Upgradethread 23.1.11_1 to 23.7

Started by seed, July 31, 2023, 03:07:59 PM

Previous topic - Next topic
Version 23.7.1 is avaibe, but It dosn`t fix the Groups-Bug.

Hello all,

I recently upgraded two 23.7 firewalls to 23.7.1 and I am now seeing this message in the log of the upgrade:

Configuring system logging...Error opening plugin module; module='examples', error='/usr/local/lib/syslog-ng/libexamples.so: Undefined symbol "random_choice_generator_parser"'
done.

Wanted to bring this to everyone's attention, in case this is an error.

Thanks,
Steve

> Configuring system logging...Error opening plugin module; module='examples', error='/usr/local/lib/syslog-ng/libexamples.so: Undefined symbol "random_choice_generator_parser"'
done.

I've seen this during testing. Seems to be a syslog-ng update error, but none that has any effect on operation so I've left it as is.

> Version 23.7.1 is avaibe, but It dosn`t fix the Groups-Bug.

It does fix 3 group-related bugs so the question is which bug are you still seeing?


Cheers,
Franco

Quote from: bobbysmithers on August 01, 2023, 01:32:51 AM
This update kills all my WireGuard tunnels on startup.
I have to disable and re-enable my WireGuard gateways every time I reboot to get them working again.
Any ideas on a fix or is this a new bug?
Previous version 23.1.11 worked perfectly.

Edit:
So, I can get everything working again just by disabling the WireGuard plugin for a few seconds and re-enabling it.
Did the startup order just change and WireGuard starts too quickly now before it can make a connection?
Is there a way to delay WireGuard from starting by like 10-15 seconds? I think that may fix it.

WireGuard is still broken for me after the 23.7.1 update. Everything else is fine, but all the WireGuard tunnels are down when OPNSense first starts up. I need to disable the WG plugin and re-enable it for the tunnels to reconnect and start working again. It's a minor inconvenience, but it would be nice if this bug could be fixed. Please.

Any idea how to fix this?
My VLANs are vlan0.666 and vlan0.667

Configuring WAN2 interface.
..done.
Generating /etc/resolv.conf...eval: $(vlan0@....): Bad substitution export: vlan0.666 nameserver: bad variable name eval: ${vlan0@....}: Bad substitution export: vlan0.666_searchdomain: bad variable name
done.
Generating /etc/hosts...done.
Configuring firewall.
done.

Quote from: bobbysmithers on August 09, 2023, 02:39:33 AM
Quote from: bobbysmithers on August 01, 2023, 01:32:51 AM
This update kills all my WireGuard tunnels on startup.
I have to disable and re-enable my WireGuard gateways every time I reboot to get them working again.
Any ideas on a fix or is this a new bug?
Previous version 23.1.11 worked perfectly.

Edit:
So, I can get everything working again just by disabling the WireGuard plugin for a few seconds and re-enabling it.
Did the startup order just change and WireGuard starts too quickly now before it can make a connection?
Is there a way to delay WireGuard from starting by like 10-15 seconds? I think that may fix it.

WireGuard is still broken for me after the 23.7.1 update. Everything else is fine, but all the WireGuard tunnels are down when OPNSense first starts up. I need to disable the WG plugin and re-enable it for the tunnels to reconnect and start working again. It's a minor inconvenience, but it would be nice if this bug could be fixed. Please.

Sounds like wireguard is starting before dns works and you use fqdn as peers?

Quote from: athurdent on August 09, 2023, 05:36:01 AM
Any idea how to fix this?
My VLANs are vlan0.666 and vlan0.667

Configuring WAN2 interface.
..done.
Generating /etc/resolv.conf...eval: $(vlan0@....): Bad substitution export: vlan0.666 nameserver: bad variable name eval: ${vlan0@....}: Bad substitution export: vlan0.666_searchdomain: bad variable name
done.
Generating /etc/hosts...done.
Configuring firewall.
done.


I can reproduce. Will fix today.


Quote from: franco on August 08, 2023, 04:06:30 PM
> Configuring system logging...Error opening plugin module; module='examples', error='/usr/local/lib/syslog-ng/libexamples.so: Undefined symbol "random_choice_generator_parser"'
done.

I've seen this during testing. Seems to be a syslog-ng update error, but none that has any effect on operation so I've left it as is.

> Version 23.7.1 is avaibe, but It dosn`t fix the Groups-Bug.

It does fix 3 group-related bugs so the question is which bug are you still seeing?


Cheers,
Franco

This still occured during the update from 23.7.1 to 23.7.1_3, but the syslog_ng service started and - in my configuration - also pushes logs to an external syslog server. So, no real problem, just FYI ...

Thanks for the great work on 23.7!

Hey, I start the upgrade yesterday and it is still in process. Is this normal?

***GOT REQUEST TO UPDATE***
Currently running OPNsense 23.1.9 at Tue Aug  8 11:38:34 CEST 2023
Updating OPNsense repository catalogue...
OPNsense repository is up to date.
All repositories are up to date.
Updating OPNsense repository catalogue...
OPNsense repository is up to date.
All repositories are up to date.
Checking for upgrades (82 candidates): .......... done
Processing candidates (82 candidates): ..... done
The following 42 package(s) will be affected (of 0 checked):

New packages to be INSTALLED:
libltdl: 2.4.7
libmcrypt: 2.5.8_3
php81-pear: 1.10.13
php81-pear-Crypt_CHAP: 1.5.0_1
php81-pecl-mcrypt: 1.0.6

Installed packages to be UPGRADED:
curl: 8.1.1 -> 8.1.2
easy-rsa: 3.1.4 -> 3.1.5
krb5: 1.20.1 -> 1.21
nettle: 3.9 -> 3.9.1
nss: 3.89.1 -> 3.90
ntp: 4.2.8p15_5 -> 4.2.8p17
openssh-portable: 9.3.p1,1 -> 9.3.p2,1
openssl: 1.1.1t_2,1 -> 1.1.1u,1
openvpn: 2.6.4 -> 2.6.5
opnsense: 23.1.9 -> 23.1.11_1
opnsense-update: 23.1.8 -> 23.1.11
pftop: 0.8_2 -> 0.8_4
php81: 8.1.19 -> 8.1.20
php81-ctype: 8.1.19 -> 8.1.20
php81-curl: 8.1.19 -> 8.1.20
php81-dom: 8.1.19 -> 8.1.20
php81-filter: 8.1.19 -> 8.1.20
php81-gettext: 8.1.19 -> 8.1.20
php81-ldap: 8.1.19 -> 8.1.20
php81-mbstring: 8.1.19 -> 8.1.20
php81-pdo: 8.1.19 -> 8.1.20
php81-phalcon: 5.2.1 -> 5.2.2
php81-session: 8.1.19 -> 8.1.20
php81-simplexml: 8.1.19 -> 8.1.20
php81-sockets: 8.1.19 -> 8.1.20
php81-sqlite3: 8.1.19 -> 8.1.20
php81-xml: 8.1.19 -> 8.1.20
php81-zlib: 8.1.19 -> 8.1.20
py39-markupsafe: 2.1.2 -> 2.1.3
py39-pandas: 2.0.1_1,1 -> 2.0.2,1
py39-setuptools: 63.1.0 -> 63.1.0_1
py39-sqlite3: 3.9.16_7 -> 3.9.17_7
py39-ujson: 5.7.0 -> 5.8.0
python39: 3.9.16_2 -> 3.9.17
squid: 5.8 -> 5.9
strongswan: 5.9.10_1 -> 5.9.10_2
suricata: 6.0.12 -> 6.0.13

