Advice needed: Mini PC for my first OPNsense firewall

Started by sam1970, November 16, 2026, 08:18:21 PM

Previous topic - Next topic
Quote from: tangofan on November 17, 2026, 10:34:39 AMI would recommend the Amibios though, not their coreboot BIOS.
It's improved a lot but coreboot hasn't been bug-free.  Definitely AMI for full features, coreboot if you value the HAP disable function (to neuter the Intel ME).
N5105 | 8/250GB | 4xi226-V | Community

November 17, 2026, 10:44:17 AM #16 Last Edit: November 18, 2026, 06:27:59 AM by tangofan
Quote from: sam1970 on November 16, 2026, 11:09:48 PMThanks for the advice. Let me clarify my network setup.

My NAS and main PC have a direct 2.5GbE connection. Both also connect to Switch 1 (managed Netgear, 1GbE).

Switch 2, near my ISP router, connects Sonos, WiFi, IoT devices, TVs, etc.

Currently, both switches are connected by a long Ethernet cable. I'd remove that connection and connect them directly to OPNsense:

- Port 1: WAN (ISP router)
- Port 2: Switch 1 (homelab)
- Port 3: Switch 2 (WiFi/IoT)
- Port 4: Spare

My goal is to isolate the homelab (VLAN 10) from WiFi/IoT (VLAN 20). Gigabit speeds are sufficient.

I'd prefer an established brand such as Protectli and an N305 CPU for future Suricata experiments.
In your setup you actually do not need more than two ports. My Protectli VP2420 has four, but two are empty. You just group the two VLANs for homelab and WiFi/IoT onto one physical port and - since you have managed switches - you can split those VLANs on one switch into various access ports (and connect that second switch, if you want to).

Talking about WiFi: I am using two Ruckus R650 wireless access points (bought cheaply on eBay) in a mesh network. The nice thing about them is that they can handle VLANs, so I have put different SSIDs on different VLANs to keep all nice and separated.

Despite the fact that I only use two ports on my VP2420, I am happy that I have four, because I have configured one of them as a rescue port. In my current configuration the LAN port carries all my VLANs to my core switch (MikroTik CRS310) and all my devices connect to the router over one of the various VLANs. So that rescue port is a way for me to get into OPNsense directly via a network port, if something should go wrong with all those VLANs and I need direct network access to the router.

@tangofan

Thanks for sharing your experience with Zenarmor, especially the performance impact and RAM usage. That's very useful information. Since my switches are limited to 1Gbps, the reduced throughput wouldn't necessarily be a problem, but the memory consumption is worth considering.

I'm not yet convinced I need Suricata or Zenarmor running permanently. I'll probably start with basic OPNsense functionality and experiment with them later. I'll also be choosing AMI BIOS rather than coreboot.

@meyergru

Thanks for pointing out the bridging issue. To clarify, I don't intend to bridge the two LAN interfaces. I would disconnect the cable between the switches and connect each switch to a separate routed OPNsense interface, with its own subnet and firewall rules. VLAN tagging would only be used where needed.

@OPNenthu and @yourfriendarmando

You make a good point about having a spare management port. Being able to access OPNsense directly if something goes wrong with the VLAN configuration is definitely useful.

I'm now leaning towards a device with at least four built-in Intel NICs rather than adding an expansion card.

Thanks everyone for the helpful advice and real-world experiences!

Hi everyone,

Thanks again for all the advice. I've been in contact with Protectli Europe, and they actually recommend the VP4651 for my 24/7 OPNsense firewall.

Their main reasons are the Core i5 processor, dual-channel RAM support, six built-in Intel NICs and completely fanless operation. They consider it a more reliable long-term solution than expanding the N305-based VP3230 with an additional NIC and cooling fan.

