S2S tunnel established - there goes no traffic through the tunnel

[Rac00n]

Hi there,

I've followed the following guide: https://docs.opnsense.org/manual/how-tos/ipsec-s2s.html

Only differences:
Site A:
WAN: 172.16.11.1
LAN: 192.168.1.0/24

Tunnel-Settings Phase 2:
Mode: Tunnel IPv4
Local Network: LAN Subnet
Remote Network: 192.168.2.0/24

Firewall Rules: Every interface allows every incoming and outgoing packets

Site B
WAN: 172.16.11.2
LAN: 192.168.2.0/24

Tunnel-Settings Phase 2:
Mode: Tunnel IPv4
Local Network: LAN Subnet
Remote Network: 192.168.1.0/24

Firewall Rules: Every interface allows every incoming and outgoing packets

The tunnel is established. But there goes no traffic through the tunnel.
I can ping the LAN's interface 192.168.1.1 and 192.168.2.1 but I can't reach the whole subnet.
And if I ping 192.168.1.1 and 192.168.2.1, it doesn't goes through the tunnel.

Thank you for your help in advance

[Rac00n]

I really don't know why it is working now.
But i had restarted the vpn and it seems working now.
The "time" column  under VPN -> IPSec -> Status Overview had been increasing when i pinged the subnet.

Edit: I even am able to ping the whole subnet of each site now