Number of packages to be installed: 5
Number of packages to be upgraded: 37

The process will require 5 MiB more space.
57 MiB to be downloaded.
[1/42] Fetching php81-sqlite3-8.1.20.pkg: ... done
[2/42] Fetching php81-sockets-8.1.20.pkg: ..... done
[3/42] Fetching opnsense-update-23.1.11.pkg: ..... done
[4/42] Fetching openssl-1.1.1u,1.pkg: .......... done
[5/42] Fetching nettle-3.9.1.pkg: .......... done
[6/42] Fetching php81-pear-1.10.13.pkg: .......... done
[7/42] Fetching nss-3.90.pkg: .......... done
[8/42] Fetching py39-markupsafe-2.1.3.pkg: .. done
[9/42] Fetching easy-rsa-3.1.5.pkg: ....... done
[10/42] Fetching openvpn-2.6.5.pkg: .......... done
[11/42] Fetching krb5-1.21.pkg: .......... done
[12/42] Fetching php81-filter-8.1.20.pkg: ... done
[13/42] Fetching php81-8.1.20.pkg: .......... done
[14/42] Fetching py39-pandas-2.0.2,1.pkg: .......... done
[15/42] Fetching python39-3.9.17.pkg: .......... done
[16/42] Fetching libmcrypt-2.5.8_3.pkg: .......... done
[17/42] Fetching py39-sqlite3-3.9.17_7.pkg: .... done
[18/42] Fetching ntp-4.2.8p17.pkg: .......... done
[19/42] Fetching py39-ujson-5.8.0.pkg: ...... done
[20/42] Fetching php81-ctype-8.1.20.pkg: . done
[21/42] Fetching php81-simplexml-8.1.20.pkg: ... done
[22/42] Fetching php81-session-8.1.20.pkg: ..... done
[23/42] Fetching curl-8.1.2.pkg: .......... done
[24/42] Fetching php81-zlib-8.1.20.pkg: ... done
[25/42] Fetching php81-phalcon-5.2.2.pkg: .......... done
[26/42] Fetching py39-setuptools-63.1.0_1.pkg: .......... done
[27/42] Fetching openssh-portable-9.3.p2,1.pkg: .......... done
[28/42] Fetching libltdl-2.4.7.pkg: ..... done
[29/42] Fetching php81-dom-8.1.20.pkg: ........ done
[30/42] Fetching suricata-6.0.13.pkg: .......... done
[31/42] Fetching php81-pear-Crypt_CHAP-1.5.0_1.pkg: . done
[32/42] Fetching php81-ldap-8.1.20.pkg: ..... done
[33/42] Fetching php81-xml-8.1.20.pkg: ... done
[34/42] Fetching php81-pdo-8.1.20.pkg: ....... done
[35/42] Fetching php81-curl-8.1.20.pkg: ..... done
[36/42] Fetching php81-mbstring-8.1.20.pkg: .......... done
[37/42] Fetching opnsense-23.1.11_1.pkg: .......... done
[38/42] Fetching squid-5.9.pkg: .......... done
[39/42] Fetching strongswan-5.9.10_2.pkg: .......... done
[40/42] Fetching php81-gettext-8.1.20.pkg: . done
[41/42] Fetching php81-pecl-mcrypt-1.0.6.pkg: .. done
[42/42] Fetching pftop-0.8_4.pkg: .......... done
Checking integrity... done (0 conflicting)
[1/42] Upgrading openssl from 1.1.1t_2,1 to 1.1.1u,1...
[1/42] Extracting openssl-1.1.1u,1: .......... done
[2/42] Upgrading python39 from 3.9.16_2 to 3.9.17...
[2/42] Extracting python39-3.9.17: .......... done
[3/42] Upgrading py39-setuptools from 63.1.0 to 63.1.0_1...
[3/42] Extracting py39-setuptools-63.1.0_1: .......... done
[4/42] Upgrading krb5 from 1.20.1 to 1.21...
[4/42] Extracting krb5-1.21: .......... done
[5/42] Upgrading php81 from 8.1.19 to 8.1.20...
[5/42] Extracting php81-8.1.20: .......... done
[6/42] Installing libmcrypt-2.5.8_3...
[6/42] Extracting libmcrypt-2.5.8_3: .......... done
[7/42] Upgrading py39-sqlite3 from 3.9.16_7 to 3.9.17_7...
[7/42] Extracting py39-sqlite3-3.9.17_7: ........ done
[8/42] Upgrading php81-zlib from 8.1.19 to 8.1.20...
[8/42] Extracting php81-zlib-8.1.20: ........ done
[9/42] Installing libltdl-2.4.7...
[9/42] Extracting libltdl-2.4.7: .......... done
[10/42] Upgrading php81-xml from 8.1.19 to 8.1.20...
[10/42] Extracting php81-xml-8.1.20: ......... done
[11/42] Upgrading nettle from 3.9 to 3.9.1...
[11/42] Extracting nettle-3.9.1: .......... done
[12/42] Installing php81-pear-1.10.13...
[12/42] Extracting php81-pear-1.10.13: .......... done
[13/42] Upgrading nss from 3.89.1 to 3.90...
[13/42] Extracting nss-3.90: .......... done
[14/42] Upgrading py39-markupsafe from 2.1.2 to 2.1.3...
[14/42] Extracting py39-markupsafe-2.1.3: .......... done
[15/42] Upgrading easy-rsa from 3.1.4 to 3.1.5...
[15/42] Extracting easy-rsa-3.1.5: .......... done
[16/42] Upgrading py39-pandas from 2.0.1_1,1 to 2.0.2,1...
[16/42] Extracting py39-pandas-2.0.2,1: .......... done
[17/42] Upgrading php81-session from 8.1.19 to 8.1.20...
[17/42] Extracting php81-session-8.1.20: .......... done
[18/42] Upgrading curl from 8.1.1 to 8.1.2...
[18/42] Extracting curl-8.1.2: .......... done
[19/42] Upgrading php81-pdo from 8.1.19 to 8.1.20...
[19/42] Extracting php81-pdo-8.1.20: .......... done
[20/42] Upgrading php81-mbstring from 8.1.19 to 8.1.20...
[20/42] Extracting php81-mbstring-8.1.20: .......... done
[21/42] Installing php81-pecl-mcrypt-1.0.6...
[21/42] Extracting php81-pecl-mcrypt-1.0.6: ........ done
[22/42] Upgrading php81-sqlite3 from 8.1.19 to 8.1.20...
[22/42] Extracting php81-sqlite3-8.1.20: ......... done
[23/42] Upgrading php81-sockets from 8.1.19 to 8.1.20...
[23/42] Extracting php81-sockets-8.1.20: .......... done
[24/42] Upgrading opnsense-update from 23.1.8 to 23.1.11...
[24/42] Extracting opnsense-update-23.1.11: .......... done
[25/42] Upgrading openvpn from 2.6.4 to 2.6.5...
===> Creating groups.
Using existing group 'openvpn'.
===> Creating users
Using existing user 'openvpn'.
[25/42] Extracting openvpn-2.6.5: .......... done
[26/42] Upgrading php81-filter from 8.1.19 to 8.1.20...
[26/42] Extracting php81-filter-8.1.20: ......... done
[27/42] Upgrading ntp from 4.2.8p15_5 to 4.2.8p17...
[27/42] Extracting ntp-4.2.8p17: .......... done
[28/42] Upgrading py39-ujson from 5.7.0 to 5.8.0...
[28/42] Extracting py39-ujson-5.8.0: ......... done
[29/42] Upgrading php81-ctype from 8.1.19 to 8.1.20...
[29/42] Extracting php81-ctype-8.1.20: ........ done
[30/42] Upgrading php81-simplexml from 8.1.19 to 8.1.20...
[30/42] Extracting php81-simplexml-8.1.20: ......... done
[31/42] Upgrading php81-phalcon from 5.2.1 to 5.2.2...
[31/42] Extracting php81-phalcon-5.2.2: ........ done
[32/42] Upgrading openssh-portable from 9.3.p1,1 to 9.3.p2,1...
[32/42] Extracting openssh-portable-9.3.p2,1: .......... done
[33/42] Upgrading php81-dom from 8.1.19 to 8.1.20...
[33/42] Extracting php81-dom-8.1.20: .......... done
[34/42] Upgrading suricata from 6.0.12 to 6.0.13...
[34/42] Extracting suricata-6.0.13: .......... done
[35/42] Installing php81-pear-Crypt_CHAP-1.5.0_1...
[35/42] Extracting php81-pear-Crypt_CHAP-1.5.0_1: ... done
install ok: channel://pear.php.net/Crypt_CHAP-1.5.0
[36/42] Upgrading php81-ldap from 8.1.19 to 8.1.20...
[36/42] Extracting php81-ldap-8.1.20: ........ done
[37/42] Upgrading php81-curl from 8.1.19 to 8.1.20...
[37/42] Extracting php81-curl-8.1.20: .......... done
[38/42] Upgrading squid from 5.8 to 5.9...
===> Creating groups.
Using existing group 'squid'.
===> Creating users
Using existing user 'squid'.
===> Creating homedir(s)
===> Pre-installation configuration for squid-5.9
[38/42] Extracting squid-5.9: .......... done
[39/42] Upgrading strongswan from 5.9.10_1 to 5.9.10_2...
[39/42] Extracting strongswan-5.9.10_2: .......... done
[40/42] Upgrading php81-gettext from 8.1.19 to 8.1.20...
[40/42] Extracting php81-gettext-8.1.20: ........ done
[41/42] Upgrading pftop from 0.8_2 to 0.8_4...
[41/42] Extracting pftop-0.8_4: ..... done
[42/42] Upgrading opnsense from 23.1.9 to 23.1.11_1...
[42/42] Extracting opnsense-23.1.11_1: .......... done
Stopping configd...done
Resetting root shell
Updating /etc/shells
Unhooking from /etc/rc
Unhooking from /etc/rc.shutdown
Updating /etc/shells
Registering root shell
Hooking into /etc/rc
Hooking into /etc/rc.shutdown
Starting configd.
>>> Invoking update script 'refresh'
Writing firmware setting...done.
Writing trust files...done.
Configuring login behaviour...done.
Configuring system logging...done.
=====
Message from php81-pecl-mcrypt-1.0.6:

