nut failure

[unixpgmr]

I have setup nut client on OPNSense.  I get nothing in the Diagnostics and the logs tell me that: UPS [non-server-apc]: connect failed: Connection failure: Connection refused.  However when I log onto the system and do non-server-apc@<ip address>, I get the following
battery.charge: 84
battery.charge.low: 10
battery.charge.warning: 50
battery.date: 2001/09/25
battery.mfr.date: 2019/12/03
battery.runtime: 773
battery.runtime.low: 120
battery.type: PbAc
battery.voltage: 27.4
battery.voltage.nominal: 24.0
device.mfr: American Power Conversion
device.model: Back-UPS RS 1000MS
device.serial: 3B1949X21182 
device.type: ups
driver.name: usbhid-ups
driver.parameter.bus: 001
driver.parameter.pollfreq: 30
driver.parameter.pollinterval: 2
driver.parameter.port: auto
driver.parameter.product: Back-UPS RS 1000MS FW:950.e3 .D USB FW:e3
driver.parameter.productid: 0002
driver.parameter.serial: 3B1949X21182
driver.parameter.synchronous: auto
driver.parameter.vendor: American Power Conversion
driver.parameter.vendorid: 051D
driver.version: 2.8.0
driver.version.data: APC HID 0.98
driver.version.internal: 0.47
driver.version.usb: libusb-1.0.26 (API: 0x1000109)
input.sensitivity: medium
input.transfer.high: 144
input.transfer.low: 88
input.transfer.reason: input voltage out of range
input.voltage: 121.0
input.voltage.nominal: 120
ups.beeper.status: enabled
ups.delay.shutdown: 20
ups.firmware: 950.e3 .D
ups.firmware.aux: e3     
ups.load: 16
ups.mfr: American Power Conversion
ups.mfr.date: 2019/12/03
ups.model: Back-UPS RS 1000MS
ups.productid: 0002
ups.realpower.nominal: 600
ups.serial: 3B1949X21182 
ups.status: OL CHRG
ups.test.result: No test initiated
ups.timer.reboot: 0
ups.timer.shutdown: -1
ups.vendorid: 051d

Clearly it sees it. I am using "monuser" as the monitor user name. I have the correct passwords entered. Anybody have any ideas?