Some Widget not working on Dashboard

[Nephiria]

Hi All,

i have some Widget on Dashboard that is not working.
Anyone have a Solution for that?

Look here:

https://ibb.co/LdFFMj5p

https://ibb.co/rRjZBBTc

My Hardware Specs:

---<<BOOT>>---
Copyright (c) 1992-2023 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 14.3-RELEASE-p8 stable/26.1-n271977-c961e158e272 SMP amd64
FreeBSD clang version 19.1.7 (https://github.com/llvm/llvm-project.git llvmorg-19.1.7-0-gcd708029e0b2)
[1] VT(vga): resolution 640x480
[1] CPU microcode: updated from 0x1d to 0x24000026
[1] CPU: Intel(R) Celeron(R) N5105 @ 2.00GHz (1996.80-MHz K8-class CPU)
[1]   Origin="GenuineIntel"  Id=0x906c0  Family=0x6  Model=0x9c  Stepping=0
[1]   Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
[1]   Features2=0x4ff8ebbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,RDRAND>
[1]   AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
[1]   AMD Features2=0x101<LAHF,Prefetch>
[1]   Structured Extended Features=0x2394a2c3<FSGSBASE,TSCADJ,FDPEXC,SMEP,ERMS,NFPUSG,PQE,RDSEED,SMAP,CLFLUSHOPT,CLWB,PROCTRACE,SHA>
[1]   Structured Extended Features2=0x18400124<UMIP,WAITPKG,GFNI,RDPID,MOVDIRI,MOVDIR64B>
[1]   Structured Extended Features3=0xfc000400<MD_CLEAR,IBPB,STIBP,L1DFL,ARCH_CAP,CORE_CAP,SSBD>
[1]   XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES>
[1]   IA32_ARCH_CAPS=0x14020c6b<RDCL_NO,IBRS_ALL,SKIP_L1DFL_VME,MDS_NO>
[1]   VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr
[1]   TSC: P-state invariant, performance statistics
[1] real memory  = 17179869184 (16384 MB)
[1] avail memory = 16403177472 (15643 MB)
[1] Event timer "LAPIC" quality 600
[1] ACPI APIC Table: <ALASKA A M I >
[1] WARNING: L1 data cache covers fewer APIC IDs than a core (0 < 1)
[1] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
[1] FreeBSD/SMP: 1 package(s) x 4 core(s)
[1] random: registering fast source Intel Secure Key RNG
[1] random: fast provider: "Intel Secure Key RNG"
[1] random: unblocking device.
[1] ioapic0 <Version 2.0> irqs 0-119
[1] Launching APs: 2 1 3
[1] random: entropy device external interface
[1] wlan: mac acl policy registered
[1] kbd1 at kbdmux0
[1] WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 15.0.
[1] efirtc0: <EFI Realtime Clock>
[1] efirtc0: registered as a time-of-day clock, resolution 1.000000s
[1] smbios0: <System Management BIOS> at iomem 0x78d7a000-0x78d7a017
[1] smbios0: Entry point: v3 (64-bit), Version: 3.3
[1] aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256>
[1] acpi0: <ALASKA A M I >
[1] acpi0: Power Button (fixed)
[1] cpu0: <ACPI CPU> on acpi0
[1] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
[1] Timecounter "HPET" frequency 19200000 Hz quality 950
[1] Event timer "HPET" frequency 19200000 Hz quality 550
[1] Event timer "HPET1" frequency 19200000 Hz quality 440
[1] Event timer "HPET2" frequency 19200000 Hz quality 440
[1] Event timer "HPET3" frequency 19200000 Hz quality 440
[1] Event timer "HPET4" frequency 19200000 Hz quality 440
[1] atrtc1: <AT realtime clock> on acpi0
[1] atrtc1: Warning: Couldn't map I/O.
