Controllers: 82575GB-quad, 82574, I221, I219-V | PPPoE: RDS Romania | Down: 980Mbit/s | Up: 500Mbit/s

Team Rebellion Member
February 13, 2018, 10:26:10 PM #6
Change the name of the list to something other than the same name of the URL you're using.  Just name it test1 or test2 or something just as a test.
February 13, 2018, 10:27:03 PM #7
no, still empty
February 13, 2018, 10:34:12 PM #8

still empty II
February 13, 2018, 10:42:04 PM #9
Firehol is populated? Any other lists are working?
Btw, i think Firehol L1 contains spamhaus. You could verify and delete it if confirmed.
OPNsense v18 | HW: Gigabyte Z370N-WIFI, i3-8100, 8GB RAM, 60GB SSD, | Controllers: 82575GB-quad, 82574, I221, I219-V | PPPoE: RDS Romania | Down: 980Mbit/s | Up: 500Mbit/s

Team Rebellion Member
February 13, 2018, 10:47:15 PM #10

Yes, FireHOL is OK, drop, edrop deleted
February 13, 2018, 10:50:29 PM #11
If you configure Firewall Maximum Table Entries @ Firewall: Settings: Advanced to say.. 500000, will your other list  work? After increasing the table entry, pls run "configctl filter refresh_aliases" again.
OPNsense v18 | HW: Gigabyte Z370N-WIFI, i3-8100, 8GB RAM, 60GB SSD, | Controllers: 82575GB-quad, 82574, I221, I219-V | PPPoE: RDS Romania | Down: 980Mbit/s | Up: 500Mbit/s

Team Rebellion Member
February 13, 2018, 10:56:14 PM #12

I set the value of this variable to 999999 at the very beginning of the configuration.
February 13, 2018, 11:06:42 PM #13
Delete the alias and recreate.. make sure there are no white spaces. Will this work?
OPNsense v18 | HW: Gigabyte Z370N-WIFI, i3-8100, 8GB RAM, 60GB SSD, | Controllers: 82575GB-quad, 82574, I221, I219-V | PPPoE: RDS Romania | Down: 980Mbit/s | Up: 500Mbit/s

Team Rebellion Member
February 13, 2018, 11:18:52 PM #14

I delete Firewall: Rules: OPT1
I delete Firewall: Aliases
recreate alias and rules, and .... still empty

Print
Go Up Pages1 2
User actions