OPNsense Forum

Archive => 16.7 Legacy Series => Topic started by: jjones84 on August 19, 2016, 06:29:35 am

Title: Error when installing
Post by: jjones84 on August 19, 2016, 06:29:35 am
Hi all-

Trying to run the installer from a USB stick. Tried a couple different sticks with no luck. Using Windows 10 with Rufus with the proper .img file. See attachment where it stops.
Title: Re: Error when installing
Post by: fabian on August 19, 2016, 10:10:41 am
Maybe it is the same issue as here: https://forum.opnsense.org/index.php?topic=3354.msg10861#msg10861
Title: Re: Error when installing
Post by: franco on August 19, 2016, 11:03:41 am
Hi there,

This should help: https://github.com/opnsense/tools/issues/28


Cheers,
Franco
Title: Re: Error when installing
Post by: jjones84 on August 20, 2016, 08:06:57 pm
Thank you for the responses. I am attempting to tray the delay now. One a separate note as well... it seems to take forever to load... When I was doing some testing in VMware, it seemed to load nice and fast...
Title: Re: Error when installing
Post by: jjones84 on August 20, 2016, 09:05:29 pm
No dice... first go round I set the delay to 10000. Second go round I set the delay to 500000. Below is what I get until it errors out with the original attachment.

umass1: SCSI over Bulk-Only; quirks = 0x4001
umass1:5:1:-1: Attached to scbus5
run_interrupt_driven_hooks: still waiting after 60 seconds for xpt_config
...Above line repeats every 60 seconds until it finally errors.