[1] atrtc1: registered as a time-of-day clock, resolution 1.000000s
[1] Event timer "RTC" frequency 32768 Hz quality 0
[1] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
[1] Timecounter "i8254" frequency 1193182 Hz quality 0
[1] Event timer "i8254" frequency 1193182 Hz quality 100
[1] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
[1] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0
[1] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
[1] pci0: <ACPI PCI bus> on pcib0
[1] vgapci0: <VGA-compatible display> port 0x3000-0x303f mem 0x6000000000-0x6000ffffff,0x4000000000-0x400fffffff at device 2.0 on pci0
[1] vgapci0: Boot video device
[1] xhci0: <XHCI (generic) USB 3.0 controller> mem 0x6001100000-0x600110ffff at device 20.0 on pci0
[1] xhci0: 32 bytes context size, 64-bit DMA
[1] usbus0 on xhci0
[1] usbus0: 5.0Gbps Super Speed USB v3.0
[1] pci0: <memory, RAM> at device 20.2 (no driver attached)
[1] pci0: <simple comms> at device 22.0 (no driver attached)
[1] ahci0: <AHCI SATA controller> port 0x3090-0x3097,0x3080-0x3083,0x3060-0x307f mem 0x80800000-0x80801fff,0x80803000-0x808030ff,0x80802000-0x808027ff at device 23.0 on pci0
[1] ahci0: AHCI v1.31 with 2 6Gbps ports, Port Multiplier not supported
[1] ahcich0: <AHCI channel> at channel 0 on ahci0
[1] ahcich1: <AHCI channel> at channel 1 on ahci0
[1] pcib1: <ACPI PCI-PCI bridge> at device 28.0 on pci0
[1] pci1: <ACPI PCI bus> on pcib1
[1] igc0: <Intel(R) Ethernet Controller I226-V> mem 0x80600000-0x806fffff,0x80700000-0x80703fff at device 0.0 on pci1
[1] igc0: EEPROM V2.14-0 eTrack 0x80000290
[1] igc0: Using 2048 TX descriptors and 2048 RX descriptors
[1] igc0: Using 4 RX queues 4 TX queues
[1] igc0: Using MSI-X interrupts with 5 vectors
[1] igc0: Ethernet address: 60:be:b4:0d:88:c6
[1] igc0: netmap queues/slots: TX 4/2048, RX 4/2048
[1] pcib2: <ACPI PCI-PCI bridge> at device 28.3 on pci0
[1] pci2: <ACPI PCI bus> on pcib2
[1] igc1: <Intel(R) Ethernet Controller I226-V> mem 0x80400000-0x804fffff,0x80500000-0x80503fff at device 0.0 on pci2
[1] igc1: EEPROM V2.14-0 eTrack 0x80000290
[1] igc1: Using 1024 TX descriptors and 1024 RX descriptors
[1] igc1: Using 4 RX queues 4 TX queues
[1] igc1: Using MSI-X interrupts with 5 vectors
[1] igc1: Ethernet address: 60:be:b4:0d:88:c7
[1] igc1: netmap queues/slots: TX 4/1024, RX 4/1024
[1] pcib3: <ACPI PCI-PCI bridge> at device 28.4 on pci0
[1] pci3: <ACPI PCI bus> on pcib3
[1] igc2: <Intel(R) Ethernet Controller I226-V> mem 0x80200000-0x802fffff,0x80300000-0x80303fff at device 0.0 on pci3
[1] igc2: EEPROM V2.14-0 eTrack 0x80000290
[1] igc2: Using 1024 TX descriptors and 1024 RX descriptors
[1] igc2: Using 4 RX queues 4 TX queues
[1] igc2: Using MSI-X interrupts with 5 vectors
[1] igc2: Ethernet address: 60:be:b4:0d:88:c8
[1] igc2: netmap queues/slots: TX 4/1024, RX 4/1024
[1] pcib4: <ACPI PCI-PCI bridge> at device 28.5 on pci0
[1] pci4: <ACPI PCI bus> on pcib4
[1] igc3: <Intel(R) Ethernet Controller I226-V> mem 0x80000000-0x800fffff,0x80100000-0x80103fff at device 0.0 on pci4
