Gateways offline after reboot (re-apply setting brings them back)

Started by Mks, June 16, 2024, 05:55:18 PM

Previous topic - Next topic
Hi all,

I face a strange issue since a couple of month.
Now I did a clean installl on new hardware (import of config) but the issue still exists.

After every reboot (and sometimes after a couple of weeks) the gateway goes offline and therefore internet connectivity is lost. All local systems etc. are running without any issue when this issue happens.

Gateway (System: Gateways: Single) is up and running and also within System: Routes: Status the default route is listed.

What I do to solve the issue until the next reboot (or when the issue occurs) is to hit the "Save" (may than the config is re-applied) button within the settings of the gateway (System: Gateways: Single).
Seconds after that internet connectivity is back.

Any idea how to solve or analyze the issue, I found some similar posts from the past but no solution.
Beside that everything works fine.

br

Maybe a silly question,

But are your GWs assigned to the correct interface?

Regards,
S.
Networking is love. You may hate it, but in the end, you always come back to it.

OPNSense HW
APU2D2 - deceased
N5105 - i226-V | Patriot 2x8G 3200 DDR4 | L 790 512G - VM HA(SOON)
N100   - i226-V | Crucial 16G  4800 DDR5 | S 980 500G - PROD

Hi,

yes they are.

After pushing the "Save" button (without changing anything) within the settings of the gateway (System: Gateways: Single) it works.

br

I'm dealing with this issue as well, would appreciate some help!

Hi,

I already mentioned the issue here https://forum.opnsense.org/index.php?topic=36688.

Now I migrated to a new hardware with fresh install and the most recent version of opnsense but the issue still exists, so I started this thread.

Any help, hints, ... highly appreciated.

Thanks