Repeated Reboots - Please Help

[madar2356]

Can anyone please assist; I've tried 24.7 and 24.1 but still no luck; have OPNSense on Proxmox.

Features2=0x82b82201<SSE3,SSSE3,CX16,SSE4.1,SSE4.2,x2APIC,POPCNT,AESNI,HV>
  AMD Features=0x20100800<SYSCALL,NX,LM>
  AMD Features2=0x3<LAHF,CMP>
Hypervisor: Origin = "KVMKVMKVM"
real memory  = 12884901888 (12288 MB)
avail memory = 12447125504 (11870 MB)
Event timer "LAPIC" quality 100
ACPI APIC Table: <BOCHS  BXPC    >
FreeBSD/SMP: Multiprocessor System Detected: 6 CPUs
FreeBSD/SMP: 1 package(s) x 6 core(s)
random: unblocking device.
ioapic0 <Version 1.1> irqs 0-23
Launching APs: 2 5 4 1 3
wlan: mac acl policy registered
random: entropy device external interface
kbd1 at kbdmux0
WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0.
vtvga0: <VT VGA driver>
kvmclock0: <KVM paravirtual clock>
Timecounter "kvmclock" frequency 1000000000 Hz quality 975
kvmclock0: registered as a time-of-day clock, resolution 0.000001s
smbios0: <System Management BIOS> at iomem 0xf5260-0xf527e
smbios0: Version: 2.8, BCD Revision: 2.8
aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS>
acpi0: <BOCHS BXPC>
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 100000000 Hz quality 950
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x608-0x60b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pcib0: could not evaluate _ADR - AE_NOT_FOUND
pci0: <ACPI PCI bus> on pcib0
isab0: <PCI-ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX3 WDMA2 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf0e0-0xf0ef at device 1.1 on pci0
ata0: <ATA channel> at channel 0 on atapci0
ata1: <ATA channel> at channel 1 on atapci0
uhci0: <Intel 82371SB (PIIX3) USB controller> port 0xf040-0xf05f irq 11 at device 1.2 on pci0
usbus0 on uhci0
usbus0: 12Mbps Full Speed USB v1.0
pci0: <bridge> at device 1.3 (no driver attached)
vgapci0: <VGA-compatible display> mem 0xfd000000-0xfdffffff,0xfeb10000-0xfeb10fff at device 2.0 on pci0
vgapci0: Boot video device
virtio_pci0: <VirtIO PCI (legacy) Balloon adapter> port 0xf000-0xf03f mem 0xc0a0000000-0xc0a0003fff irq 11 at device 3.0 on pci0
vtballoon0: <VirtIO Balloon Adapter> on virtio_pci0
pcib1: <ACPI PCI-PCI bridge> mem 0xc000000000-0xc0000000ff irq 10 at device 5.0 on pci0
pci1: <ACPI PCI bus> on pcib1
virtio_pci1: <VirtIO PCI (legacy) SCSI adapter> port 0xe000-0xe03f mem 0xfe800000-0xfe800fff,0xc080000000-0xc080003fff irq 10 at device 1.0 on pci1
vtscsi0: <VirtIO SCSI Adapter> on virtio_pci1
virtio_pci2: <VirtIO PCI (legacy) Network adapter> port 0xf060-0xf07f mem 0xfeb11000-0xfeb11fff,0xc0a0004000-0xc0a0007fff irq 10 at device 18.0 on pci0
vtnet0: <VirtIO Networking Adapter> on virtio_pci2
vtnet0: Ethernet address: bc:24:11:00:2f:f4
vtnet0: netmap queues/slots: TX 1/256, RX 1/512
000.000765 [ 449] vtnet_netmap_attach       vtnet attached txq=1, txd=256 rxq=1, rxd=512
virtio_pci3: <VirtIO PCI (legacy) Network adapter> port 0xf080-0xf09f mem 0xfeb12000-0xfeb12fff,0xc0a0008000-0xc0a000bfff irq 11 at device 19.0 on pci0
vtnet1: <VirtIO Networking Adapter> on virtio_pci3
vtnet1: Ethernet address: bc:24:11:3d:0e:98
vtnet1: netmap queues/slots: TX 1/256, RX 1/512
000.000766 [ 449] vtnet_netmap_attach       vtnet attached txq=1, txd=256 rxq=1, rxd=512
