Audit / connectivity IPV6 problem

« previous next »

Print

Pages: [1]

Author Topic: Audit / connectivity IPV6 problem (Read 566 times)

odites999

Newbie
Posts: 35
Karma: 4

Audit / connectivity IPV6 problem

« on: April 02, 2024, 07:06:57 pm »

When I run audit connectivity test, the first time I run the test, IPV4 success is 100% and IPV6 is 75% (4 packets transmitted, 3 packets received, 25.0% packet loss). If I repeat the test, both results are 100% success.

Really there's no problem in any connectivy but it's a bit strange.

Greetings

Logged

Saarbremer

Sr. Member
Posts: 353
Karma: 14

Re: Audit / connectivity IPV6 problem

« Reply #1 on: April 03, 2024, 10:34:27 am »

Well, did you check with your ISP/connection?

That reminded me on some automatic dial-up back in the early 2000s that would be triggered by the first packet to go out.

Logged

odites999

Newbie
Posts: 35
Karma: 4

Re: Audit / connectivity IPV6 problem

« Reply #2 on: April 03, 2024, 06:43:40 pm »

I don't know exactly what you mean with my ISP/connection... but i have tried pinging to many ipv6 sites without any problem. It just happens with the connectivity audit when it has been some time "resting". If I retry inmediately after the failed test, everything is OK.

Greetings

Logged

ProximusAl

Full Member
Posts: 111
Karma: 15

Re: Audit / connectivity IPV6 problem

« Reply #3 on: April 03, 2024, 09:47:20 pm »

I get the same issue on the IPv6 test. My IPv6 is via a WireGuard tunnel, but other than that test…works perfect.

Logged

Print

Pages: [1]

« previous next »