I'm now comparing these two models:

Hardware comparison


SpecificationVP2430eVP4651
CPUIntel N150Intel i5-10310U
Generation20252020
Cores / Threads4 / 44 / 8
Base clockNot specified1.7 GHz
Max. turbo3.6 GHz4.4 GHz
CPU power rating6 W15 W
Ethernet4x Intel i226-V6x Intel i226-V
RAMDDR5-4800DDR4-2666
RAM slots12 (dual-channel)
NVMe 228011
CoolingFanlessFanless
Firmware choiceAMI BIOSAMI BIOS
VESA mountIncludedIncluded
Barebone incl. VAT€458.59€700.59

Product links:
https://eu.protectli.com/product/vp2430e/
https://eu.protectli.com/product/vp4651/

RAM costs and total prices

I already own an 8 GB Transcend DDR4-2666 SO-DIMM (TS1GSH64V6B). For the VP4651, I'm considering adding an 8 GB Samsung M471A1K43DB1-CTD for approximately €60.

Protectli confirmed that the specifications match, but the combination hasn't been officially validated, so stability and dual-channel operation aren't guaranteed.

DDR5 prices are currently much higher. Here is my comparison using indicative retail prices:


ConfigurationVP2430eVP4651
8 GB RAM€179€0 (already owned)
Total with 8 GB€637.59€700.59
16 GB RAM€303€60 (additional 8 GB)
Total with 16 GB€761.59€760.59

These totals include VAT but exclude any additional shipping costs. I'll reuse one of my existing WD Red SN700 NVMe drives.

Interestingly, both systems would cost almost exactly the same with 16 GB RAM.

My main concern is whether the older Core i5-10310U is worth choosing over the newer, more energy-efficient N150, especially for continuous 24/7 operation.

I haven't decided whether I'll run Suricata or Zenarmor permanently. For normal routing, VLANs, WireGuard and firewall rules, I understand that either CPU should be sufficient.

Which of these two Protectli models would you choose for a home network and homelab?

I'm particularly interested in long-term reliability, idle power consumption and whether the additional CPU performance and dual-channel RAM of the VP4651 offer a meaningful advantage.

Thanks again for your experiences and advice!

November 18, 2026, 06:27:12 AM #19 Last Edit: November 18, 2026, 06:30:18 AM by tangofan
deleted. posted by mistake...

Quote from: sam1970 on November 17, 2026, 05:36:28 PMMy main concern is whether the older Core i5-10310U is worth choosing over the newer, more energy-efficient N150, especially for continuous 24/7 operation.

I haven't decided whether I'll run Suricata or Zenarmor permanently. For normal routing, VLANs, WireGuard and firewall rules, I understand that either CPU should be sufficient.

Which of these two Protectli models would you choose for a home network and homelab?

I'm particularly interested in long-term reliability, idle power consumption and whether the additional CPU performance and dual-channel RAM of the VP4651 offer a meaningful advantage.

Thanks again for your experiences and advice!
Between those two models you list I would probably go for the VP2430e. According to https://www.cpubenchmark.net/compare/3698vs6304/Intel-i5-10310U-vs-Intel-N150 the i5 is about 12% faster than the N150 both in the single-thread and multi-thread Passmark benchmarks. The question then is: Is this going to make a difference?

Things to consider:
- My J6412 CPU already managed ca. 1.1Gbps with Zenarmor enabled. Since the N150 is about 39% faster in single-thread mode ( https://www.cpubenchmark.net/compare/6304vs4474/Intel-N150-vs-Intel-Celeron-J6412 ), it should reach about 1.5 Gbps. (Back-of-the-envelopt calculation). That is not enough to saturate two switches on the VP2430e, but the VP4651 likely won't saturate them either (even when considering the improved memory architecture). So for Zenarmor it won't make a significant difference.

- I know (by now) that Suricata is multi-threaded, but what the bandwidth for a home network setup would be, I have no idea. I have read though Suricata the really benefits from the better bandwidth of a multi-channel memory architecture. So Suricata should provide for a much higher bandwidth than Zenarmor (say 2x, if you dedicate two CPU cores to it), even before considering the improved memory architecture. At 2x you are already saturating two switches, so do you need more?

- The thoughts above are for your current setup, where each switch has 1G NICs and is connected to a separate port on the router. Perhaps in the future you'd like a faster home network and will upgrade those to 2.5G or 10G? If that is a future consideration, that might change the equation.