virtio_pci4: <VirtIO PCI (legacy) Network adapter> port 0xf0a0-0xf0bf mem 0xfeb13000-0xfeb13fff,0xc0a000c000-0xc0a000ffff irq 11 at device 20.0 on pci0
vtnet2: <VirtIO Networking Adapter> on virtio_pci4
vtnet2: Ethernet address: bc:24:11:7e:de:a1
vtnet2: netmap queues/slots: TX 1/256, RX 1/512
000.000767 [ 449] vtnet_netmap_attach       vtnet attached txq=1, txd=256 rxq=1, rxd=512
virtio_pci5: <VirtIO PCI (legacy) Network adapter> port 0xf0c0-0xf0df mem 0xfeb14000-0xfeb14fff,0xc0a0010000-0xc0a0013fff irq 10 at device 21.0 on pci0
vtnet3: <VirtIO Networking Adapter> on virtio_pci5
vtnet3: Ethernet address: bc:24:11:e4:e6:b2
vtnet3: netmap queues/slots: TX 1/256, RX 1/512
000.000768 [ 449] vtnet_netmap_attach       vtnet attached txq=1, txd=256 rxq=1, rxd=512
pcib2: <ACPI PCI-PCI bridge> mem 0xc000001000-0xc0000010ff irq 10 at device 30.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> mem 0xc000002000-0xc0000020ff irq 11 at device 31.0 on pci0
pci3: <ACPI PCI bus> on pcib3
acpi_syscontainer0: <System Container> on acpi0
vmgenc0: <VM Generation Counter> on acpi0
acpi_syscontainer1: <System Container> port 0xaf00-0xaf0b on acpi0
acpi_syscontainer2: <System Container> port 0xafe0-0xafe3 on acpi0
acpi_syscontainer3: <System Container> port 0xae00-0xae17 on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
WARNING: Device "psm" is Giant locked and may be deleted before FreeBSD 14.0.
psm0: model IntelliMouse Explorer, device ID 4
fdc0: <floppy drive controller (FDE)> port 0x3f2-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: does not respond
device_attach: fdc0 attach returned 6
orm0: <ISA Option ROM> at iomem 0xe7800-0xeffff pnpid ORM0000 on isa0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff pnpid PNP0900 on isa0
attimer0: <AT timer> at port 0x40 on isa0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
fdc0: No FDOUT register!
Timecounters tick every 10.000 msec
Trying to mount root from ufs:/dev/gpt/rootfs [rw]...
ugen0.1: <Intel UHCI root HUB> at usbus0
uhub0 on usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
da0 at vtscsi0 bus 0 scbus2 target 0 lun 0
da0: <QEMU QEMU HARDDISK 2.5+> Fixed Direct Access SPC-3 SCSI device
da0: 300.000MB/s transfers
da0: Command Queueing enabled
da0: 65536MB (134217728 512 byte sectors)
cd0 at ata1 bus 0 scbus1 target 0 lun 0
cd0: <QEMU QEMU DVD-ROM 2.5+> Removable CD-ROM SCSI device
cd0: Serial Number QM00003
cd0: 16.700MB/s transfers (WDMA2, ATAPI 12bytes, PIO 65534bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present
uhub0: 2 ports with 2 removable, self powered
ugen0.2: <QEMU QEMU USB Tablet> at usbus0
intsmb0: <Intel PIIX4 SMBUS Interface> irq 9 at device 1.3 on pci0
intsmb0: intr IRQ 9 enabled revision 0
smbus0: <System Management Bus> on intsmb0
uhid0 on uhub0
uhid0: <QEMU QEMU USB Tablet, class 0/0, rev 2.00/0.00, addr 2> on usbus0
lo0: link state changed to UP
pflog0: permanently promiscuous mode enabled
vtnet0: link state changed to UP
vtnet1: link state changed to UP
Waiting (max 60 seconds) for system process `vnlru' to stop... done
Waiting (max 60 seconds) for system process `syncer' to stop...
Syncing disks, vnodes remaining... 1 0 0 0 done
All buffers synced.
Uptime: 2m28s
uhid0: detached
uhub0: detached
Rebooting...
cpu_reset: Stopping other CPUs