--
This file has been added to automatically load the installed extension:
/usr/local/etc/php/ext-20-mcrypt.ini
=====
Message from openvpn-2.6.5:

--
Note that OpenVPN now configures a separate user and group "openvpn",
which should be used instead of the NFS user "nobody"
when an unprivileged user account is desired.

It is advisable to review existing configuration files and
to consider adding/changing user openvpn and group openvpn.
You may need to manually remove /usr/local/etc/ssh/sshd_config if it is no longer needed.
You may need to manually remove /usr/local/etc/suricata/classification.config if it is no longer needed.
You may need to manually remove /usr/local/etc/suricata/reference.config if it is no longer needed.
You may need to manually remove /usr/local/etc/suricata/suricata.yaml if it is no longer needed.
You may need to manually remove /usr/local/etc/squid/squid.conf if it is no longer needed.
=====
Message from strongswan-5.9.10_2:

--
The default strongSwan configuration interface have been updated to vici.
To use the stroke interface by default either compile the port without the vici option or
set 'strongswan_interface="stroke"' in your rc.conf file.
=====
Message from opnsense-23.1.11_1:

--
I'm no chicken
Checking integrity... done (0 conflicting)
Nothing to do.
Checking all packages: .......... done
The following package files will be deleted:
/var/cache/pkg/php81-sqlite3-8.1.20~268aa25c14.pkg
/var/cache/pkg/openssl-1.1.1u,1~1af52f3ae1.pkg
/var/cache/pkg/php81-sqlite3-8.1.20.pkg
/var/cache/pkg/php81-sockets-8.1.20~67ac1b380d.pkg
/var/cache/pkg/php81-sockets-8.1.20.pkg
/var/cache/pkg/opnsense-update-23.1.11~be0d7994fc.pkg
/var/cache/pkg/opnsense-update-23.1.11.pkg
/var/cache/pkg/nettle-3.9.1~dc2bd05af6.pkg
/var/cache/pkg/openssl-1.1.1u,1.pkg
/var/cache/pkg/nettle-3.9.1.pkg
/var/cache/pkg/php81-pear-1.10.13~b5d4c49528.pkg
/var/cache/pkg/nss-3.90~b460b07f03.pkg
/var/cache/pkg/php81-filter-8.1.20.pkg
/var/cache/pkg/php81-pear-1.10.13.pkg
/var/cache/pkg/nss-3.90.pkg
/var/cache/pkg/py39-markupsafe-2.1.3~7350a0e3c0.pkg
/var/cache/pkg/easy-rsa-3.1.5~e89f7ea2f1.pkg
/var/cache/pkg/py39-markupsafe-2.1.3.pkg
/var/cache/pkg/easy-rsa-3.1.5.pkg
/var/cache/pkg/openvpn-2.6.5~ec608e53dd.pkg
/var/cache/pkg/openvpn-2.6.5.pkg
/var/cache/pkg/krb5-1.21~9b283f078f.pkg
/var/cache/pkg/krb5-1.21.pkg
/var/cache/pkg/php81-filter-8.1.20~c2ac38ab8f.pkg
/var/cache/pkg/php81-8.1.20~c92f8420ed.pkg
/var/cache/pkg/php81-8.1.20.pkg
/var/cache/pkg/py39-pandas-2.0.2,1~42f88b520b.pkg
/var/cache/pkg/curl-8.1.2.pkg
/var/cache/pkg/py39-sqlite3-3.9.17_7.pkg
/var/cache/pkg/py39-pandas-2.0.2,1.pkg
/var/cache/pkg/python39-3.9.17~8beccbe2a6.pkg
/var/cache/pkg/python39-3.9.17.pkg
/var/cache/pkg/libmcrypt-2.5.8_3~2af8cb0f52.pkg
/var/cache/pkg/libmcrypt-2.5.8_3.pkg
/var/cache/pkg/py39-sqlite3-3.9.17_7~9ae70d4822.pkg
/var/cache/pkg/ntp-4.2.8p17~555b3b4035.pkg
/var/cache/pkg/py39-ujson-5.8.0.pkg
/var/cache/pkg/ntp-4.2.8p17.pkg
/var/cache/pkg/py39-ujson-5.8.0~c498f77d44.pkg
/var/cache/pkg/php81-ctype-8.1.20~07533bd474.pkg
/var/cache/pkg/php81-simplexml-8.1.20.pkg
/var/cache/pkg/php81-ctype-8.1.20.pkg
/var/cache/pkg/php81-simplexml-8.1.20~d346d4a3d6.pkg
/var/cache/pkg/php81-session-8.1.20~bbbe67cc4d.pkg
/var/cache/pkg/curl-8.1.2~8f8da611bc.pkg
/var/cache/pkg/php81-session-8.1.20.pkg
/var/cache/pkg/php81-zlib-8.1.20~69c3cad62d.pkg
/var/cache/pkg/php81-zlib-8.1.20.pkg
/var/cache/pkg/php81-phalcon-5.2.2~e7a1e5964f.pkg
/var/cache/pkg/php81-phalcon-5.2.2.pkg
/var/cache/pkg/py39-setuptools-63.1.0_1~a689cb8827.pkg
/var/cache/pkg/openssh-portable-9.3.p2,1~c40ca9611d.pkg
/var/cache/pkg/py39-setuptools-63.1.0_1.pkg
/var/cache/pkg/libltdl-2.4.7~f812017b66.pkg
/var/cache/pkg/openssh-portable-9.3.p2,1.pkg
/var/cache/pkg/libltdl-2.4.7.pkg
/var/cache/pkg/php81-dom-8.1.20~9c152dbc28.pkg
/var/cache/pkg/php81-dom-8.1.20.pkg
/var/cache/pkg/suricata-6.0.13~cc549dbb70.pkg
/var/cache/pkg/suricata-6.0.13.pkg
/var/cache/pkg/php81-pear-Crypt_CHAP-1.5.0_1~aba54a1597.pkg
/var/cache/pkg/php81-ldap-8.1.20~ffc7245bc6.pkg
/var/cache/pkg/php81-pear-Crypt_CHAP-1.5.0_1.pkg
/var/cache/pkg/php81-ldap-8.1.20.pkg
/var/cache/pkg/php81-xml-8.1.20~afb43a99ec.pkg
/var/cache/pkg/php81-xml-8.1.20.pkg
/var/cache/pkg/php81-pdo-8.1.20~d9f84e1b36.pkg
/var/cache/pkg/php81-pdo-8.1.20.pkg
/var/cache/pkg/php81-curl-8.1.20~0b3dccbc47.pkg
/var/cache/pkg/php81-curl-8.1.20.pkg
/var/cache/pkg/php81-mbstring-8.1.20~4d7425cbbd.pkg
/var/cache/pkg/php81-mbstring-8.1.20.pkg
/var/cache/pkg/opnsense-23.1.11_1~98d4aca2e7.pkg
/var/cache/pkg/squid-5.9~7ff7ab92d9.pkg
/var/cache/pkg/opnsense-23.1.11_1.pkg
/var/cache/pkg/squid-5.9.pkg
/var/cache/pkg/strongswan-5.9.10_2~a41dbad962.pkg
/var/cache/pkg/strongswan-5.9.10_2.pkg
/var/cache/pkg/php81-gettext-8.1.20~20bc4fab2e.pkg
/var/cache/pkg/php81-pecl-mcrypt-1.0.6~515f90443c.pkg
/var/cache/pkg/php81-gettext-8.1.20.pkg
/var/cache/pkg/pftop-0.8_4~47af6af592.pkg
/var/cache/pkg/php81-pecl-mcrypt-1.0.6.pkg
/var/cache/pkg/pftop-0.8_4.pkg
The cleanup will free 57 MiB
Deleting files: .......... done
All done
Nothing to do.
Starting web GUI...done.
Generating RRD graphs...done.
Fetching base-23.1.11-amd64.txz: ...[...]


opnsense is running in a vm and the ressources are fine... I don not understand this...



