Installing Zenarmor fails

[almodovaris]

Installing Zenarmor 1.15.1 failed on two different machines. Solution? Try until it succeeds (it may require up to 30 times). It got stuck at computing machine suitability for Zenarmor (computing CPU score and RAM size). The message was network error or network access broken. And it is true that sometimes the http daemon (i.e. the GUI) died on those machines. I don't know what caused it, it no longer seems to happen.

Hardware: Minisforum UN100C (Venus series) 16 GB RAM and 512 GB SSD.

[IHK]

Hi Almodovaris,

Thanks for your feedback and letting us know about the issue.
We couldn't reproduce the case.

Could you please share log and config files by clicking on the Send Feedback link at the bottom left of the window?

https://www.zenarmor.com/docs/support/reporting-bug#as-of-v114

[almodovaris]

Done.

If it matters, it has Realtek Ethernet adapters (only two) and the plugin with the Realtek driver was already installed beforehand.

Receive Side Scaling is enabled.

[almodovaris]

Lol, it was in the installation phase, so it wasn't even logged.

[IHK]

Hi Almodovaris,

Has this problem occurred again? If there is an update about the problem, I would ask you to share it.

Best regards

[almodovaris]

I have only installed it on two Venus series miniPCs with OPNsense. So, I did not try other Zenarmor installations on OPNsense.

On the same Venus series device it installed without any problem on Debian 12.2.

[almodovaris]

I mean, in the past I have installed it many times upon APU2 devices, but that was by and large unproblematic.

[almodovaris]

Yesterday it failed again on a Venus series device.

Solved it with:

# nano /usr/local/opnsense/scripts/OPNsense/Zenarmor/check_hardware.sh

Changed to CPU_PROPER=true in line 8 of the file.

In case one wonders, CPU score is 822618.