UPNP Stops Responding After a Couple of Minutes

[dcrdev]

Did a fresh install of OPNSense on a new box yesterday and have been grappling with UPNP. I have it working, but it only works for a couple of minutes before not responding. I can restart the miniupnpd service and it will start responding again, but will ultimately stop responding.

Here's my config:

Code: [Select]

ext_ifname=pppoe0
port=2189
listening_ip=bridge0
ext_perform_stun=yes
ext_stun_host=stun.l.google.com
ext_stun_port=19302
secure_mode=yes
packet_log=yes
system_uptime=yes
presentation_url=https://10.210.1.1/
uuid=528c8e6c-4a3c-6598-999a-0e9df15ad32
serial=528C8E6C
model_number=24.7.9_1
allow 88-65535 10.210.1.230/32 88-65535
allow 88-65535 10.210.1.231/32 88-65535
allow 88-65535 10.210.1.48/32 88-65535
allow 88-65535 10.210.1.66/32 88-65535
deny 0-65535 0.0.0.0/0 0-65535
enable_upnp=yes
enable_pcp_pmp=yes
clean_ruleset_interval=600
min_lifetime=120
max_lifetime=86400
After a couple of minutes of miniupnpd being active:

Code: [Select]

dominic@Dominics-MacBook-Pro ~ % upnpc -s             
upnpc: miniupnpc library test client, version 2.2.8.
 (c) 2005-2024 Thomas Bernard.
More information at https://miniupnp.tuxfamily.org/ or http://miniupnp.free.fr/

List of UPNP devices found on the network :
 desc: http://10.210.1.20:80/description.xml
 st: urn:schemas-upnp-org:device:basic:1

 desc: http://10.210.1.20:80/description.xml
 st: uuid:2f402f80-da50-11e1-9b23-ecb5fa24d6cf

 desc: http://10.210.1.20:80/description.xml
 st: upnp:rootdevice

UPnP device found. Is it an IGD ? : http://10.210.1.20:80/
No valid UPNP Internet Gateway Device found.
After a restart of the service:

Code: [Select]

dominic@Dominics-MacBook-Pro ~ % upnpc -s
upnpc: miniupnpc library test client, version 2.2.8.
 (c) 2005-2024 Thomas Bernard.
More information at https://miniupnp.tuxfamily.org/ or http://miniupnp.free.fr/

List of UPNP devices found on the network :
 desc: http://10.210.1.20:80/description.xml
 st: urn:schemas-upnp-org:device:basic:1

 desc: http://10.210.1.20:80/description.xml
 st: uuid:2f402f80-da50-11e1-9b23-ecb5fa24d6cf

 desc: http://10.210.1.20:80/description.xml
 st: upnp:rootdevice

 desc: http://10.210.1.1:2189/rootDesc.xml
 st: urn:schemas-upnp-org:device:InternetGatewayDevice:1

Found valid IGD : http://10.210.1.1:2189/ctl/IPConn
Local LAN ip address : 10.210.1.231
Connection Type : IP_Routed
Status : Connected, uptime=3211s, LastConnectionError : ERROR_NONE
  Time started : Sun Dec  1 22:35:43 2024
MaxBitRateDown : 64000 bps (64 Kbps)   MaxBitRateUp 64000 bps (64 Kbps)
ExternalIPAddress = REDACTED
Bytes:   Sent:  8211684 Recv: 167733177
Packets: Sent:    45845 Recv:   139374
I'm not seeing any blocks in the logs, in fact I only see upnp requests prior to the service not responding. I am not sure what could be happening here. Looks like other people may be experiencing the same (not many): https://redmine.pfsense.org/issues/15732

Help please 

[dcrdev]

Turned out to be a Phillips Hue bridge which runs an UPNP server (for reasons?) - it would seem if the firewall comes up after the bridge is powered on these issues occur, but if the firewall comes up before it seems to be stable.