Is this normal?



August 09, 2023, 02:09:39 PM #117 Last Edit: August 09, 2023, 03:37:41 PM by secdoc
Upgraded to 23.7.1 from 23.1.1. The initial upgrade had a few bumps. For some reason it appears it did not complete all of the necessary reboots. From the console, all areas seemed to  carry over without an issue but for some reason it was not allowing traffic from the vlans or dhcp even though it was showing as configured and available. I had to force several reboots from the console/terminal to get it fully functional. The issue that I seem to be experiencing now is the  system seems to be running very hot in comparison to the previous version. The CPU and core temps are at least 20 degrees warmer than previous and with that see a large number of critical temp alerts.
#####UPDATE#####
System Information:
User-Agent Mozilla/5.0 (X11; Linux x86_64; rv:109.0) Gecko/20100101 Firefox/116.0
FreeBSD 13.2-RELEASE-p2 stable/23.7-n254746-cdad4e9df7f SMP amd64
OPNsense 23.7.1_3 239f8d1f8
Plugins os-crowdsec-1.0.6 os-ddclient-1.14 os-dmidecode-1.1_1 os-dyndns-1.27_3 os-etpro-telemetry-1.6_1 os-intrusion-detection-content-et-open-1.0.1 os-intrusion-detection-content-et-pro-1.0.2_1 os-intrusion-detection-content-pt-open-1.0_1 os-intrusion-detection-content-snort-vrt-1.1_1 os-iperf-1.0_1 os-maltrail-1.10 os-netdata-1.2_1 os-nginx-1.32.1_3 os-sensei-1.14.2 os-sensei-agent-1.14 os-sensei-updater-1.14 os-sunnyvalley-1.2_3 os-telegraf-1.12.8 os-theme-cicada-1.34 os-theme-rebellion-1.8.8 os-vnstat-1.3_1 os-wireguard-1.13_7
Time Wed, 09 Aug 2023 13:26:41 +0000
OpenSSL 1.1.1v  1 Aug 2023
Python 3.9.17
PHP 8.2.8
PHP Errors:
[09-Aug-2023 12:27:09 Etc/UTC] Error: Call to undefined function lock() in /usr/local/etc/inc/plugins.inc.d/dyndns/phpDynDNS.inc:158
Stack trace:
#0 /usr/local/etc/inc/plugins.inc.d/dyndns.inc(169): updatedns->__construct('dyndns', 'gambit.dnsdojo....', 'secdoc', 'b6f0e74070da11e...', NULL, '', 'wan', NULL, NULL, NULL, '', NULL, '', '', '', '', 'wan', '0', false, false, false)
#1 /usr/local/etc/inc/plugins.inc.d/dyndns.inc(212): dyndns_configure_client(Array)
#2 /usr/local/etc/inc/plugins.inc(304): dyndns_configure_do(true)
#3 /usr/local/etc/rc.bootup(104): plugins_configure('bootup', true)
#4 {main}
[09-Aug-2023 12:27:10 Etc/UTC] Error: Call to undefined function lock() in /usr/local/etc/inc/plugins.inc.d/dyndns/phpDynDNS.inc:158
Stack trace:
#0 /usr/local/etc/inc/plugins.inc.d/dyndns.inc(169): updatedns->__construct('dyndns', 'gambit.dnsdojo....', 'secdoc', 'b6f0e74070da11e...', NULL, '', 'wan', NULL, NULL, NULL, '', NULL, '', '', '', '', 'wan', '0', false, false, false)
#1 /usr/local/etc/inc/plugins.inc.d/dyndns.inc(212): dyndns_configure_client(Array)
#2 /usr/local/etc/inc/plugins.inc(304): dyndns_configure_do(false, 'wan')
#3 /usr/local/etc/rc.newwanip(174): plugins_configure('newwanip', false, Array)
#4 {main}
dmesg.boot:
Copyright (c) 1992-2021 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 13.2-RELEASE-p2 stable/23.7-n254746-cdad4e9df7f SMP amd64
FreeBSD clang version 14.0.5 (https://github.com/llvm/llvm-project.git llvmorg-14.0.5-0-gc12386ae247c)
VT(efifb): resolution 1366x768
CPU: 11th Gen Intel(R) Core(TM) i7-1165G7 @ 2.80GHz (2803.20-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x806c1  Family=0x6  Model=0x8c  Stepping=1
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x7ffafbbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
  AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
  AMD Features2=0x121<LAHF,ABM,Prefetch>
  Structured Extended Features=0xf3bfa7eb<FSGSBASE,TSCADJ,BMI1,AVX2,FDPEXC,SMEP,BMI2,ERMS,INVPCID,NFPUSG,PQE,AVX512F,AVX512DQ,RDSEED,ADX,SMAP,AVX512IFMA,CLFLUSHOPT,CLWB,PROCTRACE,AVX512CD,SHA,AVX512BW,AVX512VL>
  Structured Extended Features2=0x18c05fde<AVX512VBMI,UMIP,PKU,OSPKE,AVX512VBMI2,GFNI,VAES,VPCLMULQDQ,AVX512VNNI,AVX512BITALG,AVX512VPOPCNTDQ,RDPID,MOVDIRI,MOVDIR64B>
  Structured Extended Features3=0xfc100510<FSRM,AVX512VP2INTERSECT,MD_CLEAR,IBT,IBPB,STIBP,L1DFL,ARCH_CAP,CORE_CAP,SSBD>
  XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES>
  IA32_ARCH_CAPS=0x6b<RDCL_NO,IBRS_ALL,SKIP_L1DFL_VME,MDS_NO>
  VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr
  TSC: P-state invariant, performance statistics
real memory  = 34359738368 (32768 MB)
avail memory = 33032052736 (31501 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <ALASKA A M I >
FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 hardware threads
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
random: unblocking device.
ioapic0 <Version 2.0> irqs 0-119
Launching APs: 1 5 4 6 7 2 3
random: entropy device external interface
wlan: mac acl policy registered
kbd1 at kbdmux0
WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0.
efirtc0: <EFI Realtime Clock>
efirtc0: registered as a time-of-day clock, resolution 1.000000s
smbios0: <System Management BIOS> at iomem 0x43ca5000-0x43ca501e
smbios0: Version: 3.3, BCD Revision: 3.3
aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256>
acpi0: <ALASKA A M I >
ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - ^SPI1.SPFD.CVFD (20201113/dspkginit-605)
ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - ^SPI1.SPFD.CVFD (20201113/dspkginit-605)
ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - ^XHCI.RHUB.HS04.VI2C (20201113/dspkginit-605)
ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - ^XHCI.RHUB.HS04.VI2C (20201113/dspkginit-605)
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 19200000 Hz quality 950
Event timer "HPET" frequency 19200000 Hz quality 550
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0x3000-0x303f mem 0x6000000000-0x6000ffffff,0x4000000000-0x400fffffff irq 16 at device 2.0 on pci0
vgapci0: Boot video device
pcib1: <ACPI PCI-PCI bridge> irq 19 at device 6.0 on pci0
pci1: <ACPI PCI bus> on pcib1
nvme0: <Generic NVMe Device> mem 0x51600000-0x51603fff,0x51604000-0x516040ff irq 16 at device 0.0 on pci1
xhci0: <Intel Tiger Lake-LP Thunderbolt 4 USB controller> mem 0x6001110000-0x600111ffff at device 13.0 on pci0
xhci0: 32 bytes context size, 64-bit DMA
usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
xhci1: <Intel Tiger Lake-LP USB 3.2 controller> mem 0x6001100000-0x600110ffff irq 16 at device 20.0 on pci0
xhci1: 32 bytes context size, 64-bit DMA
usbus1 on xhci1
usbus1: 5.0Gbps Super Speed USB v3.0
pci0: <memory, RAM> at device 20.2 (no driver attached)
pci0: <simple comms> at device 22.0 (no driver attached)
ahci0: <AHCI SATA controller> port 0x3090-0x3097,0x3080-0x3083,0x3060-0x307f mem 0x51700000-0x51701fff,0x51703000-0x517030ff,0x51702000-0x517027ff irq 16 at device 23.0 on pci0
ahci0: AHCI v1.31 with 2 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 16 at device 0.0 on pci2
pci3: <ACPI PCI bus> on pcib3
pcib4: <PCI-PCI bridge> irq 19 at device 3.0 on pci3
pci4: <PCI bus> on pcib4
igc0: <Intel(R) Ethernet Controller I226-V> mem 0x51400000-0x514fffff,0x51500000-0x51503fff irq 19 at device 0.0 on pci4
igc0: Using 1024 TX descriptors and 1024 RX descriptors
igc0: Using 4 RX queues 4 TX queues
igc0: Using MSI-X interrupts with 5 vectors
igc0: Ethernet address: 00:90:27:e8:33:1f
igc0: netmap queues/slots: TX 4/1024, RX 4/1024
pcib5: <PCI-PCI bridge> irq 19 at device 7.0 on pci3
pci5: <PCI bus> on pcib5
pcib6: <ACPI PCI-PCI bridge> irq 17 at device 28.5 on pci0
pci6: <ACPI PCI bus> on pcib6
igc1: <Intel(R) Ethernet Controller I226-V> mem 0x51100000-0x511fffff,0x51200000-0x51203fff irq 17 at device 0.0 on pci6
igc1: Using 1024 TX descriptors and 1024 RX descriptors
