Home
Help
Search
Login
Register
OPNsense Forum
»
Archive
»
17.1 Legacy Series
»
[SOLVED] OPNsense +Nvidia Shield +PLEX oh my!
« previous
next »
Print
Pages: [
1
]
Author
Topic: [SOLVED] OPNsense +Nvidia Shield +PLEX oh my! (Read 12086 times)
Nnyan
Jr. Member
Posts: 91
Karma: 8
[SOLVED] OPNsense +Nvidia Shield +PLEX oh my!
«
on:
March 12, 2017, 04:40:27 am »
Anyone here have an Nvidia Shield that they have PLEX working on? I have PLEX server working on my PC (after entering a NAT Port forward) but when I put it up on Nvidia Shield it can't be found by anything on the network the outside world. I even enabled UPNP to no avail.
«
Last Edit: March 14, 2017, 09:02:16 pm by Nnyan
»
Logged
guest15389
Guest
Re: OPNsense +Nvidia Shield +PLEX oh my!
«
Reply #1 on:
March 12, 2017, 05:41:21 am »
If you log in locally to your plex server, via:
http://INTERNALIP:32400/web
are you seeing the server accessible via the Remote Connect?
It sounds like if you are not seeing it, there is something not working with your port forward on 32400.
Logged
Nnyan
Jr. Member
Posts: 91
Karma: 8
Re: OPNsense +Nvidia Shield +PLEX oh my!
«
Reply #2 on:
March 12, 2017, 06:15:31 pm »
I can connect to it on the local network but it's not available remotely. The port forward works just fine if I fire up the PLEX server running on my PC (that server is visible remotely) so I don't know why it would work for one device and not another (I have a flat network no vlans ATM).
Logged
guest15389
Guest
Re: OPNsense +Nvidia Shield +PLEX oh my!
«
Reply #3 on:
March 12, 2017, 06:44:35 pm »
I have a few things I do for local plex access.
1 - I make sure the port is showing up properly externally.
2 - I do a split DNS over for my plex server
3 - I do a plex.direct override and you can point this to anything really. I use 8.8.8.8
4 - My DHCP clients use my router as the DNS server.
My plex server is my case is called "plex" for a hostname as well (I know very unique).
Logged
Nnyan
Jr. Member
Posts: 91
Karma: 8
Re: OPNsense +Nvidia Shield +PLEX oh my!
«
Reply #4 on:
March 13, 2017, 06:27:07 am »
Thanks for the info I'll try this tomorrow as it's been a crazy day today and I have to spend some wife time. I'll post back. But step #1 is where I'm dying as my port looks good locally but not available to the internet (remote), and I'm not sure how to do #2.
I know with pfSense port forwarding needs a NAT and a Rule is that true with OPNsense too?
«
Last Edit: March 13, 2017, 07:30:29 am by Nnyan
»
Logged
guest15389
Guest
Re: OPNsense +Nvidia Shield +PLEX oh my!
«
Reply #5 on:
March 13, 2017, 04:56:39 pm »
Yes, it requires a rule and a NAT, but it should auto create the rule for you.
My screens look like:
NAT
Rule
The split DNS is underneath the Services->DNS Forwarder at the bottom. I gave you the screenshot of my setup so you can see it in the previous post.
Logged
Nnyan
Jr. Member
Posts: 91
Karma: 8
Re: OPNsense +Nvidia Shield +PLEX oh my!
«
Reply #6 on:
March 14, 2017, 06:30:41 am »
@Animosity022: I really do appreciate all your help, your screenshots were great! I replicated what you posted and I still get the same result. It goes green for a split second then it goes red. The only other area where I made some changes based on another post in the Plex forums was this:
https://ibb.co/mKWaiv
Logged
Nnyan
Jr. Member
Posts: 91
Karma: 8
Re: OPNsense +Nvidia Shield +PLEX oh my!
«
Reply #7 on:
March 14, 2017, 06:41:34 am »
Ok so someone on the Plex forums asked me to turn off Reflections for 1:1. I did that and after a few minutes bam! It's all green and up. I'll feel better once this is up and running just fine for a few days but wow I'm a happy camper!
I even got my Cujo in line with OPNsense and it's working just fine too! I think I'm going to hit the sack riding on a high!
Again thank you for all your help, without your clear instructions I would not have gotten this done.
Logged
Nnyan
Jr. Member
Posts: 91
Karma: 8
[SOLVED] Re: OPNsense +Nvidia Shield +PLEX oh my!
«
Reply #8 on:
March 14, 2017, 09:01:51 pm »
Still up and running and I was able to access the server remotely from work (which is typically the bane for remote access it's locked down tight) so I'm going to put this as solved. I'm going to put together some notes so I don't have to re-invent the wheel.
Logged
Nnyan
Jr. Member
Posts: 91
Karma: 8
Re: [SOLVED] OPNsense +Nvidia Shield +PLEX oh my!
«
Reply #9 on:
March 15, 2017, 02:09:30 am »
my Cujo started blocking all sorts of connection attempts to port 443 so I tested disabling that rule and the PLEX server did not drop (even after disabling remote access, rebooting everything, etc...).
Logged
mariousai
Newbie
Posts: 7
Karma: 1
Re: OPNsense +Nvidia Shield +PLEX oh my!
«
Reply #10 on:
August 15, 2017, 11:07:50 am »
Quote from: Nnyan on March 14, 2017, 06:41:34 am
Ok so someone on the Plex forums asked me to turn off Reflections for 1:1.
hi all! I have the same problem, could you explain how to "turn off Reflections for 1:1."
thanks in advance
Logged
mariousai
Newbie
Posts: 7
Karma: 1
Re: [SOLVED] OPNsense +Nvidia Shield +PLEX oh my!
«
Reply #11 on:
August 15, 2017, 11:51:46 am »
did it, but there is no way to solve.
I see the green for half a second and then red again.
Logged
Print
Pages: [
1
]
« previous
next »
OPNsense Forum
»
Archive
»
17.1 Legacy Series
»
[SOLVED] OPNsense +Nvidia Shield +PLEX oh my!