[1] igc3: EEPROM V2.14-0 eTrack 0x80000290
[1] igc3: Using 1024 TX descriptors and 1024 RX descriptors
[1] igc3: Using 4 RX queues 4 TX queues
[1] igc3: Using MSI-X interrupts with 5 vectors
[1] igc3: Ethernet address: 60:be:b4:0d:88:c9
[1] igc3: netmap queues/slots: TX 4/1024, RX 4/1024
[1] pcib5: <ACPI PCI-PCI bridge> at device 28.6 on pci0
[1] pci5: <ACPI PCI bus> on pcib5
[1] igc4: <Intel(R) Ethernet Controller I226-V> mem 0x7fe00000-0x7fefffff,0x7ff00000-0x7ff03fff at device 0.0 on pci5
[1] igc4: EEPROM V2.14-0 eTrack 0x80000290
[1] igc4: Using 1024 TX descriptors and 1024 RX descriptors
[1] igc4: Using 4 RX queues 4 TX queues
[1] igc4: Using MSI-X interrupts with 5 vectors
[1] igc4: Ethernet address: 60:be:b4:0d:88:ca
[1] igc4: netmap queues/slots: TX 4/1024, RX 4/1024
[1] pcib6: <ACPI PCI-PCI bridge> at device 28.7 on pci0
[1] pci6: <ACPI PCI bus> on pcib6
[1] igc5: <Intel(R) Ethernet Controller I226-V> mem 0x7fc00000-0x7fcfffff,0x7fd00000-0x7fd03fff at device 0.0 on pci6
[1] igc5: EEPROM V2.14-0 eTrack 0x80000290
[1] igc5: Using 1024 TX descriptors and 1024 RX descriptors
[1] igc5: Using 4 RX queues 4 TX queues
[1] igc5: Using MSI-X interrupts with 5 vectors
[1] igc5: Ethernet address: 60:be:b4:0d:88:cb
[1] igc5: netmap queues/slots: TX 4/1024, RX 4/1024
[1] isab0: <PCI-ISA bridge> at device 31.0 on pci0
[1] isa0: <ISA bus> on isab0
[1] hdac0: <Intel Jasper Lake HDA Controller> mem 0x6001120000-0x6001123fff,0x6001000000-0x60010fffff at device 31.3 on pci0
[1] pci0: <serial bus> at device 31.5 (no driver attached)
[1] acpi_button0: <Sleep Button> on acpi0
[1] acpi_button1: <Power Button> on acpi0
[1] acpi_tz0: <Thermal Zone> on acpi0
[1] atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
[1] atkbd0: <AT Keyboard> irq 1 on atkbdc0
[1] kbd0 at atkbd0
[1] atkbd0: [GIANT-LOCKED]
[1] ns8250: UART FCR is broken
[1] ns8250: UART FCR is broken
[1] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
[1] ns8250: UART FCR is broken
[1] uart0: console (115200,n,8,1)
[1] ns8250: UART FCR is broken
[1] ns8250: UART FCR is broken
[1] uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
[1] acpi_syscontainer0: <System Container> on acpi0
[1] acpi_syscontainer1: <System Container> on acpi0
[1] atrtc0: <AT realtime clock> at port 0x70 irq 8 on isa0
[1] atrtc0: Warning: Couldn't map I/O.
[1] atrtc0: registered as a time-of-day clock, resolution 1.000000s
[1] atrtc0: Can't map interrupt.
[1] hwpstate_intel0: <Intel Speed Shift> on cpu0
[1] cpufreq0: <CPU frequency control> on cpu0
[1] hwpstate_intel1: <Intel Speed Shift> on cpu1
[1] cpufreq1: <CPU frequency control> on cpu1
[1] hwpstate_intel2: <Intel Speed Shift> on cpu2
[1] cpufreq2: <CPU frequency control> on cpu2
[1] hwpstate_intel3: <Intel Speed Shift> on cpu3
[1] cpufreq3: <CPU frequency control> on cpu3
[1] Timecounter "TSC" frequency 1996803693 Hz quality 1000
[1] Timecounters tick every 1.000 msec
[2] ZFS filesystem version: 5
[2] ZFS storage pool version: features support (5000)
[2] hdacc0: <Intel Jasper Lake HDA CODEC> at cad 2 on hdac0