igc1: Using 4 RX queues 4 TX queues
igc1: Using MSI-X interrupts with 5 vectors
igc1: Ethernet address: 00:90:27:e8:33:20
igc1: netmap queues/slots: TX 4/1024, RX 4/1024
pcib7: <ACPI PCI-PCI bridge> irq 18 at device 28.6 on pci0
pci7: <ACPI PCI bus> on pcib7
igc2: <Intel(R) Ethernet Controller I226-V> mem 0x50e00000-0x50efffff,0x50f00000-0x50f03fff irq 18 at device 0.0 on pci7
igc2: Using 1024 TX descriptors and 1024 RX descriptors
igc2: Using 4 RX queues 4 TX queues
igc2: Using MSI-X interrupts with 5 vectors
igc2: Ethernet address: 00:90:27:e8:33:21
igc2: netmap queues/slots: TX 4/1024, RX 4/1024
pcib8: <ACPI PCI-PCI bridge> irq 19 at device 28.7 on pci0
pci8: <ACPI PCI bus> on pcib8
igc3: <Intel(R) Ethernet Controller I226-V> mem 0x50b00000-0x50bfffff,0x50c00000-0x50c03fff irq 19 at device 0.0 on pci8
igc3: Using 1024 TX descriptors and 1024 RX descriptors
igc3: Using 4 RX queues 4 TX queues
igc3: Using MSI-X interrupts with 5 vectors
igc3: Ethernet address: 00:90:27:e8:33:22
igc3: netmap queues/slots: TX 4/1024, RX 4/1024
pcib9: <ACPI PCI-PCI bridge> irq 16 at device 29.0 on pci0
pci9: <ACPI PCI bus> on pcib9
igc4: <Intel(R) Ethernet Controller I226-V> mem 0x50800000-0x508fffff,0x50900000-0x50903fff irq 16 at device 0.0 on pci9
igc4: Using 1024 TX descriptors and 1024 RX descriptors
igc4: Using 4 RX queues 4 TX queues
igc4: Using MSI-X interrupts with 5 vectors
igc4: Ethernet address: 00:90:27:e8:33:23
igc4: netmap queues/slots: TX 4/1024, RX 4/1024
pcib10: <ACPI PCI-PCI bridge> irq 17 at device 29.1 on pci0
pci10: <ACPI PCI bus> on pcib10
igc5: <Intel(R) Ethernet Controller I226-V> mem 0x50500000-0x505fffff,0x50600000-0x50603fff irq 17 at device 0.0 on pci10
igc5: Using 1024 TX descriptors and 1024 RX descriptors
igc5: Using 4 RX queues 4 TX queues
igc5: Using MSI-X interrupts with 5 vectors
igc5: Ethernet address: 00:90:27:e8:33:24
igc5: netmap queues/slots: TX 4/1024, RX 4/1024
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
hdac0: <Intel Tiger Lake HDA Controller> mem 0x6001128000-0x600112bfff,0x6001000000-0x60010fffff irq 16 at device 31.3 on pci0
pci0: <serial bus> at device 31.5 (no driver attached)
acpi_button0: <Sleep Button> on acpi0
acpi_button1: <Power Button> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
acpi_syscontainer0: <System Container> on acpi0
acpi_syscontainer1: <System Container> on acpi0
atrtc0: <AT realtime clock> at port 0x70 irq 8 on isa0
atrtc0: Warning: Couldn't map I/O.
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
hwpstate_intel0: <Intel Speed Shift> on cpu0
hwpstate_intel1: <Intel Speed Shift> on cpu1
hwpstate_intel2: <Intel Speed Shift> on cpu2
hwpstate_intel3: <Intel Speed Shift> on cpu3
hwpstate_intel4: <Intel Speed Shift> on cpu4
hwpstate_intel5: <Intel Speed Shift> on cpu5
hwpstate_intel6: <Intel Speed Shift> on cpu6
hwpstate_intel7: <Intel Speed Shift> on cpu7
Timecounter "TSC-low" frequency 1401613928 Hz quality 1000
Timecounters tick every 1.000 msec
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
ugen0.1: <Intel XHCI root HUB> at usbus0
ugen1.1: <Intel XHCI root HUB> at usbus1
uhub0 on usbus0
uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
uhub1 on usbus1
uhub1: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1
nvme0: Allocated 200MB host memory buffer
nvd0: <WD Blue SN570 1TB> NVMe namespace
nvme0: async event occurred (type 0x1, info 0x01, page 0x02)
nvd0: 953869MB (1953525168 512 byte sectors)
hdacc0: <Intel Tiger Lake HDA CODEC> at cad 2 on hdac0
hdaa0: <Intel Tiger Lake Audio Function Group> at nid 1 on hdacc0
nvme0: temperature above threshold
pcm0: <Intel Tiger Lake (HDMI/DP 8ch)> at nid 4 on hdaa0
Trying to mount root from zfs:zroot/ROOT/default []...
uhub0: 5 ports with 5 removable, self powered
uhub1: 16 ports with 16 removable, self powered
ugen1.2: <Telink Wireless Receiver> at usbus1
ukbd0 on uhub1
ukbd0: <Telink Wireless Receiver, class 0/0, rev 1.10/1.04, addr 1> on usbus1
kbd2 at ukbd0
igc0: link state changed to UP
igc1: link state changed to UP
ichsmb0: <Intel Tiger Lake SMBus controller> port 0xefa0-0xefbf mem 0x6001130000-0x60011300ff irq 16 at device 31.4 on pci0
smbus0: <System Management Bus> on ichsmb0
acpi_wmi0: <ACPI-WMI mapping> on acpi0
acpi_wmi0: cannot find EC device
acpi_wmi0: Embedded MOF found
ACPI: \134_SB.WFDE.WQCC: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361)
acpi_wmi1: <ACPI-WMI mapping> on acpi0
acpi_wmi1: cannot find EC device
acpi_wmi1: Embedded MOF found
ACPI: \134_SB.WFTE.WQCC: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361)
ums0 on uhub1
ums0: <Telink Wireless Receiver, class 0/0, rev 1.10/1.04, addr 1> on usbus1
ums0: 5 buttons and [XYZ] coordinates ID=1
lo0: link state changed to UP
coretemp0: <CPU On-Die Thermal Sensors> on cpu0
pflog0: permanently promiscuous mode enabled
igc1: link state changed to DOWN
vlan0: changing name to 'vlan01'
vlan1: changing name to 'vlan02'
vlan2: changing name to 'vlan04'
vlan3: changing name to 'vlan040'
vlan4: changing name to 'vlan05'
vlan5: changing name to 'vlan06'
vlan6: changing name to 'vlan07'
vlan7: changing name to 'vlan08'
vlan8: changing name to 'vlan09'
[fib_algo] inet.0 (bsearch4#16) rebuild_fd_flm: switching algo to radix4_lockless
igc0: link state changed to DOWN
igc1: link state changed to UP
vlan09: link state changed to UP
vlan08: link state changed to UP
vlan01: link state changed to UP
vlan040: link state changed to UP
vlan04: link state changed to UP
vlan02: link state changed to UP
igc0: link state changed to UP
WARNING: attempt to domain_add(netgraph) after domainfinalize()
935.338437 [1173] generic_netmap_attach     Emulated adapter for vlan09 created (prev was NULL)
935.338458 [1078] generic_netmap_dtor       Emulated netmap adapter for vlan09 destroyed
935.338546 [1173] generic_netmap_attach     Emulated adapter for vlan09 created (prev was NULL)
935.666059 [ 321] generic_netmap_register   Emulated adapter for vlan09 activated
935.666146 [ 851] iflib_netmap_config       txr 4 rxr 4 txd 1024 rxd 1024 rbufsz 2048
935.666274 [ 851] iflib_netmap_config       txr 4 rxr 4 txd 1024 rxd 1024 rbufsz 2048
935.801747 [1173] generic_netmap_attach     Emulated adapter for vlan040 created (prev was NULL)
935.801766 [1078] generic_netmap_dtor       Emulated netmap adapter for vlan040 destroyed
935.801857 [1173] generic_netmap_attach     Emulated adapter for vlan040 created (prev was NULL)
935.801954 [ 321] generic_netmap_register   Emulated adapter for vlan040 activated
935.808541 [1173] generic_netmap_attach     Emulated adapter for vlan05 created (prev was NULL)
935.808562 [1078] generic_netmap_dtor       Emulated netmap adapter for vlan05 destroyed
935.808651 [1173] generic_netmap_attach     Emulated adapter for vlan05 created (prev was NULL)
935.808737 [ 321] generic_netmap_register   Emulated adapter for vlan05 activated
935.813452 [1173] generic_netmap_attach     Emulated adapter for vlan07 created (prev was NULL)
935.813470 [1078] generic_netmap_dtor       Emulated netmap adapter for vlan07 destroyed
935.813558 [1173] generic_netmap_attach     Emulated adapter for vlan07 created (prev was NULL)
935.813648 [ 321] generic_netmap_register   Emulated adapter for vlan07 activated
935.820242 [ 851] iflib_netmap_config       txr 4 rxr 4 txd 1024 rxd 1024 rbufsz 2048
935.820332 [ 851] iflib_netmap_config       txr 4 rxr 4 txd 1024 rxd 1024 rbufsz 2048
935.958708 [1173] generic_netmap_attach     Emulated adapter for vlan06 created (prev was NULL)
