Home
Help
Search
Login
Register
OPNsense Forum
»
Archive
»
18.1 Legacy Series
»
[SOLVED] Transparent Filtering Bridge not working
« previous
next »
Print
Pages: [
1
]
Author
Topic: [SOLVED] Transparent Filtering Bridge not working (Read 4616 times)
tmp
Newbie
Posts: 9
Karma: 2
[SOLVED] Transparent Filtering Bridge not working
«
on:
February 08, 2018, 07:12:45 pm »
Dear opnsense-community,
I'm new to opnsense and need some help in setting up opnsense as a transparent firewall bridge for content filtering. I'm using opnsense 18.
I followed the instructions given in this Wiki-Entry:
https://docs.opnsense.org/manual/how-tos/transparent_bridge.html
.
But now i'm facing the same issues as the user amithad in this thread:https://forum.opnsense.org/index.php?topic=5162.0.
My setup:
Router with DHCP and NAT (192.168.1.x) ------> OPNsense -------> (192.168.1.x) Server.
I have 3 Nics and followed the tutorial step by step, despite of defining a management ip as stated in Step 4, because I don't need this due to a dedicated managment nic.
I added an any->any rule to EVERY interface but I still cannot pass traffic through the new bridge. Do I need to set a gateway for the bridge interface pointing to the router that is doing dhcp etc? I'm really stuck at this point and tried everything that has been stated in this forum to transparent firewall configs.
Is there anything that has changed from version 17.x to 18.x so that the tutorial fails?
Regards
tmp
«
Last Edit: February 12, 2018, 11:03:09 pm by franco
»
Logged
tmp
Newbie
Posts: 9
Karma: 2
Re: Transparent Filtering Bridge not working
«
Reply #1 on:
February 10, 2018, 10:16:53 am »
For the records:
I am unable to tell you what I configured wrong. After two restarts the device works as described in the tutorial.
Logged
franco
Administrator
Hero Member
Posts: 17210
Karma: 1566
Re: [SOLVED] Transparent Filtering Bridge not working
«
Reply #2 on:
February 12, 2018, 11:03:34 pm »
Hi tmp,
Thanks for checking back.
Cheers,
Franco
Logged
Print
Pages: [
1
]
« previous
next »
OPNsense Forum
»
Archive
»
18.1 Legacy Series
»
[SOLVED] Transparent Filtering Bridge not working