Newbie following OpnSense Road Warrior OpenVPN guide not working

[SideOfRanch]

I'm in vacation and trying to get my new OpnSense server configured for OpenVPN. I have acess via a server with TeamViewer install that's on my local  So I've gone through the guide twice fully and rebuilt everything after feeling more confident where I might've gone wrong.

Guide I'm referencing and happy to propose doc modifications, if I can figure out where I went wrong: https://docs.opnsense.org/manual/how-tos/sslvpn_client.html

I'm able to connect with my user ID using  MFA but then I can't access internet through the VPN or any of my LAN servers.

A few parts of the guide don't line up to the most recent interface but most of it did.

1. In the provided screenshots for the firewall rules on WAN and OpenVPN it isn't clear what order to put them in. I have a bunch of default rules in two folders. By default, it out both of the rules below the folders. I cannot figure out if that might be causing the issue? I'm using a vanilla install with almost no customization at the moment.
2. The page that seems to have the most variation to the guide is the OpenVPN server configuration.  Here is recommended configuration on that page above:
(Sorry for below formatting, in my cell but will fix when I can. Format is setting {line return} configuration recommendation.
Description

My SSL VPN Server

Server Mode

Remote Access (SSL/TLS + User Auth)

Backend for authentication

TOTP VPN Access Server

Protocol

UDP

Device Mode

tun

Interface

WAN

Local port

1194

TLS Authentication

Leave both on enabled (checked)

Peer Certificate Revocation List

N/A

Server Certificate

SSLVPN Server Certificate (CA: SSL VPN CA)

DH Parameters Length

4096 bit

Encryption algorithm

AES-256-CBC (256-bit key, 128-bit block)

Auth Digest Algorithm

SHA512 (512-bit)

Certificate Depth

One (Client+Server)

IPv4 Tunnel Network

10.10.0.0/24

IPv6 Tunnel Network

Leave Empty

Redirect Gateway

Leave Unchecked

IPv4 Local Network/s

192.168.1.0/24

IPv6 Local Network/s

Leave Empty

IPv4 Remote Network/s

Leave Empty

IPv6 Remote Network/s

Leave Empty

Concurrent connections

Leave Empty

Compression

Enabled with Adaptive Compression

Type-of-Service

Leave Unchecked

Duplicate Connections

Leave Unchecked

Disable IPv6

Checked

Dynamic IP

Leave Unchecked

Address Pool

Leave Checked

Topology

Leave Unchecked

DNS Default Domain

Leave Unchecked

DNS Servers

Leave Unchecked

Force DNS cache update

Leave Unchecked

NTP Servers

Leave Unchecked

NetBIOS Options

Leave Unchecked

Client Management Port

Leave Unchecked

Renegotiate time

0

1. No option to disable ipv6
2. Compression recommendation doesn't match directly any available setting

[bartjsmit]

Try Kirk for an alternative guide: https://kirkg.us/building-an-openvpn-server-with-opnsense/

Enjoy your break!

Bart...

[SideOfRanch]

Dang, wish the wizard was more clear from the outset, but I got it working with this! Thank you. Still have some kinks to work out but generally its connected on both my mobile phone and my laptop, so that's great!