935.958728 [1078] generic_netmap_dtor       Emulated netmap adapter for vlan06 destroyed
935.958821 [1173] generic_netmap_attach     Emulated adapter for vlan06 created (prev was NULL)
935.958918 [ 321] generic_netmap_register   Emulated adapter for vlan06 activated
935.963221 [1173] generic_netmap_attach     Emulated adapter for vlan02 created (prev was NULL)
935.963241 [1078] generic_netmap_dtor       Emulated netmap adapter for vlan02 destroyed
935.963332 [1173] generic_netmap_attach     Emulated adapter for vlan02 created (prev was NULL)
935.963427 [ 321] generic_netmap_register   Emulated adapter for vlan02 activated
coretemp3: critical temperature detected, suggest system shutdown
coretemp3: critical temperature detected, suggest system shutdown
coretemp5: critical temperature detected, suggest system shutdown
coretemp7: critical temperature detected, suggest system shutdown
coretemp3: critical temperature detected, suggest system shutdown
igc0: promiscuous mode enabled
coretemp7: critical temperature detected, suggest system shutdown
coretemp7: critical temperature detected, suggest system shutdown
coretemp7: critical temperature detected, suggest system shutdown
coretemp3: critical temperature detected, suggest system shutdown
coretemp3: critical temperature detected, suggest system shutdown
coretemp7: critical temperature detected, suggest system shutdown
coretemp3: critical temperature detected, suggest system shutdown
coretemp7: critical temperature detected, suggest system shutdown
coretemp3: critical temperature detected, suggest system shutdown
coretemp7: critical temperature detected, suggest system shutdown
coretemp7: critical temperature detected, suggest system shutdown
coretemp7: critical temperature detected, suggest system shutdown
coretemp7: critical temperature detected, suggest system shutdown
coretemp7: critical temperature detected, suggest system shutdown
coretemp7: critical temperature detected, suggest system shutdown
coretemp3: critical temperature detected, suggest system shutdown
coretemp5: critical temperature detected, suggest system shutdown
coretemp3: critical temperature detected, suggest system shutdown
coretemp3: critical temperature detected, suggest system shutdown
coretemp7: critical temperature detected, suggest system shutdown
coretemp5: critical temperature detected, suggest system shutdown
coretemp7: critical temperature detected, suggest system shutdown
coretemp5: critical temperature detected, suggest system shutdown
coretemp3: critical temperature detected, suggest system shutdown
coretemp7: critical temperature detected, suggest system shutdown
coretemp3: critical temperature detected, suggest system shutdown
coretemp7: critical temperature detected, suggest system shutdown
coretemp5: critical temperature detected, suggest system shutdown
coretemp5: critical temperature detected, suggest system shutdown
coretemp3: critical temperature detected, suggest system shutdown
coretemp7: critical temperature detected, suggest system shutdown
coretemp7: critical temperature detected, suggest system shutdown
coretemp7: critical temperature detected, suggest system shutdown
coretemp5: critical temperature detected, suggest system shutdown
coretemp7: critical temperature detected, suggest system shutdown
coretemp5: critical temperature detected, suggest system shutdown
coretemp5: critical temperature detected, suggest system shutdown
coretemp7: critical temperature detected, suggest system shutdown
coretemp3: critical temperature detected, suggest system shutdown
coretemp3: critical temperature detected, suggest system shutdown
coretemp7: critical temperature detected, suggest system shutdown
coretemp7: critical temperature detected, suggest system shutdown
coretemp5: critical temperature detected, suggest system shutdown
coretemp5: critical temperature detected, suggest system shutdown
coretemp5: critical temperature detected, suggest system shutdown
coretemp3: critical temperature detected, suggest system shutdown
coretemp7: critical temperature detected, suggest system shutdown
coretemp3: critical temperature detected, suggest system shutdown
coretemp7: critical temperature detected, suggest system shutdown
coretemp5: critical temperature detected, suggest system shutdown
coretemp7: critical temperature detected, suggest system shutdown
coretemp5: critical temperature detected, suggest system shutdown
coretemp7: critical temperature detected, suggest system shutdown
coretemp3: critical temperature detected, suggest system shutdown
coretemp3: critical temperature detected, suggest system shutdown
coretemp7: critical temperature detected, suggest system shutdown
coretemp3: critical temperature detected, suggest system shutdown
coretemp1: critical temperature detected, suggest system shutdown
coretemp7: critical temperature detected, suggest system shutdown
coretemp5: critical temperature detected, suggest system shutdown
coretemp5: critical temperature detected, suggest system shutdown
coretemp3: critical temperature detected, suggest system shutdown
coretemp3: critical temperature detected, suggest system shutdown
coretemp7: critical temperature detected, suggest system shutdown
coretemp3: critical temperature detected, suggest system shutdown
coretemp7: critical temperature detected, suggest system shutdown
coretemp5: critical temperature detected, suggest system shutdown
coretemp5: critical temperature detected, suggest system shutdown
coretemp3: critical temperature detected, suggest system shutdown
coretemp7: critical temperature detected, suggest system shutdown
coretemp3: critical temperature detected, suggest system shutdown
coretemp7: critical temperature detected, suggest system shutdown
coretemp7: critical temperature detected, suggest system shutdown
coretemp3: critical temperature detected, suggest system shutdown
coretemp7: critical temperature detected, suggest system shutdown
coretemp3: critical temperature detected, suggest system shutdown
coretemp3: critical temperature detected, suggest system shutdown
coretemp5: critical temperature detected, suggest system shutdown
coretemp7: critical temperature detected, suggest system shutdown
coretemp7: critical temperature detected, suggest system shutdown
coretemp7: critical temperature detected, suggest system shutdown
coretemp5: critical temperature detected, suggest system shutdown
coretemp5: critical temperature detected, suggest system shutdown
coretemp7: critical temperature detected, suggest system shutdown
coretemp7: critical temperature detected, suggest system shutdown
coretemp7: critical temperature detected, suggest system shutdown
coretemp7: critical temperature detected, suggest system shutdown
coretemp7: critical temperature detected, suggest system shutdown
coretemp3: critical temperature detected, suggest system shutdown
coretemp3: critical temperature detected, suggest system shutdown
coretemp3: critical temperature detected, suggest system shutdown
coretemp3: critical temperature detected, suggest system shutdown
coretemp7: critical temperature detected, suggest system shutdown
coretemp3: critical temperature detected, suggest system shutdown
coretemp0: critical temperature detected, suggest system shutdown
coretemp7: critical temperature detected, suggest system shutdown
coretemp3: critical temperature detected, suggest system shutdown
coretemp7: critical temperature detected, suggest system shutdown
coretemp7: critical temperature detected, suggest system shutdown
coretemp3: critical temperature detected, suggest system shutdown