- Another question is what traffic you actually want to track with Zenarmor or Suricata? (I say "or", because I don't think "and" really is an option here, the CPU power just isn't there.) In Zenarmor you're supposed to specify LAN interfaces (ideally physical ones) for monitoring. In your case you might track the Wifi, but exclude the homelab, because that's where your servers and your trusted devices reside. Which would mean that a much smaller percentage of your overall network traffic is subject to tracking.

As I previously said, I'm running a Protectli unit with a J6412 CPU and it works well enough. And while it wasn't powerful enough for Zenarmor, it likely would be doing much better with Suricata due to the multithreaded architecture, but at this point I chose to forego IDS/IPS as a security mechanism and rely on IP and domain based blocklists. Of course there are no kids in my household, so I don't need any sophisticated mechanism for content blocking.

If I was sure that I really needed the CPU Horsepower, I would probably get the VP6670 with an i7-1255U. But that's a different price range and when I had similar considerations two years ago, in the end I opted for the J6412, because at the time it was a decent balance between price and performance. Today I would likely opt for the N150 or the i7-1255U.

Just some more food for thought to complicate your decision further. ;)

@tangofan

Thanks again for your detailed advice. I'm leaning towards the VP2430e as well.

Regarding power consumption, electricity currently costs around €0.37/kWh here in Belgium, while a more typical price is €0.27/kWh. Even if the difference in consumption between the two systems amounted to €30 per year at the higher rate, I have solar panels, so I'd estimate my effective additional cost at roughly €15 per year.

That's negligible to me. I think power efficiency sometimes gets more attention than it deserves when comparing devices in this category. Reliability and performance matter more to me.

I have one remaining question, and I'd appreciate your experience and that of the other forum members.

Would you buy the VP2430e with 8 GB or 16 GB RAM?

I have no experience with Zenarmor, so I genuinely don't know whether it would provide a meaningful security benefit for my home network. You mentioned that you eventually stopped using IDS/IPS and now rely on IP and domain blocklists instead.

For someone with my network setup, is Zenarmor actually worth running permanently, or are properly configured firewall rules and blocklists generally sufficient?

If Zenarmor offers little practical benefit in my situation, I'd rather buy the VP2430e with 8 GB RAM and keep the setup simple. If the additional memory makes a meaningful difference, I'm willing to invest in 16 GB.

I'd be interested in hearing what you and the other members would choose based on your experience.

Quote from: sam1970 on November 18, 2026, 10:37:06 AMWould you buy the VP2430e with 8 GB or 16 GB RAM?

I have no experience with Zenarmor, so I genuinely don't know whether it would provide a meaningful security benefit for my home network. You mentioned that you eventually stopped using IDS/IPS and now rely on IP and domain blocklists instead.

For someone with my network setup, is Zenarmor actually worth running permanently, or are properly configured firewall rules and blocklists generally sufficient?

If Zenarmor offers little practical benefit in my situation, I'd rather buy the VP2430e with 8 GB RAM and keep the setup simple. If the additional memory makes a meaningful difference, I'm willing to invest in 16 GB.

I remember that with Zenarmor enabled, I was using 7+GB of RAM. That was running OPnsense on ZFS (which has its own filesystem cache called "Adaptive Replacement Cache" or "ARC") with several plugins like os-crowdsec (blocklists), os-q-feeds-connector (IP- and DNS blocklists), os-tailscale and a few smaller ones. Under no circumstances would I forego ZFS and I strongly recommend that you also use ZFS, instead of UFS, as your file system. The option to take snapshots and rollback your configuration, if an update goes awry, is just too good to give up. At the moment I am using 1.2 GB of RAM and that is with both AdGuard and Unbound having blocklists configured (though Unbound is currently not in my active DNS chain and just "chilling").

