Home
Help
Search
Login
Register
OPNsense Forum
»
Archive
»
23.7 Legacy Series
»
Configure network interfaces when running virtualized/emulated in UTM macOS
« previous
next »
Print
Pages: [
1
]
Author
Topic: Configure network interfaces when running virtualized/emulated in UTM macOS (Read 982 times)
logi
Jr. Member
Posts: 67
Karma: 2
Configure network interfaces when running virtualized/emulated in UTM macOS
«
on:
October 26, 2023, 02:42:44 am »
I am installing OPNsense on an M1 Macbook, because the Mac uses ARM (Apple Silicon), I am using the App UTM to virtualize and emulate an x86 CPU.
I followed this guide (link below) and successfully configured OpenWRT on the same platform, the only difference is that I don't have to emulate because there are ARM binaries for OpenWRT.
https://openwrt.org/docs/guide-user/virtualization/utm
I tried to follow a similar approach to configure the Network interfaces (two network cards), I am installing it with two NICs, one for the WAN and one for the LAN, unfortunately that configuration didn't work, any assistance/guidance you can provide will be appreciated.
NOTE: All the emulated hardware (CPU, NICs, etc.) is fully recognized and configured by OPNsense.
Logged
Maurice
Hero Member
Posts: 1213
Karma: 158
Re: Configure network interfaces when running virtualized/emulated in UTM macOS
«
Reply #1 on:
October 30, 2023, 12:45:51 am »
While there are no official OPNsense images for AMD64 (aarch64), you can build your own or download an unofficial one. Check the links in my signature. I don't have a Mac, but since UTM is based on QEMU, I'm pretty confident this should work.
Cheers
Maurice
Logged
OPNsense virtual machine images
OPNsense aarch64 firmware repository
Commercial support & engineering available. PM for details (en / de).
Print
Pages: [
1
]
« previous
next »
OPNsense Forum
»
Archive
»
23.7 Legacy Series
»
Configure network interfaces when running virtualized/emulated in UTM macOS