bxe0: ERROR: Invalid SHMEM Validity signature: 0x0000008bxe0: ERROR: Invalid phy config in NVRAM (PHY1=0x0000008 PHY2=0x0000008)bxe0: Uknown mediabxe0: IFMEDIA flags: 20bxe0: using defaults for TSO: 65518/35/2048bxeo: ERROR FW failed to respond!bxe0: ERROR MCP response failure, abortingbxe0: ERROR Failed to unload previous driver! time_counter 10 rc -1
if I were you, I'd verify that firmware on the card is as it should be by booting it onto a vanilla freebsd of the same OPN version and on a linux one.Cases like these can be down to corrupted or wrong firmware like a bad crssflash. Booting to other OS can help verify in a non-destructive way.
Quote from: cookiemonster on December 27, 2023, 02:08:48 pmif I were you, I'd verify that firmware on the card is as it should be by booting it onto a vanilla freebsd of the same OPN version and on a linux one.Cases like these can be down to corrupted or wrong firmware like a bad crssflash. Booting to other OS can help verify in a non-destructive way.Thats actually helpful, im going to try this this weekend, thnx
Quote from: thecrankygamer on January 05, 2024, 06:32:39 pmQuote from: cookiemonster on December 27, 2023, 02:08:48 pmif I were you, I'd verify that firmware on the card is as it should be by booting it onto a vanilla freebsd of the same OPN version and on a linux one.Cases like these can be down to corrupted or wrong firmware like a bad crssflash. Booting to other OS can help verify in a non-destructive way.Thats actually helpful, im going to try this this weekend, thnxHi, did you find a solution? I have the same exact output from dmesg on opnsense.
I cant even get it to work when using vmxnet, so i think the 10gb card has a bad firmware, or, is just broken
bxe0: <QLogic NetXtreme II BCM57840 4x10GbE (B1) BXE v:1.78.91> mem 0x380000000000-0x3800007fffff,0x380000800000-0x380000ffffff,0x380002000000-0x38000200ffff irq 11 at device 8.0 on pci0bxe0: PCI BAR0 [10] memory allocated: 0x380000000000-0x3800007fffff (8388608) -> 0xfffffe008d400000bxe0: PCI BAR2 [18] memory allocated: 0x380000800000-0x380000ffffff (8388608) -> 0xfffffe008dc00000bxe0: PCI BAR4 [20] memory allocated: 0x380002000000-0x38000200ffff (65536) -> 0xfffffe0084678000bxe0: Found 10Gb Fiber media.bxe0: IFMEDIA flags : 20bxe0: Using defaults for TSO: 65518/35/2048bxe0: Ethernet address: d4:5d:64:09:0b:6abxe0: MSI-X vectors Requested 2 and Allocated 2bxe1: <QLogic NetXtreme II BCM57840 4x10GbE (B1) BXE v:1.78.91> mem 0x380001000000-0x3800017fffff,0x380001800000-0x380001ffffff,0x380002010000-0x38000201ffff irq 10 at device 9.0 on pci0bxe1: PCI BAR0 [10] memory allocated: 0x380001000000-0x3800017fffff (8388608) -> 0xfffffe008e800000bxe1: PCI BAR2 [18] memory allocated: 0x380001800000-0x380001ffffff (8388608) -> 0xfffffe008f000000bxe1: PCI BAR4 [20] memory allocated: 0x380002010000-0x38000201ffff (65536) -> 0xfffffe0084688000bxe1: ERROR: Invalid SHMEM validity signature: 0x00010008bxe1: ERROR: Invalid phy config in NVRAM (PHY1=0x00010008 PHY2=0x00010008)bxe1: Unknown media!bxe1: IFMEDIA flags : 20bxe1: Using defaults for TSO: 65518/35/2048bxe1: ERROR: FW failed to respond!bxe1: ERROR: MCP response failure, abortingbxe1: ERROR: Failed to unload previous driver! time_counter 10 rc -1acpi_syscontainer0: <System Container> on acpi0acpi_syscontainer1: <System Container> port 0xaf00-0xaf0b on acpi0acpi_syscontainer2: <System Container> port 0xafe0-0xafe3 on acpi0acpi_syscontainer3: <System Container> port 0xae00-0xae17 on acpi0