coretemp7: critical temperature detected, suggest system shutdown
coretemp7: critical temperature detected, suggest system shutdown
coretemp5: critical temperature detected, suggest system shutdown
coretemp0: critical temperature detected, suggest system shutdown
coretemp5: critical temperature detected, suggest system shutdown
coretemp7: critical temperature detected, suggest system shutdown
coretemp3: critical temperature detected, suggest system shutdown
coretemp7: critical temperature detected, suggest system shutdown
coretemp7: critical temperature detected, suggest system shutdown
coretemp3: critical temperature detected, suggest system shutdown
coretemp7: critical temperature detected, suggest system shutdown
coretemp7: critical temperature detected, suggest system shutdown
coretemp3: critical temperature detected, suggest system shutdown
coretemp3: critical temperature detected, suggest system shutdown
coretemp3: critical temperature detected, suggest system shutdown
coretemp5: critical temperature detected, suggest system shutdown
coretemp3: critical temperature detected, suggest system shutdown
coretemp3: critical temperature detected, suggest system shutdown
coretemp7: critical temperature detected, suggest system shutdown
coretemp7: critical temperature detected, suggest system shutdown
coretemp7: critical temperature detected, suggest system shutdown
coretemp3: critical temperature detected, suggest system shutdown
coretemp5: critical temperature detected, suggest system shutdown
coretemp7: critical temperature detected, suggest system shutdown
coretemp3: critical temperature detected, suggest system shutdown
coretemp7: critical temperature detected, suggest system shutdown
coretemp7: critical temperature detected, suggest system shutdown
coretemp3: critical temperature detected, suggest system shutdown
coretemp7: critical temperature detected, suggest system shutdown
coretemp3: critical temperature detected, suggest system shutdown
coretemp3: critical temperature detected, suggest system shutdown
coretemp1: critical temperature detected, suggest system shutdown
coretemp3: critical temperature detected, suggest system shutdown
coretemp5: critical temperature detected, suggest system shutdown
coretemp3: critical temperature detected, suggest system shutdown
coretemp3: critical temperature detected, suggest system shutdown
coretemp5: critical temperature detected, suggest system shutdown
coretemp3: critical temperature detected, suggest system shutdown
coretemp5: critical temperature detected, suggest system shutdown
coretemp7: critical temperature detected, suggest system shutdown
coretemp3: critical temperature detected, suggest system shutdown
coretemp3: critical temperature detected, suggest system shutdown
coretemp7: critical temperature detected, suggest system shutdown
coretemp7: critical temperature detected, suggest system shutdown
coretemp7: critical temperature detected, suggest system shutdown
coretemp7: critical temperature detected, suggest system shutdown
coretemp7: critical temperature detected, suggest system shutdown
coretemp3: critical temperature detected, suggest system shutdown
coretemp3: critical temperature detected, suggest system shutdown
coretemp3: critical temperature detected, suggest system shutdown
coretemp5: critical temperature detected, suggest system shutdown
coretemp3: critical temperature detected, suggest system shutdown
coretemp7: critical temperature detected, suggest system shutdown
coretemp3: critical temperature detected, suggest system shutdown
coretemp5: critical temperature detected, suggest system shutdown
coretemp3: critical temperature detected, suggest system shutdown
coretemp7: critical temperature detected, suggest system shutdown
coretemp3: critical temperature detected, suggest system shutdown
coretemp7: critical temperature detected, suggest system shutdown
coretemp7: critical temperature detected, suggest system shutdown
coretemp7: critical temperature detected, suggest system shutdown
coretemp7: critical temperature detected, suggest system shutdown
coretemp3: critical temperature detected, suggest system shutdown
coretemp7: critical temperature detected, suggest system shutdown
coretemp3: critical temperature detected, suggest system shutdown
coretemp7: critical temperature detected, suggest system shutdown
coretemp7: critical temperature detected, suggest system shutdown
coretemp5: critical temperature detected, suggest system shutdown
coretemp7: critical temperature detected, suggest system shutdown
coretemp3: critical temperature detected, suggest system shutdown
coretemp7: critical temperature detected, suggest system shutdown
coretemp3: critical temperature detected, suggest system shutdown
coretemp5: critical temperature detected, suggest system shutdown
coretemp5: critical temperature detected, suggest system shutdown
coretemp5: critical temperature detected, suggest system shutdown
coretemp7: critical temperature detected, suggest system shutdown
coretemp5: critical temperature detected, suggest system shutdown
coretemp3: critical temperature detected, suggest system shutdown
coretemp5: critical temperature detected, suggest system shutdown
coretemp5: critical temperature detected, suggest system shutdown
coretemp3: critical temperature detected, suggest system shutdown
coretemp3: critical temperature detected, suggest system shutdown
coretemp7: critical temperature detected, suggest system shutdown
coretemp7: critical temperature detected, suggest system shutdown
coretemp7: critical temperature detected, suggest system shutdown
coretemp7: critical temperature detected, suggest system shutdown
coretemp6: critical temperature detected, suggest system shutdown
coretemp7: critical temperature detected, suggest system shutdown
coretemp7: critical temperature detected, suggest system shutdown
coretemp7: critical temperature detected, suggest system shutdown
coretemp3: critical temperature detected, suggest system shutdown
coretemp7: critical temperature detected, suggest system shutdown
coretemp3: critical temperature detected, suggest system shutdown
coretemp0: critical temperature detected, suggest system shutdown
959.843286 [ 296] generic_netmap_unregister Emulated adapter for vlan06 deactivated
959.847697 [1078] generic_netmap_dtor       Emulated netmap adapter for vlan06 destroyed
959.849756 [ 296] generic_netmap_unregister Emulated adapter for vlan040 deactivated
959.849818 [1078] generic_netmap_dtor       Emulated netmap adapter for vlan040 destroyed
959.954261 [ 296] generic_netmap_unregister Emulated adapter for vlan05 deactivated
959.954313 [1078] generic_netmap_dtor       Emulated netmap adapter for vlan05 destroyed
959.956177 [ 296] generic_netmap_unregister Emulated adapter for vlan07 deactivated
959.956235 [1078] generic_netmap_dtor       Emulated netmap adapter for vlan07 destroyed
959.958255 [ 296] generic_netmap_unregister Emulated adapter for vlan02 deactivated
959.958321 [1078] generic_netmap_dtor       Emulated netmap adapter for vlan02 destroyed
959.960420 [ 296] generic_netmap_unregister Emulated adapter for vlan09 deactivated
959.961771 [1078] generic_netmap_dtor       Emulated netmap adapter for vlan09 destroyed
igc0: promiscuous mode disabled
Waiting (max 60 seconds) for system process `vnlru' to stop... done
Waiting (max 60 seconds) for system process `syncer' to stop...
Syncing disks, vnodes remaining... 2 0 0 0 0 0 done
All buffers synced.
Uptime: 20h34m46s

