Boot delay for WAN for slow modem calling in

[FarmView]

Boot delay for WAN for slow modem calling in

when my modem lose power slow modem calling in my router is full booted and no internet
I either need to wait for modem calling in and then boot router or release then renew WAN
in order to get internet.

is thare a fix for this?

[scream]

May this is a similar issue I have too: https://forum.opnsense.org/index.php?topic=35707.0

[Maurice]

release then renew WAN

Is that because your modem assigns a private address if it has no upstream connection? Cable modems typically do that (192.168.100.1 is their standardized IPv4 address).

That's exactly what the "Reject Leases From" feature is for (in the WAN interface's DHCP client configuration).

Cheers
Maurice

[slackadelic]

release then renew WAN

Is that because your modem assigns a private address if it has no upstream connection? Cable modems typically do that (192.168.100.1 is their standardized IPv4 address).

That's exactly what the "Reject Leases From" feature is for (in the WAN interface's DHCP client configuration).

Cheers
Maurice

This is exactly what my modem does, so I set it to reject those leases.  Works like a charm until the cable modem is back up and functioning.