So the RAM usage of Zenarmor (and presumably of Suricata as well) is enormous and I would not be comfortable with 8GB RAM, if I were to use either. That gets right to the question then, whether they will be useful. Zenarmor is designed to run on the LAN interface(s), not on the WAN interface, so its focus is on outgoing requests (though it may apply some filtering to responses as well, I don't know). What I liked about Zenarmor was the ability to finely tune, what kind of requests I wanted to block, e.g. I could block "VPN-providers" as a category, but then exempt perhaps a particular VPN-provider that I am using. For blocklists you would need a particular blocklist for that kind of request to do the same. For VPN provides such a blocklist ist available IIRC, but if you want to go specific on other kinds of requests (say for example "Torrent Servers") you'd have to find that blocklist or even make one yourself. BTW that configuration granularity is only available with a paid Zenarmor subscription (which I had for two years), the free version gives you significantly fewer screws to turn. Again, just my impression of Zenarmor, I really don't know much of anything about Suricata.

The question then is: Do you need that kind of granularity and flexibility for your blocking of client requests? Perhaps if you have children in your household, but then you'll need to be ready to paid 100 Euros per year or so for a home subscription. I decided that for me this granularity was only "nice to have", but you have to judge for yourself what your needs are. If you decide, that you want to give this a try, I would lean toward getting 16 GB of RAM, just to have some headroom. (In fact for my case - as I said in my previous post - I would even lean to the VP4651 with the i7, since I have a 2.5GB connection from OPNsense to my 10GB switch.) As an aside, in hindsight I am actually glad that I got rid of Zenarmor a few months ago. The company's policy re. "multi-threading", essentially "It will be available 'soon', but only on the highest business subscription tiers and everyone else will still get to use a single thread", was a major turn-off for me. Had they provided/promised that the home subscription tier would get a 2-thread or 4-thread cap (instead of the current 1-thread cap), I would have stayed with my paid home subscription.

If you really can't decide on the memory, I would spend that extra 130 Euros or so on 16GB of RAM just for the optionality. But that's how I roll.

BTW here is what I am currently using in terms of security:
- The built-in firewall (of course)
- Maxmind GeoIP (blocks incoming WAN requests that are assigned to geo locations that you want to block)
- Q-Feeds plugin (provides ip and dns blocking list). I actually have the paid "Plus" subscription
- Crowdsec plugin (also IP and DNS blocklists)
- Blocklists in Unbound/AdGuard (the latter being available as a plugin (I just started using AdGuard, so I mirrored my Unbound blocklists into AdGuard)

There is almost certainly some overlap between the blocklists from Crowdsec Q-Feeds and Unbound/Adguard, but I do not mind. Processing is plenty fast and memory consumption is not an issue at all.

Hope that helps.

Quote from: sam1970 on November 18, 2026, 10:37:06 AMhere in Belgium
Since you are "My Southern Neighbour" so to speak I am guessing you will easily find your way at https://tweakers.net or already know about it ? :)

My advise would be to look around in this topic : https://gathering.tweakers.net/forum/list_messages/1622491
And look for a nice Intel N100 powered Mini PC with Y-shaped fins here : https://tweakers.net/aanbod/
If that doesn't work out as expected you can also try https://www.marktplaats.nl/ ofcourse!

The reason I am mentioning this is that hardware got annoyingly expensive and second hand/used hardware might be the best choice right now!

It's how I got my TopTon and in case I need another (Any brand will do!) one I will probably make the same choice again :)



Now to answer some of the stuff you mentioned :

Quote from: sam1970 on November 16, 2026, 08:18:21 PMa QNAP TS-664 running Docker containers (Pi-hole, Unbound, WireGuard), and a Raspberry Pi 5 running a second Pi-hole.
I also use Proton VPN for selected traffic.
&
Quote4. Which OPNsense plugins or features would you recommend for a homelab?
I'm considering Suricata, Zenarmor, ntopng, WireGuard and policy-based routing through Proton VPN.
5. Would you recommend keeping my existing Pi-hole installations, or would Unbound with DNS filtering in OPNsense be a good alternative?
I would suggest keeping those where they are : The less unneeded stuff on your OPNsense the better!

My OPNsense for example does not run any kind of DNS at all : Everything is done by Pi-Hole + Unbound running seperately on bare metal Debian as shown @ https://docs.pi-hole.net/guides/dns/unbound/ :)


For IPS/IDS things I suggest to take a look at their sub-forum : https://forum.opnsense.org/index.php?board=27.0
TL;DR : Probably stuff you want to skip and don't actually need or will get bored by it after some time and eventually uninstall completely!

