Mellanox Connectx3 QSFP+

[cl34980980]

Hello,
First im a total Beginner. I did build a box, installed opnsense, working fine.
For a network card i chose a connectx3. It has 2 QSFP+ Ports. I wanted to connect to my Mikrotik switch via AOC Cable. I cant get it to link up.
DAC to a second Server with Connectx3 is working. SFP+ Coper and Fiber 10gbe is working. 1g copper is working. All cabels are connecting the second server with TrueNas and connectx3 without a problem.

I got no clue how to continue. I thing it must be opnsense.

root@Router:~ # ifconfig -vvm mlxen0
mlxen0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
        description: WAN (wan)
        options=8c00a8<VLAN_MTU,JUMBO_MTU,VLAN_HWCSUM,VLAN_HWTSO,LINKSTATE,HWSTATS>
        capabilities=ed07bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4,TSO6,LRO,VLAN_HWFILTER,VLAN_HWTSO,LINKSTATE,RXCSUM_IPV6,TXCSUM_IPV6,HWSTATS>
        ether f4:52:14:54:a1:e1
        inet6 fe80::f652:14ff:fe54:a1e1%mlxen0 prefixlen 64 scopeid 0x5
        media: Ethernet autoselect
        status: no carrier
        supported media:
                media autoselect
                media 40Gbase-CR4 mediaopt full-duplex
                media 10Gbase-CX4 mediaopt full-duplex
                media 10Gbase-SR mediaopt full-duplex
                media 1000baseT mediaopt full-duplex
        nd6 options=23<PERFORMNUD,ACCEPT_RTADV,AUTO_LINKLOCAL>
        drivername: mlxen0

root@Router:~ # /usr/bin/mst status -v
PCI devices:
------------
DEVICE_TYPE             MST                           PCI       RDMA            NET
NUMA
ConnectX3(rev:1)        pci0:1:0:0                    01:00.0

root@Router:~ # /usr/bin/flint_ext -d pci0:1:0:0 q
Image type:            FS2
FW Version:            2.42.5000
FW Release Date:       5.9.2017
Product Version:       02.42.50.00
Device ID:             4099
Description:           Node             Port1            Port2            Sys image
GUIDs:                 f45214030054a1e0 f45214030054a1e1 f45214030054a1e2 f45214030054a1e3
MACs:                                       f4521454a1e1     f4521454a1e2
VSD:
PSID:                  MT_1090110018

Maybe someone can point me in the right dirrection...

[FraLem]

Hi,
I would suggest to try fixing the media to the right speed of the interface.
Regards

[cl34980980]

Solved .... Reflashed the firmware and now it is working ..