NIC Temperature Monitoring?

[Sinister Pisces]

Hello,
Is there a supported way to read the temperature sensor on a NIC? On a Linux system, I'd use the sensors command, but that doesn't seem to be available via the plugins repo.
Am I missing something obvious?

[Patrick M. Hausen]

ipmitool sensors

[Sinister Pisces]

Thanks!
That doesn't seem to have worked, though.
% ipmitool sensors
Could not open device at /dev/ipmi0 or /dev/ipmi/0 or /dev/ipmidev/0: No such file or directory

[cookiemonster]

I don't think you can use ipmitool unless your board has a management controller i.e. a bmc
As to what to use instead, I don't know of a utility that will read those temps unless they're exposed by the vendor. Happy to be corrected though.

[Patrick M. Hausen]

Thanks!
That doesn't seem to have worked, though.
% ipmitool sensors
Could not open device at /dev/ipmi0 or /dev/ipmi/0 or /dev/ipmidev/0: No such file or directory

kldload ipmi

first?

[gunnarf]

Is ipmitools in plugins? I can't find it

[Patrick M. Hausen]

Seems it is replaced - or always was - by FreeIPMI:

Code: [Select]

root@opnsense:~ # ipmi-sensors
Caching SDR repository information: /root/.freeipmi/sdr-cache/sdr-cache-opnsense.localhost
Caching SDR record 29 of 29 (current record ID 1880)
ID   | Name            | Type              | Reading    | Units | Event
4    | CPU Temp        | Temperature       | 55.00      | C     | 'OK'
71   | System Temp     | Temperature       | 59.00      | C     | 'OK'
138  | Peripheral Temp | Temperature       | 47.00      | C     | 'OK'
205  | DIMMA1 Temp     | Temperature       | 46.00      | C     | 'OK'
272  | DIMMA2 Temp     | Temperature       | N/A        | C     | N/A
339  | DIMMB1 Temp     | Temperature       | 47.00      | C     | 'OK'
406  | DIMMB2 Temp     | Temperature       | N/A        | C     | N/A
473  | FAN1            | Fan               | 3200.00    | RPM   | 'OK'
540  | FAN2            | Fan               | 3100.00    | RPM   | 'OK'
607  | FAN3            | Fan               | 3200.00    | RPM   | 'OK'
674  | FANA            | Fan               | N/A        | RPM   | N/A
741  | 12V             | Voltage           | 12.19      | V     | 'OK'
808  | 5VCC            | Voltage           | 5.03       | V     | 'OK'
875  | 3.3VCC          | Voltage           | 3.33       | V     | 'OK'
942  | VBAT            | Voltage           | 3.18       | V     | 'OK'
1009 | Vcpu            | Voltage           | 0.72       | V     | 'OK'
1076 | VDIMM           | Voltage           | 1.23       | V     | 'OK'
1143 | PVCCSRAM        | Voltage           | 1.02       | V     | 'OK'
1210 | P1V05_A         | Voltage           | 1.06       | V     | 'OK'
1277 | 5VSB            | Voltage           | 4.95       | V     | 'OK'
1344 | 3.3VSB          | Voltage           | 3.32       | V     | 'OK'
1411 | PVNN            | Voltage           | 0.83       | V     | 'OK'
1478 | PVPP            | Voltage           | 2.70       | V     | 'OK'
1545 | P1V538_A        | Voltage           | 1.55       | V     | 'OK'
1612 | 1.2V BMC        | Voltage           | 1.22       | V     | 'OK'
1679 | PVCC_REF        | Voltage           | 1.27       | V     | 'OK'
1746 | Chassis Intru   | Physical Security | N/A        | N/A   | 'OK'


[gunnarf]

Seems it is replaced - or always was - by FreeIPMI:

Code: [Select]

root@opnsense:~ # ipmi-sensors


  I don't seem to find that either. Sorry!

[Patrick M. Hausen]

pkg install freeipmi?