[Solved] Problems after Update on 16.7.6

[Andreas]

My Firewall isnt starting up

Searching bootorder for: /rom@genroms/pxe.rom

Press ESC for boot menu.

Searching bootorder for: HALT
drive 0x000f3280: PCHS=16383/16/63 translation=lba LCHS=1024/255/63 s=250069680
Space available for UMB: c1000-ee800, f0000-f3280
Returned 253952 bytes of ZoneHigh
e820 map has 7 items:
  0: 0000000000000000 - 000000000009fc00 = 1 RAM
  1: 000000000009fc00 - 00000000000a0000 = 2 RESERVED
  2: 00000000000f0000 - 0000000000100000 = 2 RESERVED
  3: 0000000000100000 - 00000000df175000 = 1 RAM
  4: 00000000df175000 - 00000000e0000000 = 2 RESERVED
  5: 00000000f8000000 - 00000000fc000000 = 2 RESERVED
  6: 0000000100000000 - 0000000120000000 = 1 RAM
enter handle_19:
  NULL
Booting from Hard Disk...
Booting from 0000:7c00
SeaBIOS (version rel-1.9.0.0-deciso-netboard-a10)
BUILD: gcc: (coreboot toolchain v1.33 November 25th, 2015) 5.2.0 binutils: (GNU Binutils) 2.25
Found mainboard Deciso Netboard A10
Relocating init from 0x000eb200 to 0xdf12ec20 (size 33600)
Found CBFS header at 0xffc00138
multiboot: eax=0, ebx=0
boot order:
1: /pci@i0cf8/*@14,7
2: /pci@i0cf8/*@11/drive@0/disk@0
3: /pci@i0cf8/*@11/drive@1/disk@0
4: /pci@i0cf8/usb@12,2/usb-*@2
5: /pci@i0cf8/usb@13,2/usb-*@1
6: /pci@i0cf8/usb@12,2/usb-*@1
7: HALT
Found 27 PCI devices (max PCI bus is 04)
Copying SMBIOS entry point from 0xdf17f000 to 0x000f3520
Copying ACPI RSDP from 0xdf190000 to 0x000f34f0
Copying MPTABLE from 0xdf1b4000/df1b4010 to 0x000f3320
Copying PIR from 0xdf1b5000 to 0x000f32f0
Using pmtimer, ioport 0x818
Scan for VGA option rom
EHCI init on dev 00:12.2 (regs=0xf7f08020)
Found 3 serial ports
AHCI controller at 11.0, iobase f7f07000, irq 0
EHCI init on dev 00:13.2 (regs=0xf7f09020)
EHCI init on dev 00:16.2 (regs=0xf7f0b020)
Searching bootorder for: /pci@i0cf8/*@14,7
Searching bootorder for: /pci@i0cf8/*@11/drive@0/disk@0
OHCI init on dev 00:12.0 (regs=0xf7f04000)
Searching bootorder for: /rom@img/memtest
AHCI/0: registering: "AHCI/0: TS128GSSD370 ATA-9 Hard-Disk (119 GiBytes)"
OHCI init on dev 00:13.0 (regs=0xf7f05000)
OHCI init on dev 00:16.0 (regs=0xf7f06000)
All threads complete.
Scan for option roms
Running option rom at c000:0003
pmm call arg1=1
pmm call arg1=0
pmm call arg1=1
pmm call arg1=0
Searching bootorder for: /rom@genroms/pxe.rom

Press ESC for boot menu.

Select boot device:

1. AHCI/0: TS128GSSD370 ATA-9 Hard-Disk (119 GiBytes)
2. iPXE (PCI 00:00.0)
3. Payload [memtest]

Searching bootorder for: HALT
drive 0x000f3280: PCHS=16383/16/63 translation=lba LCHS=1024/255/63 s=250069680
Space available for UMB: c1000-ee800, f0000-f3280
Returned 253952 bytes of ZoneHigh
e820 map has 7 items:
  0: 0000000000000000 - 000000000009fc00 = 1 RAM
  1: 000000000009fc00 - 00000000000a0000 = 2 RESERVED
  2: 00000000000f0000 - 0000000000100000 = 2 RESERVED
  3: 0000000000100000 - 00000000df175000 = 1 RAM
  4: 00000000df175000 - 00000000e0000000 = 2 RESERVED
  5: 00000000f8000000 - 00000000fc000000 = 2 RESERVED
  6: 0000000100000000 - 0000000120000000 = 1 RAM
enter handle_19:
  NULL
Booting from Hard Disk...
Booting from 0000:7c00

just what i get on console in front of the deciso board

[franco]

Which version did you upgrade from and to?

[Andreas]

16.7.5 to 16.7.6

[franco]

Ok, strange. There is no base system or kernel switch in this update so it shouldn't reboot. Did you issue the reboot?

[Andreas]

The system itself anounced a restart and did it...
afterwards the result is like i posted

[jschellevis]

Doesn't look like anything related to OPNsense.
Just upgraded similar system without any issue at all.

My best guess it that you have disabled serial.
You can wait a while and see if the unit is responsive on LAN and access the GUI if it is, and then re-enable serial.

If all fails you can reinstall using USB too.

-Jos

[Andreas]

im waiting about 1h now... nothing happened since this moment i made this screenshot from the serial console

[franco]

Is the fan running? Do you see link-up LEDs on the network ports glowing?

[Andreas]

yes looks all normal

[franco]

it sounds like the box reverted to a standard configuration, LAN on em0 as 192.168.1.1 with DHCP running. Plug a laptop to see.

[Andreas]

nope
tested no connection possible

[jschellevis]

Hi Andreas,

Not sure what the issue might be, guess best thing is to reinstall using a USB stick and restore your config.
Normally upgrading from 16.7.5 to 16.7.6 doesn't require a reboot.

Perhaps you have a disk issue, maybe the drive is full?

Also booting from a USB drive and mounting your disk partition may provide some insight on what the issue is.

Jos

[Andreas]

Hopefully i can get the old config :(

[jschellevis]

If you mount the drive you should be able to find the previous backups under /conf/backup

[Andreas]

reinstalled and its running
thx to this good installer

@franco i sent you an email with some more information- perhaps you can have a look at