Zenarmor Not Recognizing Second Hard Drive

[nominion]

I'm hoping that someone can point me in the right direction with an issue I'm having with my OPNsense (v25.1.4_1) installation running Zenarmor (v1.18.6). 

When I did my original configuration of Zenarmor, I moved the Elasticsearch reporting database (v8.11.3) to a second hard drive with more capacity than the drive where OPNsense is installed.  On the Zenarmor dashboard, the hard drive would show up Disk Space Utilization widget as /mnt/storage.

Recently, the reporting database stopped and will not start (perhaps after upgrading to v25.4.1 of OPNsense).  In the Disk Space Utilization widget, /mnt/storage no longer shows up.  From the shell, the second hard drive seems to be available (in bold).  Here is what I see from the shell:

root@home-fwr:/ # geom disk list
Geom name: mmcsd0
Providers:
1. Name: mmcsd0
   Mediasize: 15634268160 (15G)
   Sectorsize: 512
   Stripesize: 512
   Stripeoffset: 0
   Mode: r3w3e6
   descr: MMCHC AJTD4R 0.6 SN 2FFCD408 MFG 10/2022 by 21 0x0000
   ident: 2FFCD408
   rotationrate: 0
   fwsectors: 0
   fwheads: 0

Geom name: mmcsd0boot0
Providers:
1. Name: mmcsd0boot0
   Mediasize: 4194304 (4.0M)
   Sectorsize: 512
   Stripesize: 512
   Stripeoffset: 0
   Mode: r0w0e0
   descr: MMCHC AJTD4R 0.6 SN 2FFCD408 MFG 10/2022 by 21 0x0000
   ident: 2FFCD408
   rotationrate: 0
   fwsectors: 0
   fwheads: 0

Geom name: mmcsd0boot1
Providers:
1. Name: mmcsd0boot1
   Mediasize: 4194304 (4.0M)
   Sectorsize: 512
   Stripesize: 512
   Stripeoffset: 0
   Mode: r0w0e0
   descr: MMCHC AJTD4R 0.6 SN 2FFCD408 MFG 10/2022 by 21 0x0000
   ident: 2FFCD408
   rotationrate: 0
   fwsectors: 0
   fwheads: 0

Geom name:nda0
Providers:
1. Name: nda0
   Mediasize: 500107862016 (466G)
   Sectorsize: 512
   Mode: r0w0e0
   descr: CT500P3SSD8
   lunid: 000000000000000100a075244bc37b34
   ident: 24414BC37B34
   rotationrate: 0
   fwsectors: 0
   fwheads: 0

root@home-fwr:/ # gpart show
=>      40  30535600  mmcsd0  GPT  (15G)
        40    532480       1  efi  (260M)
    532520      1024       2  freebsd-boot  (512K)
    533544       984          - free -  (492K)
    534528  16777216       3  freebsd-swap  (8.0G)
  17311744  13221888       4  freebsd-zfs  (6.3G)
  30533632      2008          - free -  (1.0M)

=>       40  976773088  nda0  GPT  (466G)
         40  976773088     1  freebsd-ufs  (466G)

Here is here how I have fstab configured, which worked before and has not changed:

# Device        Mountpoint      FStype  Options Dump    Pass#
/dev/nda0p1     /mnt/storage    ufs     rw      2       2
/dev/gpt/efiboot0       /boot/efi               msdosfs rw      2       2
fdesc   /dev/fd         fdescfs rw      0       0
proc    /proc           procfs  rw      0       0
/dev/mmcsd0p3   none            swap    sw      0       0

I can create and delete folders and files from /mnt/storage.

Does anyone have any thoughts on what I'm missing?

Thanks in advance.

[cookiemonster]

Zenarmor > Settings > Database. There is a setting there "Directory Storing Database Files". I would look there if perhaps is not pointing to your modified location.

[nominion]

The Zenarmor reporting database setting is configured for:  /mnt/storage/elasticsearch

I can navigate to that folder via the shell.  I can create folders/files in that directory. 

When I try to delete and recreate the database, I get Error 200.

Are there logs that might help me understand what is going on?

[cookiemonster]

stepping away, just wanted to see if you had checked that.

[sy]

Hi,

Please share a report with the team by following the instructions in the below link

https://zenarmor.com/docs/support/reporting-bug

[nominion]

Feedback submitted.  I checked the boxes to include everything, along with a screenshot (not that it shows much).

[sy]

Hi,

Thank you once again for your cooperation. The issue was related to an unclean file system and has been resolved.