Consistent Crashes/Panics with GPON-ONU-34-20BI

[craig]

I experienced one crash on 24.7 since installing my GPON-ONU-34-20BI from fs.com, but they're far more frequent on 25.1.

textdump.tar.0

Code Select Expand

ddb.txt06000014000014735515011  7074 ustarrootwheeldb:0:kdb.enter.default>  run lockinfo
db:1:lockinfo> show locks
No such command; use "help" to list available commands
db:1:lockinfo>  show alllocks
No such command; use "help" to list available commands
db:1:lockinfo>  show lockedvnods
Locked vnodes
db:0:kdb.enter.default>  show pcpu
cpuid        = 2
dynamic pcpu = 0xfffffe00b6a71080
curthread    = 0xfffff80001e78000: pid 7 tid 100165 critnest 1 "pf purge"
curpcb       = 0xfffff80001e78520
fpcurthread  = none
idlethread   = 0xfffff80001ae0740: tid 100005 "idle: cpu2"
self         = 0xffffffff82c12000
curpmap      = 0xffffffff81b81670
tssp         = 0xffffffff82c12384
rsp0         = 0xfffffe0103867000
kcr3         = 0xffffffffffffffff
ucr3         = 0xffffffffffffffff
scr3         = 0x0
gs32p        = 0xffffffff82c12404
ldt          = 0xffffffff82c12444
tss          = 0xffffffff82c12434
curvnet      = 0xfffff800012a8a80
db:0:kdb.enter.default>  bt
Tracing pid 7 tid 100165 td 0xfffff80001e78000
kdb_enter() at kdb_enter+0x33/frame 0xfffffe0103866c20
panic() at panic+0x43/frame 0xfffffe0103866c80
trap_fatal() at trap_fatal+0x40b/frame 0xfffffe0103866ce0
trap_pfault() at trap_pfault+0x46/frame 0xfffffe0103866d30
calltrap() at calltrap+0x8/frame 0xfffffe0103866d30
--- trap 0xc, rip = 0xffffffff8216ad9c, rsp = 0xfffffe0103866e00, rbp = 0xfffffe0103866e30 ---
pf_detach_state() at pf_detach_state+0x5fc/frame 0xfffffe0103866e30
pf_unlink_state() at pf_unlink_state+0x290/frame 0xfffffe0103866e70
pf_purge_expired_states() at pf_purge_expired_states+0x188/frame 0xfffffe0103866ec0
pf_purge_thread() at pf_purge_thread+0x13b/frame 0xfffffe0103866ef0
fork_exit() at fork_exit+0x7f/frame 0xfffffe0103866f30
fork_trampoline() at fork_trampoline+0xe/frame 0xfffffe0103866f30
--- trap 0, rip = 0, rsp = 0, rbp = 0 ---

[newsense]

Are you using the latest firmware on the GPON ?

[craig]

I believe so - I've had a search and I can't find any links to firmware or docs on how to update.

[Amodin]

Did you inquire about this on the 8311 Discord server?  They are pretty helpful over there too.

[franco]

The panic you show is from the unamended 24.7.10 kernel as far as I can tell. Maybe you have more than one, but I can only go by this piece you offered here.


Cheers,
Franco