No update possible to 23.7.2

[newsense]

After  importing  the config check or updates, wait for it to finish and reboot. The existing plugins will be reinstalled and after reboot it should all come up as expected.

You still need to check the smart data on the ssd, it's unclear if you only had a corrupted FS or those are signs of the SSD being on its last leg.

[eszett]

Thank you for taking up the topic again. I have installed the smartmontools via pkg and briefly checked the SSD. The state is defined as PASSED. To understand the whole output. I can not find any error with the SSD.

I installed the packages manually via the package manager. Everything works again. Even Wireguard worked again right away.

Code: [Select]

smartctl -t short -a /dev/nvme0
smartctl 7.4 2023-08-01 r5530 [FreeBSD 13.2-RELEASE-p2 amd64] (local build)
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Number:                       Fanxiang S500PRO 512GB
Serial Number:                      FXS500PRO224690021
Firmware Version:                   SN09273
PCI Vendor/Subsystem ID:            0x1e4b
IEEE OUI Identifier:                0x000000
Total NVM Capacity:                 512,110,190,592 [512 GB]
Unallocated NVM Capacity:           0
Controller ID:                      0
NVMe Version:                       1.4
Number of Namespaces:               1
Namespace 1 Size/Capacity:          512,110,190,592 [512 GB]
Namespace 1 Formatted LBA Size:     512
Namespace 1 IEEE EUI-64:            000000 0000000001
Local Time is:                      Mon Aug 28 10:15:54 2023 CEST
Firmware Updates (0x14):            2 Slots, no Reset required
Optional Admin Commands (0x0017):   Security Format Frmw_DL Self_Test
Optional NVM Commands (0x001f):     Comp Wr_Unc DS_Mngmt Wr_Zero Sav/Sel_Feat
Log Page Attributes (0x02):         Cmd_Eff_Lg
Maximum Data Transfer Size:         512 Pages
Warning  Comp. Temp. Threshold:     90 Celsius
Critical Comp. Temp. Threshold:     95 Celsius

Supported Power States
St Op     Max   Active     Idle   RL RT WL WT  Ent_Lat  Ex_Lat
 0 +     6.50W       -        -    0  0  0  0        0       0
 1 +     5.80W       -        -    1  1  1  1        0       0
 2 +     3.60W       -        -    2  2  2  2        0       0
 3 -   0.7460W       -        -    3  3  3  3     5000   10000
 4 -   0.7260W       -        -    4  4  4  4     8000   45000

Supported LBA Sizes (NSID 0x1)
Id Fmt  Data  Metadt  Rel_Perf
 0 +     512       0         0

=== START OF SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

SMART/Health Information (NVMe Log 0x02)
Critical Warning:                   0x00
Temperature:                        41 Celsius
Available Spare:                    100%
Available Spare Threshold:          1%
Percentage Used:                    1%
Data Units Read:                    104,470 [53.4 GB]
Data Units Written:                 17,771,382 [9.09 TB]
Host Read Commands:                 2,640,907
Host Write Commands:                82,768,711
Controller Busy Time:               381
Power Cycles:                       25
Power On Hours:                     5,265
Unsafe Shutdowns:                   19
Media and Data Integrity Errors:    6
Error Information Log Entries:      116
Warning  Comp. Temperature Time:    0
Critical Comp. Temperature Time:    0
Temperature Sensor 1:               41 Celsius
Temperature Sensor 2:               46 Celsius

Error Information (NVMe Log 0x01, 16 of 64 entries)
No Errors Logged

Self-test Log (NVMe Log 0x06)
Self-test status: No self-test in progress
No Self-tests Logged

Self-test has begun
Use smartctl -X to abort test


[CJ]

Thank you for taking up the topic again. I have installed the smartmontools via pkg and briefly checked the SSD. The state is defined as PASSED. To understand the whole output. I can not find any error with the SSD.

I installed the packages manually via the package manager. Everything works again. Even Wireguard worked again right away.

Code: [Select]

smartctl -t short -a /dev/nvme0
smartctl 7.4 2023-08-01 r5530 [FreeBSD 13.2-RELEASE-p2 amd64] (local build)
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Number:                       Fanxiang S500PRO 512GB
Serial Number:                      FXS500PRO224690021
Firmware Version:                   SN09273
PCI Vendor/Subsystem ID:            0x1e4b
IEEE OUI Identifier:                0x000000
Total NVM Capacity:                 512,110,190,592 [512 GB]
Unallocated NVM Capacity:           0
Controller ID:                      0
NVMe Version:                       1.4
Number of Namespaces:               1
Namespace 1 Size/Capacity:          512,110,190,592 [512 GB]
Namespace 1 Formatted LBA Size:     512
Namespace 1 IEEE EUI-64:            000000 0000000001
Local Time is:                      Mon Aug 28 10:15:54 2023 CEST
Firmware Updates (0x14):            2 Slots, no Reset required
Optional Admin Commands (0x0017):   Security Format Frmw_DL Self_Test
Optional NVM Commands (0x001f):     Comp Wr_Unc DS_Mngmt Wr_Zero Sav/Sel_Feat
Log Page Attributes (0x02):         Cmd_Eff_Lg
Maximum Data Transfer Size:         512 Pages
Warning  Comp. Temp. Threshold:     90 Celsius
Critical Comp. Temp. Threshold:     95 Celsius

Supported Power States
St Op     Max   Active     Idle   RL RT WL WT  Ent_Lat  Ex_Lat
 0 +     6.50W       -        -    0  0  0  0        0       0
 1 +     5.80W       -        -    1  1  1  1        0       0
 2 +     3.60W       -        -    2  2  2  2        0       0
 3 -   0.7460W       -        -    3  3  3  3     5000   10000
 4 -   0.7260W       -        -    4  4  4  4     8000   45000

Supported LBA Sizes (NSID 0x1)
Id Fmt  Data  Metadt  Rel_Perf
 0 +     512       0         0

=== START OF SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

SMART/Health Information (NVMe Log 0x02)
Critical Warning:                   0x00
Temperature:                        41 Celsius
Available Spare:                    100%
Available Spare Threshold:          1%
Percentage Used:                    1%
Data Units Read:                    104,470 [53.4 GB]
Data Units Written:                 17,771,382 [9.09 TB]
Host Read Commands:                 2,640,907
Host Write Commands:                82,768,711
Controller Busy Time:               381
Power Cycles:                       25
Power On Hours:                     5,265
Unsafe Shutdowns:                   19
Media and Data Integrity Errors:    6
Error Information Log Entries:      116
Warning  Comp. Temperature Time:    0
Critical Comp. Temperature Time:    0
Temperature Sensor 1:               41 Celsius
Temperature Sensor 2:               46 Celsius

Error Information (NVMe Log 0x01, 16 of 64 entries)
No Errors Logged

Self-test Log (NVMe Log 0x06)
Self-test status: No self-test in progress
No Self-tests Logged

Self-test has begun
Use smartctl -X to abort test


I don't see any tests run, just that SMART hasn't raised any alerts.  You should run a long test to double check.