QuoteI'm also considering NetAlertX as a replacement for Fing for network device discovery.
If you configure your DHCP range properly then the Dynamic IP Pool Clients List becomes the New Devices on your network List ;)

Quotetwo physical network ports are enough.
IMHO you need at least 4 of them :
- igc0 = WAN
- igc1 = Default LAN a.k.a. Management Network
- igc2 = Home Network
- igc3 = Dedicated VLANs Interface for everything else!

QuoteAmazon
Black Friday/Cyber Monday coming up = Good time to shop around at AliExpress for Chinese Mini PCs in general, but not sure what the impact is of the current hardware prices...

QuoteI already have the following components available:

- 8 GB Transcend DDR4-2666 SO-DIMM (TS1GSH64V6B).
- 2× WD Red SN700, 250 GB NVMe M.2 2280.
Consider those to be precious and treat them as such!

For example consider them as Spare Parts rather than using (both of) them :)

Quote1. Does anyone have experience with this HUNSN N305? How reliable is it for 24/7 operation, particularly regarding cooling, power consumption, BIOS support and potential Intel i226-V issues?
Anything will do : You just have to make sure they are properly cooled and have the right passive cooling case built around them.

Good contact with the SoC is also another important detail !!

Quote3. Based on your own experience, are there any better mini PCs you would recommend?
To my surprice there have been a lot of weird issues with Protectli units lately here on the forum while they are supposed to be one of the better/best brands out there, so that's something to think about...
Weird guy who likes everything Linux and *BSD on PC/Laptop/Tablet/Mobile and funny little ARM based boards :)

@tangofan

Thanks for taking the time to explain your experience with Zenarmor and the different security options.

Your feedback helped me make a decision. I don't want to pay for software subscriptions, and since you eventually stopped using Zenarmor yourself, even after having a paid subscription, I don't see much reason to install the limited free version.

I'll focus on properly configured firewall rules, network segmentation and free IP/DNS blocklists instead. I already have Pi-hole and Unbound running separately, so I can continue using those.

Your advice about ZFS is also useful. I'll use ZFS on my existing WD Red SN700 NVMe drive and keep external configuration backups on my NAS.

With Zenarmor out of the picture, I think 8 GB RAM should be sufficient for my first OPNsense setup. I can always reconsider later if I find a genuine need for Suricata.

I'm now leaning strongly towards the Protectli VP2430e with the N150, four Intel NICs, 8 GB DDR5 and AMI BIOS.

Thanks again. Your practical experience has been much more useful than simply comparing specifications.

@nero355

Thanks for your suggestions, neighbour!

I know Tweakers and Marktplaats quite well, and I understand your point about second-hand hardware. However, for a device that will be running my entire home network 24/7, I'd prefer a new appliance from an established supplier, with proper warranty and firmware support.

I completely agree about having at least four physical NICs. My intended configuration is:

- Port 1: WAN, connected to the ISP router
- Port 2: Homelab switch
- Port 3: Home/WiFi/IoT switch
- Port 4: Dedicated management/rescue port

I'll also keep my existing Pi-hole and Unbound installations on the QNAP, with a second Pi-hole on my Raspberry Pi 5. I'd rather keep OPNsense focused on routing, firewall rules and network segmentation.

After reading the experiences shared here, I've also decided not to install Zenarmor. I don't want any paid software subscriptions, and I'm not convinced the limited free version would add much value to my network. I'll start with basic OPNsense functionality and free blocklists.

I'm currently leaning towards the Protectli VP2430e with an Intel N150, four Intel i226-V ports, 8 GB DDR5 and AMI BIOS.

One thing you mentioned does concern me, though: the recent issues with Protectli appliances.

Could you point me to a few specific forum threads or tell me which models were affected? I'm particularly interested in any reported stability, overheating or firmware issues with the VP2430e.

I'd like to investigate those before making my final purchase.

Thanks again for your advice!