[2] hdaa0: <Intel Jasper Lake Audio Function Group> at nid 1 on hdacc0
[2] pcm0: <Intel Jasper Lake (HDMI/DP 8ch)> at nid 4 on hdaa0
[2] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <FORESEE 128GB SSD V4.30.2> ACS-3 ATA SATA 3.x device
ada0: Serial Number NEH437Q011880
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes)
ada0: Command Queueing enabled
ada0: 122104MB (250069680 512 byte sectors)
[2] Trying to mount root from zfs:zroot/ROOT/default []...
[2] ugen0.1: <Intel XHCI root HUB> at usbus0
[2] uhub0 on usbus0
[2] uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
[3] uhub0: 14 ports with 14 removable, self powered
[3] Mounting filesystems...
[3] no pools available to import
[3] Setting hostuuid: 42bc2e5c-b51b-43ee-9591-352745e081b5.
[3] Setting hostid: 0x96ca5550.
[3] Configuring vt: keymap.
[3] >>> Invoking import script 'importer'
[3] Configuring crash dump device: /dev/ada0p3
[3] swapon: adding /dev/ada0p3 as swap device
[3] .ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/local/lib /usr/local/lib/compat/pkg /usr/local/lib/compat/pkg /usr/local/lib/ipsec /usr/local/lib/perl5/5.42/mach/CORE
[3] 32-bit compatibility ldconfig path:
[3] done.
[4] >>> Invoking early script 'upgrade'
[4] >>> Invoking early script 'configd'
[4] Starting configd.
[5] >>> Invoking early script 'templates'
[5] Generating configuration: templates...done
[10] >>> Invoking early script 'backup'
[10] >>> Invoking backup script 'captiveportal'
[10] >>> Invoking backup script 'netflow'
[10] >>> Invoking backup script 'rrd'
[12] >>> Invoking early script 'carp'
[12] CARP event system: OK
[12] Launching the init system...done.
[12] Initializing..........done.
[13] igc0: link state changed to UP
[13] igc1: link state changed to UP
[13] igc2: link state changed to UP
[14] Starting device manager...
[14] acpi_wmi0: <ACPI-WMI mapping> on acpi0
[14] acpi_wmi0: cannot find EC device
[14] acpi_wmi0: Embedded MOF found
[14] ACPI: \134_SB.WFDE.WQCC: 1 arguments were passed to a non-method ACPI object (Buffer) (20221020/nsarguments-361)
[14] acpi_wmi1: <ACPI-WMI mapping> on acpi0
[14] acpi_wmi1: cannot find EC device
[14] acpi_wmi1: Embedded MOF found
[14] ACPI: \134_SB.WFTE.WQCC: 1 arguments were passed to a non-method ACPI object (Buffer) (20221020/nsarguments-361)
[16] done.
[16] Configuring login behaviour...done.
[17] Configuring loopback interface...
[17] lo0: link state changed to UP
[17] done.
[17] Configuring kernel modules...
[17] qat_ocf0: <QAT engine>
[17] done.
[17] Setting up extended sysctls...done.
[17] Setting timezone: Europe/Zurich
[17] Writing firmware settings: FreeBSD OPNsense
[17] Writing trust files...done.
[17] Scanning /usr/share/certs/untrusted for certificates...
Scanning /usr/share/certs/trusted for certificates...
Scanning /usr/local/share/certs for certificates...
[17] certctl: Modified 192 trust store links.
[17] Writing trust bundles...done.
[18] Setting hostname: opensense01.freenet.dom
[18] Generating /etc/resolv.conf...done.
[18] Generating /etc/hosts...done.
[18] Configuring system logging...done.
[18] Configuring firewall.......done.
