Wireguard Client Issues Passing Traffic

[shrekfx]

No changes made, connected to the tunnel on my cell and able to ping 8.8.8.8 but not able to do a traceroute.

[shrekfx]

I tried updating the gateway as well and still nothing.  It is weird though, I was able get to google.com and do a whatismyIP and I get the VPN IP of the end location.  But was not able to get to any other websites.

[Greelan]

Is there traffic shown both ways in the Status tab?

It is normally a sure sign of an issue that there is traffic only one way.

Double checked all keys are in the right place?

[shrekfx]

endpoint: 154.16.169.77:51820
  allowed ips: 0.0.0.0/0
  latest handshake: 47 seconds ago
  transfer: 4.69 MiB received, 1.21 MiB sent
  persistent keepalive: every 25 seconds

[Greelan]

Damn. Lol

This is a bit of a mystery. I can only suggest double checking the outbound NAT rule and that nothing else is interfering with it.

Have you tried turning on logging on the relevant rules and checking what's happening? Or running packet captures?

[shrekfx]

I'll do that. worse case i'll rebuild my opnsense and rebuild the vpn. lol I don't have much rules on it so it would be no huge deal, except for the one person that connect to my tunnel. 

I have looked at the logs on these rules and they all seem to be working that i could tell and i struggle with packet captures lol.

[Greelan]

You can do a pcap on OPNsense via the UI. Pretty easy