ACPI APIC Table: <ALASKA A M I >
FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 hardware threads
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
random: unblocking device.
ioapic0 <Version 2.0> irqs 0-119
Launching APs: 1 3 2 7 6 5 4
random: entropy device external interface
wlan: mac acl policy registered
kbd1 at kbdmux0
WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0.
efirtc0: <EFI Realtime Clock>
efirtc0: registered as a time-of-day clock, resolution 1.000000s
smbios0: <System Management BIOS> at iomem 0x43ca5000-0x43ca501e
smbios0: Version: 3.3, BCD Revision: 3.3
aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256>
acpi0: <ALASKA A M I >
ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - ^SPI1.SPFD.CVFD (20201113/dspkginit-605)
ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - ^SPI1.SPFD.CVFD (20201113/dspkginit-605)
ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - ^XHCI.RHUB.HS04.VI2C (20201113/dspkginit-605)
ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - ^XHCI.RHUB.HS04.VI2C (20201113/dspkginit-605)
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 19200000 Hz quality 950
Event timer "HPET" frequency 19200000 Hz quality 550
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0x3000-0x303f mem 0x6000000000-0x6000ffffff,0x4000000000-0x400fffffff irq 16 at device 2.0 on pci0
vgapci0: Boot video device
pcib1: <ACPI PCI-PCI bridge> irq 19 at device 6.0 on pci0
pci1: <ACPI PCI bus> on pcib1
nvme0: <Generic NVMe Device> mem 0x51600000-0x51603fff,0x51604000-0x516040ff irq 16 at device 0.0 on pci1
xhci0: <Intel Tiger Lake-LP Thunderbolt 4 USB controller> mem 0x6001110000-0x600111ffff at device 13.0 on pci0
xhci0: 32 bytes context size, 64-bit DMA
usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
xhci1: <Intel Tiger Lake-LP USB 3.2 controller> mem 0x6001100000-0x600110ffff irq 16 at device 20.0 on pci0
xhci1: 32 bytes context size, 64-bit DMA
usbus1 on xhci1
usbus1: 5.0Gbps Super Speed USB v3.0
pci0: <memory, RAM> at device 20.2 (no driver attached)
pci0: <simple comms> at device 22.0 (no driver attached)
ahci0: <AHCI SATA controller> port 0x3090-0x3097,0x3080-0x3083,0x3060-0x307f mem 0x51700000-0x51701fff,0x51703000-0x517030ff,0x51702000-0x517027ff irq 16 at device 23.0 on pci0
ahci0: AHCI v1.31 with 2 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 16 at device 0.0 on pci2
pci3: <ACPI PCI bus> on pcib3
pcib4: <PCI-PCI bridge> irq 19 at device 3.0 on pci3
pci4: <PCI bus> on pcib4
igc0: <Intel(R) Ethernet Controller I226-V> mem 0x51400000-0x514fffff,0x51500000-0x51503fff irq 19 at device 0.0 on pci4
igc0: Using 1024 TX descriptors and 1024 RX descriptors
igc0: Using 4 RX queues 4 TX queues
igc0: Using MSI-X interrupts with 5 vectors
igc0: Ethernet address: 00:90:27:e8:33:1f
igc0: netmap queues/slots: TX 4/1024, RX 4/1024
pcib5: <PCI-PCI bridge> irq 19 at device 7.0 on pci3
pci5: <PCI bus> on pcib5
pcib6: <ACPI PCI-PCI bridge> irq 17 at device 28.5 on pci0
pci6: <ACPI PCI bus> on pcib6
igc1: <Intel(R) Ethernet Controller I226-V> mem 0x51100000-0x511fffff,0x51200000-0x51203fff irq 17 at device 0.0 on pci6
igc1: Using 1024 TX descriptors and 1024 RX descriptors
igc1: Using 4 RX queues 4 TX queues
igc1: Using MSI-X interrupts with 5 vectors
igc1: Ethernet address: 00:90:27:e8:33:20
igc1: netmap queues/slots: TX 4/1024, RX 4/1024
pcib7: <ACPI PCI-PCI bridge> irq 18 at device 28.6 on pci0
pci7: <ACPI PCI bus> on pcib7
igc2: <Intel(R) Ethernet Controller I226-V> mem 0x50e00000-0x50efffff,0x50f00000-0x50f03fff irq 18 at device 0.0 on pci7
igc2: Using 1024 TX descriptors and 1024 RX descriptors
igc2: Using 4 RX queues 4 TX queues
igc2: Using MSI-X interrupts with 5 vectors
igc2: Ethernet address: 00:90:27:e8:33:21
igc2: netmap queues/slots: TX 4/1024, RX 4/1024
pcib8: <ACPI PCI-PCI bridge> irq 19 at device 28.7 on pci0
pci8: <ACPI PCI bus> on pcib8
igc3: <Intel(R) Ethernet Controller I226-V> mem 0x50b00000-0x50bfffff,0x50c00000-0x50c03fff irq 19 at device 0.0 on pci8
igc3: Using 1024 TX descriptors and 1024 RX descriptors
igc3: Using 4 RX queues 4 TX queues
igc3: Using MSI-X interrupts with 5 vectors
igc3: Ethernet address: 00:90:27:e8:33:22
igc3: netmap queues/slots: TX 4/1024, RX 4/1024
pcib9: <ACPI PCI-PCI bridge> irq 16 at device 29.0 on pci0
pci9: <ACPI PCI bus> on pcib9
igc4: <Intel(R) Ethernet Controller I226-V> mem 0x50800000-0x508fffff,0x50900000-0x50903fff irq 16 at device 0.0 on pci9
igc4: Using 1024 TX descriptors and 1024 RX descriptors
igc4: Using 4 RX queues 4 TX queues
igc4: Using MSI-X interrupts with 5 vectors
igc4: Ethernet address: 00:90:27:e8:33:23
igc4: netmap queues/slots: TX 4/1024, RX 4/1024
pcib10: <ACPI PCI-PCI bridge> irq 17 at device 29.1 on pci0
pci10: <ACPI PCI bus> on pcib10
igc5: <Intel(R) Ethernet Controller I226-V> mem 0x50500000-0x505fffff,0x50600000-0x50603fff irq 17 at device 0.0 on pci10
igc5: Using 1024 TX descriptors and 1024 RX descriptors
igc5: Using 4 RX queues 4 TX queues
igc5: Using MSI-X interrupts with 5 vectors
igc5: Ethernet address: 00:90:27:e8:33:24
igc5: netmap queues/slots: TX 4/1024, RX 4/1024
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
hdac0: <Intel Tiger Lake HDA Controller> mem 0x6001128000-0x600112bfff,0x6001000000-0x60010fffff irq 16 at device 31.3 on pci0
pci0: <serial bus> at device 31.5 (no driver attached)
acpi_button0: <Sleep Button> on acpi0
acpi_button1: <Power Button> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
acpi_syscontainer0: <System Container> on acpi0
acpi_syscontainer1: <System Container> on acpi0
atrtc0: <AT realtime clock> at port 0x70 irq 8 on isa0
atrtc0: Warning: Couldn't map I/O.
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
hwpstate_intel0: <Intel Speed Shift> on cpu0
hwpstate_intel1: <Intel Speed Shift> on cpu1
hwpstate_intel2: <Intel Speed Shift> on cpu2
hwpstate_intel3: <Intel Speed Shift> on cpu3
hwpstate_intel4: <Intel Speed Shift> on cpu4
hwpstate_intel5: <Intel Speed Shift> on cpu5
hwpstate_intel6: <Intel Speed Shift> on cpu6
hwpstate_intel7: <Intel Speed Shift> on cpu7
Timecounter "TSC-low" frequency 1401614042 Hz quality 1000
Timecounters tick every 1.000 msec
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)

Anyone else experiencing an increase in core temps after the upgrade?

Upgraded yesterday and I must say: superb job! I've been up almost 24 hours and it's smooth sailing so far.
OPNsense 24.7.7  - QEMU/KVM (Ubuntu), i9-9900K 16 core @ 5ghz, 16GB RAM, 64GB SSD, 2 dedicated SFP+ NICs

August 09, 2023, 06:03:10 PM #119 Last Edit: August 09, 2023, 06:07:59 PM by franco
> [09-Aug-2023 12:27:09 Etc/UTC] Error: Call to undefined function lock() in /usr/local/etc/inc/plugins.inc.d/dyndns/phpDynDNS.inc:158
Stack trace:

Ah great now we will have to deal with supporting dead plugins for an indefinite amount of time. This is truly horrible even after removal.

EDIT: this should bring it back for you for now:

# opnsense-patch 7333f37ed0 1130442142


Cheers,
Franco