[19] Configuring hardware interfaces...done.
[19] Configuring loopback interface...done.
[19] Configuring LAGG interfaces...done.
[19] Configuring VLAN interfaces...done.
[19] Configuring ISCSI interface...
[19] igc2: link state changed to DOWN
[19] done.
[19] Configuring LAN interface...
[19] igc1: link state changed to DOWN
[19] done.
[19] Configuring WAN interface...
[19] igc0: link state changed to DOWN
[19] done.
[20] Generating /etc/resolv.conf...done.
[20] Generating /etc/hosts...done.
[20] Configuring firewall.......done.
[20] Configuring OpenSSH...done.
[20] Starting web GUI...done.
[20] Setting up routes...done.
[21] Starting Unbound DNS...done.
[22] Configuring firewall.....
[22] igc0: link state changed to UP
[22] igc2: link state changed to UP
[22] ..
[22] igc1: link state changed to UP
[23] done.
[23] Setting up gateway monitor...done.
[23] Syncing OpenVPN settings...done.
[23] Configuring WireGuard VPN...
[23] wg0: link state changed to UP
[23] done.
[23] Starting DHCP relays...done.
[23] Starting NTP service...done.
[23] Starting Unbound DNS...
[24] done.
[24] >>> Invoking start script 'newwanip'
[24] >>> Invoking start script 'freebsd'
[24] setup igc2
[24] setup igc1
[24] error : interface opt5 not found
[24] error : interface opt3 not found
[24] error : interface opt1 not found
[25] Starting acme_http_challenge.
[25] Starting hostwatch.
[25] Starting redis.
[25] Starting clamav_clamd.
[38] Starting haproxy.
[38] Starting rspamd.
[38] 2026-02-20 12:10:09 #38576(main) <8060fd>; main; main: rspamd 3.14.0 is loading configuration, build id: release
[38] Starting clamav_freshclam.
[39] Updating aliases
[39] Certificates generated /usr/local/etc/postfix/cert_opn.pem
[39] Certificates generated /usr/local/etc/postfix/ca_opn.pem
[39] postfix: Postfix is using backwards-compatible default settings
[39] postfix: See https://www.postfix.org/COMPATIBILITY_README.html for details
[39] postfix: To disable backwards compatibility use "postconf compatibility_level=3.6" and "postfix reload"
[39] /usr/local/sbin/postconf: warning: /usr/local/etc/postfix/main.cf: support for parameter "smtpd_tls_dh1024_param_file" will be removed; instead, do not specify (leave at default)
[39] /usr/local/sbin/postconf: warning: /usr/local/etc/postfix/main.cf: support for parameter "smtpd_use_tls" will be removed; instead, specify "smtpd_tls_security_level"
[39] postfix/postfix-script: starting the Postfix mail system
[39] >>> Invoking start script 'syslog'
[39] >>> Invoking start script 'haproxy'
[39] >>> Invoking start script 'carp'
[39] >>> Invoking start script 'cron'
[39] Starting Cron: OK
[40] >>> Invoking start script 'openvpn'
[40] >>> Invoking start script 'sysctl'
[41] Service `sysctl' has been restarted.
[41] >>> Invoking start script 'beep'
[42] Root file system: zroot/ROOT/default
[42] Fri Feb 20 12:10:13 CET 2026
[42]
*** XXX:  OPNsense 26.1.2_5 (amd64) ***

Thats my Firewall that i have buy for some Years.
https://www.amazon.de/dp/B0B4P354QG

I hope now i have all Informationen submited.

Thanks all.