25.10.1_2 Business SSH and WebUI hangs up on a Deciso Appliance

[Wuensch-AG-Adm]

Dear Community,
After two or three updates, I'm writing to say that I'm still having issues with the WebUI and even with an unresponsive SSH. We use the Business version of the system and typically a hardware appliance that is fully compatible with the system, since it is a Deciso/OPNSense product. 8 GB AMD EPYC 3101 4-core processor DEC3840 – OPNsense

 top -aSH
last pid: 37524;  load averages: 19.72, 22.81, 27.25                                                                                                                                 up 75+17:14:16  17:25:58
722 threads:   23 running, 677 sleeping, 22 waiting
CPU:  6.3% user,  0.0% nice, 93.6% system,  0.2% interrupt,  0.0% idle
Mem: 2338M Active, 3065M Inact, 504M Laundry, 971M Wired, 2058K Buf, 874M Free
ARC: 308M Total, 63M MFU, 136M MRU, 38M Anon, 2677K Header, 68M Other
     144M Compressed, 480M Uncompressed, 3.34:1 Ratio
Swap: 8418M Total, 4243M Used, 4175M Free, 50% Inuse

  PID USERNAME    PRI NICE   SIZE    RES STATE    C   TIME    WCPU COMMAND
28535 root         68    0    17M  2624K RUN      0   0:04  72.71% /sbin/ifconfig -m -v
24521 root         68    0    17M  2628K CPU2     2   0:04  57.40% /sbin/ifconfig -m -v
    0 root        -64    -     0B  1712K CPU3     3 526.4H  55.32% [kernel{if_igc3_tq}]
22164 root         68    0    17M  2624K RUN      1   0:03  42.03% /sbin/ifconfig -m -v
33088 root         94    0    17M  2624K RUN      3   0:02  40.91% /sbin/ifconfig -m -v
33192 root         68    0    17M  2612K CPU1     1   0:03  33.31% /sbin/ifconfig -m -v
36021 root         68    0    17M  2624K RUN      2   0:01  13.56% /sbin/ifconfig -m -v
61959 ntopng       32    0   716M   186M RUN      0 274.2H   4.84% /usr/local/bin/ntopng /usr/local/etc/ntopng.conf -U ntopng -G /var/run/ntopng/ntopng.pid -1 /usr/local/share/ntopng/httpdocs -2 /usr/local
  370 root         68    0   246M    49M accept   1   1:19   0.28% /usr/local/bin/python3 /usr/local/opnsense/service/configd.py console (python3.11){python3.11}


This happens every time I stay on the dashboard for too long.
Is there a patch or another solution I can implement myself?

Thank you in advance

Regards,

Joel

[Patrick M. Hausen]

Have you tried disabling ntopng?

[Wuensch-AG-Adm]

Have you tried disabling ntopng?

I'm trying this option right now.
Thanks.

[Wuensch-AG-Adm]

Have you tried disabling ntopng?

I'm getting an error with Gateways and Interface Statistics -> Failed to load widget.

[Patrick M. Hausen]

Reload the page? Possibly you are logged out?