Author Topic: RDP Port (Read 9015 times)

Julien · « **on:** January 10, 2017, 04:16:10 pm »

Hi Guys,
in one of our Customer using OPNsense in Production between a Different Gateway which we are trying to get off soon.
the LAN side of Currently Gateway is 192.168.20.0/24
the Opnsense WAN is 192.168.20.20
LAN is 20.2.2.0/24

i want to access server 20.2.2.20 using RDP from the LAN 192.168.20.0/24
i've NAT the port MS RDP to 20.2.2.20 and the RDP did not work. so I've deleted the NAT and created a port forwarding and it's neither did not works.
can Someone tell me what I did wrong on this ? or is this a build issue ?

thank you

Julien · « **Reply #1 on:** January 11, 2017, 08:28:39 pm »

I have tried it with old build and it works .
Maybe it's a bug ?

Julien · « **Reply #2 on:** January 11, 2017, 10:35:39 pm »

Hi Guys,
please ignore this as I managed to get it working.
i confirm its not a bug but a miss configuration.
had to reboot the firewall to get the rules working.
thank you for your continue support guys

weust · « **Reply #3 on:** January 12, 2017, 10:14:01 pm »

Rebooting to get rules working is not normal?

will · « **Reply #4 on:** January 13, 2017, 01:19:21 pm »

No it's not, but flushing the state table after making NAT changes is sometimes required and if the OP didn't do that then rebooting the firewall would have had the same effect.

weust · « **Reply #5 on:** January 13, 2017, 07:33:54 pm »

I thought that was done when applying.
But nevertheless, I get it.

Author Topic: RDP Port (Read 9015 times)

Julien

RDP Port

Julien

Re: RDP Port

Julien

Re: RDP Port

weust

Re: RDP Port

will

Re: RDP Port

weust

Re: RDP Port