FRR BGP neighbour not populating neighbour routes ?!

[tryllz]

Hi,

I'm losing my mind having setup FRR BGP on 2 routers.

Router A - 192.168.9.21
Networks - 192.168.11.0/24

Router B - 192.168.9.31
Networks - 10.10.13.0/24, 10.10.15.0/24, 10.10.17.0/24

I can see in the routing table neither of the routes are being populated.
Router A


Router B


Router A Configuration

Code: [Select]

Building configuration...

Current configuration:
!
frr version 7.5.1
frr defaults traditional
hostname MFW.localdomain
log syslog notifications
!
router bgp 65551
 no bgp ebgp-requires-policy
 no bgp default ipv4-unicast
 neighbor 192.168.9.31 remote-as 65555
 neighbor 192.168.9.31 bfd
 neighbor 192.168.9.31 update-source em0
 !
 address-family ipv4 unicast
  redistribute connected
  neighbor 192.168.9.31 activate
  neighbor 192.168.9.31 prefix-list All in
  neighbor 192.168.9.31 prefix-list All out
  neighbor 192.168.9.31 route-map All in
  neighbor 192.168.9.31 route-map All out
 exit-address-family
 !
 address-family ipv6 unicast
  redistribute connected
 exit-address-family
!
route-map All permit 10
 match ip address prefix-list All
!
line vty
!
bfd
 peer 192.168.9.31
 !
!
end
Router B Configuration

Code: [Select]

Building configuration...

Current configuration:
!
frr version 7.5.1
frr defaults traditional
hostname SFW.localdomain
log syslog notifications
!
router bgp 65555
 no bgp ebgp-requires-policy
 no bgp default ipv4-unicast
 neighbor 192.168.9.21 remote-as 65551
 neighbor 192.168.9.21 bfd
 neighbor 192.168.9.21 update-source vmx0
 !
 address-family ipv4 unicast
  redistribute connected
  neighbor 192.168.9.21 activate
  neighbor 192.168.9.21 prefix-list All in
  neighbor 192.168.9.21 prefix-list All out
  neighbor 192.168.9.21 route-map All in
  neighbor 192.168.9.21 route-map All out
 exit-address-family
 !
 address-family ipv6 unicast
  redistribute connected
 exit-address-family
!
route-map All permit 20
 match ip address prefix-list All
!
line vty
!
bfd
 peer 192.168.9.21
 !
!
end
Both routers are advertising

Router A

Code: [Select]

BGP neighbor is 192.168.9.31, remote AS 65555, local AS 65551, external link
Hostname: SFW.localdomain
  BGP version 4, remote router ID 192.168.9.31, local router ID 192.168.11.2
  BGP state = Established, up for 00:00:03
  Last read 00:00:02, Last write 00:00:02
  Hold time is 180, keepalive interval is 60 seconds
  Neighbor capabilities:
    4 Byte AS: advertised and received
Router B

Code: [Select]

BGP neighbor is 192.168.9.21, remote AS 65551, local AS 65555, external link
Hostname: MFW.localdomain
  BGP version 4, remote router ID 192.168.11.2, local router ID 192.168.9.31
  BGP state = Established, up for 00:00:05
  Last read 00:00:04, Last write 00:00:04
  Hold time is 180, keepalive interval is 60 seconds
  Neighbor capabilities:
    4 Byte AS: advertised and received
Nt sure where the problem lies, seeing the below in logs.

Router A

Code: [Select]

2023-08-07T20:29:35 Notice zebra client 31 says hello and bids fair to announce only vnc routes vrf=0
2023-08-07T20:29:35 Notice frr_carp FRR received carp configuration event.
2023-08-07T20:29:35 Notice zebra client 28 says hello and bids fair to announce only bgp routes vrf=0
2023-08-07T20:29:35 Error bgpd [EC 100663304] ERROR: No such command on config line 34: ip prefix-list All seq 10 permit Any
2023-08-07T20:29:34 Error bgpd [EC 100663304] ERROR: No such command on config line 34: ip prefix-list All seq 10 permit Any
Router B

Code: [Select]

2023-08-07T20:36:18 Error bgpd [EC 100663299] %bgp_getsockname() failed for accept from_peer 192.168.9.21 fd 22 (peer fd 19)
2023-08-07T20:36:18 Error bgpd [EC 100663299] Can't get remote address and port: Socket is not connected
2023-08-07T20:36:18 Error bgpd [EC 33554465] 192.168.9.21 [FSM] Ignoring event BGP_Start in state Connect, prior events ConnectRetry_timer_expired, ConnectRetry_timer_expired, fd 22
2023-08-07T20:28:55 Error bgpd [EC 100663304] ERROR: No such command on config line 34: ip prefix-list All seq 20 permit Any
2023-08-07T20:28:55 Error bgpd [EC 100663304] ERROR: No such command on config line 34: ip prefix-list All seq 20 permit Any
2023-08-07T20:28:17 Warning zebra [EC 4043309122] Client 'bfd' encountered an error and is shutting down.
2023-08-07T20:28:17 Warning zebra [EC 4043309122] Client 'bgp' encountered an error and is shutting down.
Any thoughts ?!

[tryllz]

I tested this configuration in version 23.1.9, and it worked fine, after upgrading a new install it does not work.

The problem is I can't install FRR in 23.1.9 without upgrading, if anyome knows how to do that, that would be great too..

Thanks..

[tryllz]

Found the issue to be name of Prefix List and Route Maps, both were same.

Changed them to different names, and now neighbors populating routes.