Home
Help
Search
Login
Register
OPNsense Forum
»
Archive
»
16.7 Legacy Series
»
Error when installing
« previous
next »
Print
Pages: [
1
]
Author
Topic: Error when installing (Read 5395 times)
jjones84
Newbie
Posts: 5
Karma: 0
Error when installing
«
on:
August 19, 2016, 06:29:35 am »
Hi all-
Trying to run the installer from a USB stick. Tried a couple different sticks with no luck. Using Windows 10 with Rufus with the proper .img file. See attachment where it stops.
Logged
fabian
Hero Member
Posts: 2769
Karma: 200
OPNsense Contributor (Language, VPN, Proxy, etc.)
Re: Error when installing
«
Reply #1 on:
August 19, 2016, 10:10:41 am »
Maybe it is the same issue as here:
https://forum.opnsense.org/index.php?topic=3354.msg10861#msg10861
Logged
franco
Administrator
Hero Member
Posts: 17661
Karma: 1611
Re: Error when installing
«
Reply #2 on:
August 19, 2016, 11:03:41 am »
Hi there,
This should help:
https://github.com/opnsense/tools/issues/28
Cheers,
Franco
Logged
jjones84
Newbie
Posts: 5
Karma: 0
Re: Error when installing
«
Reply #3 on:
August 20, 2016, 08:06:57 pm »
Thank you for the responses. I am attempting to tray the delay now. One a separate note as well... it seems to take forever to load... When I was doing some testing in VMware, it seemed to load nice and fast...
Logged
jjones84
Newbie
Posts: 5
Karma: 0
Re: Error when installing
«
Reply #4 on:
August 20, 2016, 09:05:29 pm »
No dice... first go round I set the delay to 10000. Second go round I set the delay to 500000. Below is what I get until it errors out with the original attachment.
umass1: SCSI over Bulk-Only; quirks = 0x4001
umass1:5:1:-1: Attached to scbus5
run_interrupt_driven_hooks: still waiting after 60 seconds for xpt_config
...Above line repeats every 60 seconds until it finally errors.
Logged
Print
Pages: [
1
]
« previous
next »
OPNsense Forum
»
Archive
»
16.7 Legacy Series
»
Error when installing
