OPNsense 25.7.10 Ethernet detach problem

Started by burns1230, Today at 07:58:49 AM

Previous topic - Next topic
Hi everyone!
I recently upgraded from 25.1 to 25.7.
The current version is 25.7.10.

However, after upgrading, the LAN keeps repeating detach and attach, and ultimately cannot connect to the system.
The system can only be used again after reboot.

System: Log Files: General

2026-01-23T07:32:15 Notice kernel     <6>[82529] bge8: link state changed to UP
2026-01-23T07:32:15 Notice opnsense   /usr/local/etc/rc.linkup: DEVD: Ethernet attached event for opt6(bge8)
2026-01-23T07:32:13 Notice kernel     <6>[82527] bge8: link state changed to DOWN
2026-01-23T07:32:13 Notice opnsense   /usr/local/etc/rc.linkup: DEVD: Ethernet detached event for opt6(bge8)
2026-01-23T07:32:07 Notice kernel     <6>[82522] bge8: link state changed to UP
2026-01-23T07:32:07 Notice opnsense   /usr/local/etc/rc.linkup: DEVD: Ethernet attached event for opt6(bge8)
2026-01-23T07:32:02 Notice opnsense   /usr/local/etc/rc.linkup: DEVD: Ethernet detached event for opt6(bge8)
2026-01-23T07:32:02 Notice kernel     <6>[82516] bge8: link state changed to DOWN

What should I do?
Should I downgrade to 25.1?


Today at 10:07:25 AM #1 Last Edit: Today at 10:11:28 AM by iMx
I cannot comment on changes between 25.1 and 25.7 specifically, nor first hand experience with bge interfaces ....

... BUT if you have ASPM enabled in the BIOS, I'd try turning that off (everywhere). 

Also set a tuneable, then reboot after setting:

hw.pci.enable_aspm=0
.. has fixed all sorts of interface randomness over the years for me, although primarily on Intel.  Then if you want to narrow it down after - i.e it resolves the issue - selectively re-enable.

You can check ASPM state with:

pciconf -lcv |grep -i aspm