Netgate 6100 w/ OpnSense ix[0-1] no go?

[bcookatpcsd]

I was able to get a 6100 and put OpnSense on it..

By default the installer takes the ig[0-3] lan ports and makes ig0 LAN and ig1 WAN

ix0 and ix1 are combo ports, but plugging copper into the ix0 does get link light but does not register link. Status stays as 'no carrier'.

Is there an ethtool equivalent.. or some way to enable/force the copper portion?

Code: [Select]

dmesg | grep ix0
ix0: <Intel(R) X553 N (SFP+)> mem 0x80400000-0x805fffff,0x80604000-0x80607fff at device 0.0 on pci9
ix0: Using 2048 TX descriptors and 2048 RX descriptors
ix0: Using 4 RX queues 4 TX queues
ix0: Using MSI-X interrupts with 5 vectors
ix0: allocated for 4 queues
ix0: allocated for 4 rx queues
ix0: Ethernet address: 90:ec:77:29:03:26
ix0: eTrack 0x8000084b PHY FW V65535
ix0: netmap queues/slots: TX 4/2048, RX 4/2048

uname -a
FreeBSD OPNsense.localdomain 13.1-RELEASE-p7 FreeBSD 13.1-RELEASE-p7 stable/23.1-n250411-85724e9ce22 SMP amd64
I found this from 2020.. but this does not seem to be related..

https://forums.freebsd.org/threads/intel-x553-driver-support-for-freebsd-12-1.75588/

Code: [Select]

root@OPNsense:~ # sysctl dev.ix.0 | grep driver
dev.ix.0.iflib.driver_version: 4.0.1-k
dev.ix.0.%driver: ix

Any suggestions?

Thanks in advance.