( solved )Multicast flood "listener reportmax resp delay"

[jr-acedo]

Hello everyone, with the default firewall rule ff02::/16, there should be no problem for the firewall to accept ff02::1:ff00:1, I have locks every two minutes, I would have to update the card Drivers network ?, thanks

 block in on igc1: (class 0xe0, hlim 1, next-header Options (0) payload length: 32) fe80::2eb:d5ff:feed:2819 > ff02::1:ff00:1: HBH (rtalert: 0x0000) (padn) [icmp6 sum ok] ICMP6, multicast listener reportmax resp delay: 0 addr: ff02::1:ff00:1

igc0: <Intel(R) Ethernet Controller I226-V> mem 0x80800000-0x808fffff,0x80900000-0x80903fff at device 0.0 on pci2
igc0: EEPROM V2.17-0 eTrack 0x80000303
igc0: Using 1024 TX descriptors and 1024 RX descriptors
igc0: Using 4 RX queues 4 TX queues
igc0: Using MSI-X interrupts with 5 vectors
igc0: Ethernet address: xxxxxxxxxxxxx
igc0: netmap queues/slots: TX 4/1024, RX 4/1024

igc1: <Intel(R) Ethernet Controller I226-V> mem 0x80500000-0x805fffff,0x80600000-0x80603fff at device 0.0 on pci3
igc1: EEPROM V2.17-0 eTrack 0x80000303
igc1: Using 1024 TX descriptors and 1024 RX descriptors
igc1: Using 4 RX queues 4 TX queues
igc1: Using MSI-X interrupts with 5 vectors
igc1: Ethernet address: xxxxxxxxxxxxxx
igc1: netmap queues/slots: TX 4/1024, RX 4/1024

[jr-acedo]

going back to 24.7 solves the problem